Direct Attach SFP+ copper cable 10 Gigabit SFP+ with ultra low latency For servers, storage & switches short uplinks SFP+ connector on both sides ...

Up to 15x the speed & 10x the coverage of 802.11a, 802.11g networks Stylish & elegant design with easy mounting options (e.g. ceiling, wall & desktop) Concurrent operation in 2.4 G Hz & 5 G Hz radio band for maximum wireless throughput Backward compatibility with 802.11a, 802.11g & 802.11b network devices Integrated Power over Ethernet (IEEE 802.3af Po E) lowers deployment costs Centralized management via wireless controller (WC7520) for large deployments Security feature include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Internal antennas factory-optimized for maximum RF performance ...

NETGEAR FS105 5 Port 10/100 Desktop Switch NETGEARs cost effective FS105 Fast Ethernet Switch provides your network with high-speed, 10/100 Mbps auto-sensing connectivity. This 5-port switch is incredibly easy to set-up, just plug in your Ethernet networking cables & connect a power cord. Engineered without the need for internal fans, the FS105 operates silently. Compact Solidly built in small sizes that are easy to position when space is at a premium. Simple to Use Once you connect the hardware, your switch is operating! Quiet No fan means no noise, which helps maintain a peaceful atmosphere in your busy office. Great value Competitively priced—compare them to others & see the difference. Product Highlights All 5 ports switch automatically senses the right networking speed: 10 or 100 Mbps Engineered without the need for internal fans, the FS105 operates silently No software to configure, the FS105 switch operates as soon as you connect it Housed in a compact, sturdy metal case for years of dependable use Number of Built-in Ports 5 x 10/100 Mbps port
- Auto-Uplink
- Auto-Sensing
- Fall/ Half Duplex LEDs Power Collision/ Rx/ Tx & speed indicators for each port Link, speed, & activity indicators built into each RJ-45 port Performance Transmission Method Store-&-forward Non-blocking, wire-speed frame forward rate Forwarding Rate 14, 800 frames/sec max for 10M port 148, 000 frames/sec max for 100M port Network latency Less than 20 microseconds for 64-byte frames for 100 Mbps to 100 Mbps transmission

Dimensions 158 x 103 x 27 mm (Wx Dx H) (6.2" x 4.1" x 1.1 inches) Manufactures Warranty 5 years for unit 1 year for power adapter Package Contents NETGEAR FS105 Fast Ethernet Switch Wall-mount kit AC adapter Quick Installation Guide Warranty & registration card Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.




...

NETGEAR’s popular FS100 series desktop switches, known for its reliability & performance, provide your LAN with high-speed, 10/100 Mbps auto-sensing connectivity for as many as 5, 8, or 16 users. Just plug in your Ethernet cables, connect a power cord, & you’re ready to go-there’s no software to configure. They negotiate to the fastest possible connection & with Auto Uplink™ technology, these switches automatically figure out if the link needs a straightthrough or cross-over connection, & makes the right choice. Existing 10BASE-T devices are easily integrated within higher bandwidth environments, with full wire speeds on all ports of either 10 Mbps or 100 Mbps. Engineered without the need for internal fans, they operate silently. & each of these very compact switches is housed in a sturdy metal case for years of dependable use. At Your Service Five, eight, or sixteen ports provide LAN access for many users. Every port supports up to 200 Mbps in dedicated bandwidth & traffic is forwarded flawlessly with automatic flow control. Compact Solidly built in small sizes that are easy to position when space is at a premium. Ideal for conference rooms, class rooms, study groups or small offices. Place it on any flat surface or use the included wall mount kit to tuck it out of the way. Simple To Use Once you connect the hardware, your switch is operating! Auto negotiation takes care of the speed & duplex, while Auto Uplink takes care of the MDI/MDI-X connection. Eliminate the need for toggle switches or special crossover cables. Quiet No fan means no noise, which helps maintain a peaceful atmosphere in your busy office. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Pro Safe FS108P provides power & data from a single point, using Power over Ethernet (Po E) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link & four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary Po E or non-Po E equipment. In addition, it discontinues the power when Po E devices are disconnected. Easy & reliable, the Pro Safe FS108P automatically determines Po E requirements, speed, duplex, & cable type using Auto Uplink. The affordably priced Pro Safe FS108P delivers Po E to any small business network that wants to simplify the installation of wireless access points & IP-based surveillance cameras. These devices are optimally installed on a ceiling or high on a wall, away from most electrical outlets. Po E eliminates the requirement for a dedicated electrical outlet to power these devices. This allows for flexibility in situating devices where AC power is difficult to access & lowers installation costs. Compact & flexible, the Pro Safe FS108P is ideal for small business network that want to inexpensively use Po E to deploy wireless access points & IP-based network surveillance cameras. Five, eight, or sixteen ports provide LAN access for many users. Every port supports up to 200 Mbps in dedicated bandwidth & traffic is forwarded flawlessly with automatic flow control. Compact Solidly built in small sizes that are easy to position when space is at a premium. Ideal for conference rooms, class rooms, study groups or small offices. Place it on any flat surface or use the included wall mount kit to tuck it out of the way. Simple To Use Once you connect the hardware, your switch is operating! Auto negotiation takes care of the speed & duplex, while Auto Uplink takes care of the MDI/MDI-X connection. Eliminate the need for toggle switches or special crossover cables. Quiet No fan means no noise, which helps maintain a peaceful atmosphere in your busy office. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

