3 x 3 multiple-input, multiple-output (MIMO) with three spatial streams Dual band concurrent in 2.4 & 5 GHz radio band for maximum wireless throughput Stylish & elegant design with easy mounting options (e.g., ceiling, wall & desktop) Backward compatibility with 802.11a, 802.11g & 802.11b network devices Integrated Power over Ethernet (IEEE 802.3af & 802.3at Po E) lowers deployment costs Deploy wireless coverage over large areas with point-to-point & point-to-multipoint bridging via Wireless Distribution System (WDS) Security features include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Internal antennas factory-optimized for maximum RF performance Advanced Security with Wireless Intrusion Detection (WIDS) & Wireless Intrusion Prevention (WIPS) support 802.11n Beamforming to improve range & maximizes data rates Device-based Qo S to provide differentiated service level agreement to each user & device type Bandsteering to load balance clients between 2.4 & 5 GHz Redundant dual Ethernet ports to ensure maximum reliability ...

The flagship model of the Pro Safe firewall family
- the SRX5308 is perfect for even the most demanding business networks. The
...

Direct Attach SFP+ copper cable SFP+ connector on both sides Fits into any 10 GE SFP+ interface (front) Drives 10 Gigabit Ethernet ...

NETGEAR WAG102 Pro Safe Dual Band A/B/G Wireless Access Point Wireless Networking is Secure The Netgear WAG102 Dual Band Wireless Access Point comes with the latest security proto-cols, including the highest available wireless security standard, WPA2 Enterprise. 128/152-bit WEP encryption & advanced AES 256-bit encryption ensures the privacy of all wireless communication. 802.1x RADIUS server authentication controls wireless network access & centralises user authorisation across the wireless LAN. The Netgear WAG102 also supports MAC authentication with a 256-user Access Control List (ACL) to limit network access to specified users & VPN pass-through for private communi-cations between head office & branches or remote home workers. This names just a few wireless security features available with the Netgear WAG102 Dual Band Access Point. Management & Power over Ethernet (Po E) Integrated 802.3af-based Power over Ethernet support means that there is no need to locate the Netgear WAG102 close to an electrical power output or trail cables across the floor: Power can be transmitted over the Ethernet network instead. The Netgear WAG102 also supports SNMP (Simple Network Management Protocol) & associated network man-agement software (including NETGEAR Pro Safe™ NMS100) to integrate your office wireless LAN with your wired infrastructure. Easy to Set-up & Use The Netgear WAG102 Dual Band Wireless Access Point is simple to set-up & use. It is ple-num rated, appropriate for placement above drop-down ceilings & under raised floors. This access point is also equipped with the convenient Smart Wizard™ browser-based interface for quick installation. Physical Specifications