NETGEAR FS116P 16 Port Fast Ethernet Switch w/8 Po E Ports Connectivity with Po E The Netgear FS116P ‘ Power over Ethernet’ (Po E) enabled switch provides 16 x 10/00 Fast Ethernet ports for data communications. 8 of these ports can also provide Po E, the IEEE 802.3af industry standard to deliver power as well as data over the same Ethernet cable. Power over Ethernet greatly simplifies the positioning & installation of wireless & IP devices, such as wireless access points, IP-based CCTV cameras & Vo IP phones. Po E eliminates the need to position dedicated electrical sockets near each & every mobile wireless device, lowering installation costs. The Netgear FS116P Po E switch enables network administrators to position their IP & wireless devices anywhere they choose, i.e. high up on ceilings or walls, even where AC power would have difficult to access & expensive to install. An advanced auto-sensing algorithm provides power only to 802.3af end devices, so there is no need to be concerned about damaging non-Po E equipment. In addition, as with all of NETGEAR’s power over Ethernet switches, the Netgear FS116P discontinues the power when Po E devices are disconnected. Easy to set-up & reliable, the Netgear Pro Safe FS116P unmanaged Power over Ethernet switch automatically determines Po E requirements, speed, duplex & cable type of each connection using Auto Uplink™ technology. value for your money With data network switching & Power over Ethernet integrated into a single casing, the Netgear Prosafe FS116P unmanaged switch saves space, reduces cabling costs & eliminates the need for dedicated electrical outlets for wireless & IP devices. All this minimises disruption in the office & lowers installation costs by eliminating the need for electricians & extension reels. Product Highlights Data switching & Power-over-Ethernet (Po E) in one unit 16 data switching ports, 8 of which provide Po E Reduces cables & eliminates need for dedicated electrical outlets Locate wireless devices high on walls or ceilings for max coverage Auto Uplink™ auto detects speed, duplex & cable type Automatically detects Po E devices & supplies power as needed Compact & Flexible design at an attractive price Number of Built-in Network Ports 16 x 10/100 Mbps port
- Auto-negotiation of MDI-II (One MDI-X MIDI uplink port) LEDs Power, Po E Maximum Power Per Port: Link, Activity, Speed, Po E Active, Po E Status Performance Transmission Method Store-&-forward Bandwidth 3.2 Gbps Network latency Less than 20 ìs for 64-byte frames in store-&-forward mode for 100 Mbps to 100 Mbps transmission Mac Address 48 bit MAC addresses Automatic MAC Address Learning Address table up to 1K MAC address

Dimensions W 287 mm (11.3”) D 103 mm (4.1”) H 27 mm (1.1”) Manufactures Warranty 5 years for unit 2 year for power adapter Package Contents Netgear Pro Safe 16 Port 10/100 Switch with Power over Ethernet FS116P AC Adapter Wall-mount kit Installation guide Warranty/ Support Information card Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.


...

NETGEAR FS726T 24 Port Pro Safe Smart Fast Ethernet Switch w/2 Gigabit Ports Two Gigabit Ports Plus Easy Browser
- based Management
...

Netgear FS726TP 24 Port 10/100 Smart Ethernet Switch w/2 Gigabit ports & Po E Power over Ethernet (Po E) Connectivity 12 of the 24 ports available with the Netgear FS726TP Fast smart switch can be utilised to supply Power over Ethernet (Po E), using the industry standard IEEE 802.3af. With Po E your business can easily deploy wireless access points, IP-based surveillance cameras & Vo IP telephones. Po E enables you to position these devices on a ceiling or high up on a wall, typically away from most electrical sockets. The Netgear FS726TP gives you the ability to be able to place devices anywhere, even where AC power is not available or difficult to install, significantly lowers deployment costs. With Po E electricians & extension reels are not required. Smart Management at an Affordable Price Then Netgear FS726TP ensures that every computer, laptop or console user connected to your wireless network can work & play safely. Switching Connectivity As well as the 24 Fast Ethernet ports, the Netgear FS726TP Fast smart network switch features 2 Gigabit Ethernet ports, each capable of powering 2000 Mbps of data throughput in full duplex mode. These 2 Gigabit ports are ideal for connectivity to demanding users or servers. The two optional fiber ports** enable secure, long distance connections. As fiber connections are far less prone to interference than standard Ethernet cables, communications to the network’s backbone or servers are better protected. As with all Netgear switches, the Netgear FS726TP smart switch features Auto Uplink™ technology, which automatically adjusts for different Ethernet cables. The FS726TP is standards based for easy integration of Ethernet (10 Mbps), Fast Ethernet (10/100 Mbps) & Gigabit Ethernet (10/100/1000 Mbps). ** Use with Netgear’s AGM731F/723F GBIC switch modules. Product Highlights 24 x Fast (10/100) switch Ports, plus 2 x Gigabit (10/100/100) Ports 12 of the 24 10/100 Ports also provide Po E SFP slot for high speed fiber connections over extended distances** Performance monitoring, port configuration & traffic control Port Trunking for increased bandwidth Class of Service for prioritisation Durable 17" metal casing, with optional rack mount kit ** Use with NETGEAR’s AGM731F/732F/733 GBIC switch modules. Number of Built-in Ports 24 x 10/100 Mbps port
- Auto-Uplink
- Auto-Sensing
- Fall/ Half Duplex 12 x Po E Enabled LEDs System: Power, Po E Maximum Power Per port: Link, Activity, Speed, Po E Active, Po E Fault Performance Transmission Method Store-&-forward Network latency <20µs for 64-byte frames in store-&-forward mode for 100 Mbps to 100 Mbps transmission

Dimensions 440 x 205 x 43 mm (Wx Dx H) (17.8 x 8.1 x 1.6 inches) Manufactures Warranty 5 years for unit Package Contents 24-port Smart Switch with Gigabit Ports FS726TP Rubber footpads Power cord Rack-mount kit Resource CD Installation guide Warranty/ Support information card Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.




...

The NETGEAR Pro Safe " Intelligent Edge" Gigabit L2+ Managed Switch GSM7224P consists of 24 ports Gigabit with Po E+ connectivity, & 4 ports dual-speed SFP with fiber connectivity. Intelligent Edge series deliver a secure & flexible access in campus, commercial & enterprise converged environments: Wireless access points, IP telephony & video-surveillance. Combining superior resiliency & advanced security, GSM7224P provides comprehensive Layer 2, Lite Layer 3 & Layer 4 switching, including 16K MAC table size, 64 routing interfaces & 16 static routes. The NETGEAR Pro Safe " Intelligent Edge" simplifies converged data deployments with state-of-the-art capabilities. Co S Layer 2 prioritization & Diff Serv Layer 3 & 4 policies allow for 1 Kbps ingress & egress TCP/UDP granularity. LLDP-MED (Media Endpoint Discovery) automatically configures IP phones Qo S & VLAN settings. 24 ports Po E+ with 380W Po E budget L2+ routing with 64 IP interfaces for VLAN routing Intelligent edge switch for converged Vo IP, Video & Wireless enterprise networks ...

Power-Packed For a high-speed network on a small scale, nothing delivers likes this compact powerhouse. Equipped with five auto-speed-sensing 10/100/1000 Mbps UTP ports, the Netgear GS105 is a affordable switch giving your network the capacity to handle huge workloads. The Netgear GS105 moves very large files across your network instantly, & lets you painlessly integrate 10, 100, & 1000 Mbps devices on your network. Packed with ease-of-use features to simplify your networking experience, Netgear's GS105 trim design makes it an easy fit for a desk or mounted on a wall. The durable metal chassis protects interior working parts & the fan-less design results in silent operation. Matched with Netgear’s thorough testing, the Netgear GS105 switch provides long-lasting performance you can count on. Potent Netgear GS105 moves huge files fast! Features five high-speed, auto-switching 10/100/1000 Mbps Ethernet connections. & because Gigabit Ethernet is a full duplex standard, you get up to 2000 Mbps on each port. Capable Netgear GS105 Integrates 10, 100, & 1000 Mbps devices on the same network. Every port automatically senses the right speed & full/half duplex mode, & Auto Uplink technology automatically adjusts for straight-through or crossover cables. Trim Sized to save space, this sturdy metal 5-port switch is compact & fits easily on a desk or mounts on a wall, making it ideal for home & small office environments. Easy-going LEDs embedded in RJ-45 jacks make for easy monitoring. Provides noiseless operation. Supports PC or Mac O/S Product Highlights Instant plug-&-play switch 5 x 10/100/1000 Mbps ports All ports Auto Uplink for auto-detection of MDI/MDI-X wiring Non-blocking, wire-speed performance Durable metal chassis External power adapter Limited 5 year warranty on unit, 2 years power supply Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...