Dimensions (H x W x D): 32 x 190.5 x 122 mm (1.25 x 7.5 x 4.8 in.) Weight. 62kg (1.3 lb) Wireless Standard: IEEE 802.11a up to 108 Mbps; 802.11g up to 108 Mbps Wireless Access Point Antennas: Two (2) detachable antennas: (1) 5 d Bi, 2.4 GHz & (1) 5 d Bi 5 GHz Physical Interfaces LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (Po E) support Power adapter: 12 VDC, 1.0A power supply; plug is localized to country of sale. Six (6) LEDs: Power, Test, 100 Mbps, Link/ACT, & WLAN 802.11g Antenna Connector: Two (2) reverse SMA antenna connectors Network Management Remote configuration & management through Web browser, SNMP SNMP management supports SNMP MIB I, MIB II, & 802.11 MIB Advanced Wireless Features Point-to-point wireless bridge mode Point-to-multipoint wireless bridge mode Repeater mode Adjustable Transmit Power Control (TPC) from 100 m W down to 0 m W Typical Maximum Power Output 802.11b mode, 1 to 11 Mbps + 19 d Bm 802.11g mode, 6 to 24 Mbps + 18 d Bm 802.11g mode, 36, 48 & 54 Mbps + 17/16/16 d Bm Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance. Receive Sensitivity 802.11b 2 Mbps -94 d Bm 5.5 Mbps -92 d Bm 11 Mbps -90 d Bm 802.11g 6 Mbps -91 d Bm 9 Mbps -91 d Bm 12 Mbps -90 d Bm 18 Mbps -87 d Bm 24 Mbps -85 d Bm 36 Mbps -80 d Bm 48 Mbps -75 d Bm 54 Mbps -70 d Bm 802.11a 6 Mbps -92 d Bm 9 Mbps -91 d Bm 12 Mbps -90 d Bm 18 Mbps -86 d Bm 24 Mbps -84 d Bm 36 Mbps -79 d Bm 48 Mbps -72 d Bm 54 Mbps -70 d Bm Power Over Ethernet Required 4.3 W Security 40/64-, 128-, & 152-bit WEP encryption Block SSID Broadcast VPN pass-through support MAC address filtering with access control lists – up to 256 users 802.1x RADIUS support with EAP TLS, TTLS, PEAP Wi-Fi Protected Access (WPA2) Secure Socket Layer (SSL) remote management login Standards, Safety & Electromagnetic Conformance IEEE 802.11g (2.4 GHz Frequency B&, DSSS Modulation Type) IEEE 802.3af Power over Ethernet (Po E) FCC Part 15 Subpart B & Subpart C CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1 (2001-12), EN 300 328-2 (2001-12), R&TTE Directive 99/5/EC, CSIPR22 (B), AS/NZS 3548 (B) Plenum Rated IEEE 802.11g (2.4 GHz Frequency B&, DSSS Modulation Type) IEEE 802.11a IEEE 802.3af Power over Ethernet (Po E) FCC Part 15 Subpart B, Subpart C & E C-Tick: AS/NZ 3548 Class B CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002-08), EN 301 489-1 V1.4.1 (2002-08), EN 300 328-1 (2001-12), EN 300 328-2 (2003--4), EN301893 (5 G Hz), EN60601, R&TTE Directive 99/5/EC Environmental Specifications Operating temperature: 0 to 40° C (32 to 104° F) Operating humidity: 90% maximum relative humidity, noncondensing

...

Small form factor access point for in-room wired & wireless access The WN370 Wall Mount Access Point is designed specifically for in-room coverage for wired & wireless access for small & medium hotels & education dormitories. The WN370 has a sleek, elegant, & compact design that allows the AP to be deployed in an inconspicuous manner & can be installed quickly by non-technical personnel. The WN370 is powered with Po E with 1 Gbps uplink & 4 (100 Mbps) Ethernet data ports, plus additional voice port for connectivity to digital phones. The WN370 is centrally managed by an enterprise class wireless controller with automatic RF & power tuning with guest captive portal & comprehensive wireless security. Small form factor & inconspicuous appearance The aesthetically pleasing design of the WN370 allows the access point to blend nicely in the hotel room & school dormitories. WN370 provides wired access directly to the users, where the traditional form factor Access Points are normally installed on the ceiling, away from the access of the users that need wired connectivity. The WN370 is installed with easy attachment to the junction box & appears with a nice decorative appearance. Fast installation & Po E powered The WN370 can be installed easily & less than 5 minutes. The WN370 ships with mounting brackets & fits into both US & EU standard electric junction boxes. Only 4 screws are needed to reliably install the WN370 to the wall with low protrusion. The WN370 is powered via Power over Ethernet on the 1 Gbps uplink. Simply connect a Ethernet cable between the WN370 & a Po E enabled switch & the WN370 is up & running. There is no separate power cord needed. Flexible & easy deployment WN370 can be installed easily & does not need sophisticated skills of engineers. WN370s are generally deployed in room, especially effective in areas where deploying the access points in traditional locations (such as ceiling mounted or hallways of dormitories & hotels) are not feasible. Because the WN370 is designed to provide coverage in a specific room, where the RF containment is more well defined, no extensive site survey is required. Finally, because the WN370 comes with four Ethernet ports, users can plug in multiple wired devices without the requirement to pull additional cables from the access point to the wiring closet, thereby saving both time & money to meet the requirements of multiple Ethernet ports per room Centrally managed with complete enterprise features The WN370 is centrally managed by the WC7600 Wireless Controller. All of the configurations can be centrally configured & stored at the WC7600. Once the WN370 is discovered by the WC7600, it will receive the latest firmware & the updated configuration provided by the WC7600. The WC7600 will automatically & dynamically adjust the RF frequency & the output power of the WN370 to ensure optimal frequency reuse & the best power setting to provide ubiquitous coverage of the intended location. Comprehensive site survey is generally not needed, thereby making the installation & wireless design of WN370 as simple as it gets. ...

The NETGEAR Pro Safe line of business networking products offers a wide array of easy-to-use, professional-grade switching, wireless, software & security solutions. Pro Safe products provide an abundance of intelligent, innovative & practical features, addressing the unique requirements of business networks. Securely connects up to 5 remote office or traveling users to your office network via VPN Stateful packet inspection firewall for robust business security IPsec VPNs connect remote users as well as remote sites, with optional software Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Improved coverage & 10x greater speed than Wireless-G Simultaneous 802.11n support while backward compatible with 802.11g devices Enterprise security features include WPA2, WPA, rogue AP detection & 802.1x with RADIUS support Supports IEEE 802.3af Po E for easy placement in optimal locations
- desktop, wall-mount or ceiling. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

Netgear WNDAP350 is the latest business class access point, offering Dual-Band 802.11n with up to 15 times the speed, up to 600 Mbps & ten times more coverage than legacy networks. The Netgear WNDAP350 access point is designed to allow for wireless networks inside a business & provide the bandwidth needed for services such as Vo IP, video conferencing & other high-bandwidth applications. The Netgear WNDAP350 Access Point supports both point-to-point & point-to-multipoint configurations. Key Features Up to 15x the speed & 10x the coverage of 802.11a, 802.11g networks Operation in 5 GHz radio band to avoid interference from 802.11b or 802.11g network devices Concurrent operation in 2.4 GHz & 5 GHz radio band Backward compatibility with 802.11a, 802.11g & 802.11b network devices Integrated 802.3af Po E eliminates extra cables & enables optimal placement of the access point Comprehensive SNMP functionality for advanced network management Deploy wireless coverage over large areas with point-to-point & point-to-multipoint bridging via Wireless Distribution System (WDS) Security features include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Plenum-rated for safe & convenient placement above drop-down ceilings Metal case

Includes:: Kensington lock slot for anti-theft Internal antennas factory-optimized for maximum RF performance Antenna take-offs enable optional accessory antenna attachment for 2.4 GHz operations Lifetime hardware warranty Netgear WNDAP350 Access Point utilises the 2.4 G Hz & 5 G Hz frequencies to allow more bandwidth for different devices & needs, reduce interference & support speeds up to 600 Mbps! Performance
- Wireless N with Concurrent dual band operation with quality of service Mobility – Up to 15x the speed & 10x the coverage of legacy products Security – Full enterprise security with WAP, WPA2, 802.1x with Radius & built in rogue AP detection Advanced Speed & Range with Comprehensive Internet Security Up to 15x the speed & 10x the coverage of 802.11g networks Concurrent operation in 2.4 GHz & 5 GHz radio band for maximum wireless throughput Backward compatibility with 802.11a, 802.11g & 802.11b network devices Security features include WPA, WPA2, rogue AP detection & 802.1x with RADIUS support Support for 802.3af Po E for optimal placement of access point


...

Industry's first 28-port 10-Gigabit Smart Managed Switch, Purposely Designed for SMB with Cost-Effective 10 G Base-T Connectivity & Advanced L2+/ Layer 3 Lite As a leading provider of network equipment for SMBs, NETGEAR understands the importance of a reliable & high performance network to SMB customers. With the growth of virtualization, cloud-based services & applications like Vo IP, video streaming & IP surveillance, SMB networks need to extend beyond simple reliability to higher speed & performance. The 10-Gigabit Smart Managed Switch series from NETGEAR presents the right solution for this requirement; delivering unprecedented non-blocking 10-Gigabit bandwidth at an affordable cost ...

Viruses & malware hosted on web pages, email phishing attacks, spam, virus infested emails, & other threats are now all part of a regular repertoire of sophisticated blended attacks that bypass traditional firewalls with ease. Small businesses have been the ones most seriously affected as small businesses, unlike their enterprise counterparts, often lack the time & resources to fully harden & secure their networks from these threats. Moreover, such threats have signaled a change in the threat landscape: previously, threats to small businesses could largely be considered "push" type threats wherein hackers specifically targeted small businesses
- a relatively rare occurrence given the prevalence of larger & richer targets in the medium & large business space. However, the advent of Web 2.0 technologies & cloud computing has largely shifted the threat landscape to one characterized largely by "pull" attacks wherein end users use Web 2.0 & cloud computing technologies to "pull" threats into the organization. Because comprehensive network security solutions require an abundance of processing power to examine network traffic in real time, existing SMB all-in-one security solutions often use rudimentary security technologies that trade comprehensiveness for speed. True security must satisfy the requirements in both speed & coverage. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...