Each Cisco Aironet radio product is designed to perform in a variety of environments. Implementing the antenna system can greatly improve coverage & performance. To optimize the overall performance of a Cisco wireless LAN, it is important to understand how to maximize radio coverage with the appropriate antenna selection & placement. Designed for use indoor or outdoors, this antenna comes with both wall mount & articulating mast mount hardware. It has a plenum rated pigtail cable of 36". ...

Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice & video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public & private operate with maximum performance, security, & flexibility. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 600 Series Office Extend Access Points provide highly secure enterprise wireless coverage to the home. These dual&8209;b&, 802.11n access points extend the corporate network to home teleworkers & mobile contractors. The access point connects to the home’s broadband Internet access & establishes a highly secure tunnel to the corporate network so that remote employees can access data, voice, video, & cloud services for a mobility experience consistent with that at the corporate office. The dual-b&, simultaneous support for 2.4-GHz & 5-GHz radio frequencies helps assure that corporate devices are not affected by congestion caused by common household devices that use the 2.4&8209;GHz b&. The Cisco Aironet 600 Series Office Extend Access Points are purposely designed for the teleworker by supporting secure corporate data access & maintaining connectivity for personal home devices with segmented home traffic. Features Performance with Investment Protection - Dual-radio, 802.11n access point - Backward-compatible with 802.11a/b/g clients Remote Connectivity to Corporate Resources - Supports up to three corporate service set identifiers (SSIDs) & 15 wireless clients - Four Ethernet ports: Up to two for corporate access & the rest for personal use - Supports voice-over-Wi-Fi with dual-mode phones, soft phones, or Cisco Unified Wireless IP Phones - Split tunnel for printing
- use your personal printer while connected to the corporate WLAN - Split tunnel for Internet Traffic
- provides control over how Internet bound traffic is handled Easy Installation - Sleek design ideal for desktop placement Simplified Network Management - Minimal setup & maintenance requirements (zero-touch end-user deployment) - Numerous controller-based deployment options - Management similar to corporate WLAN, using the same infrastructure & devices Secure Connections - Supports highly secure corporate wireless connectivity to employees’ homes - Allows spouses, partners, & children to access the Internet without introducing additional security risks to corporate policy - Personal Firewall
- Provides port/application protection for personal network traffic


...

Every wireless LAN deployment is different. When engineering an in-building solution, varying facility sizes, construction materials, & interior divisions raise transmission & multipath considerations. When implementing a building-to-building solution, distance, physical obstructions between facilities, & number of transmission points must be taken into account. Cisco is committed to providing the best access points, client adapters, & bridges in the industry
- & is also committed to providing a complete solution for any wireless LAN deployment. Cisco has the widest range of antennas, cable, & accessories available from any wireless manufacturer. The Cisco Aironet AIR-ANT5135DG-R is a 5 GHz antenna for access point & bridge equipment that enables a customized wireless solution for almost any installation. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

Cisco Aironet 2.4-GHz access point antennas are compatible with all Cisco RP-TNC-equipped access points. Coupling the appropriate antenna & access point allows for efficient coverage in any facility, as well as better reliability at higher data rates. ...

Cisco Aironet 3.5-d Bi Articulated Dipole Antenna operates in the 5-GHz frequency band & is designed for use with Cisco Aironet 5-GHz radio products using a reverse-polarity Neil Councilman connector (RP-TNC). The antenna has an articulated base that can be rotated 360 degrees at the connection point & from 0 to 90 degrees at its knuckle with detents at 45 & 90 degrees. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

System Requirements This antenna is designed for use with Cisco Aironet access points that support simultaneous operation in the 2.4 GHz band & the 5 GHz band & that have dual-band antenna ports, labeled as such in orange text. Features The antenna has an articulated base that can be rotated 360 degrees at the connection point & from 0 to 90 degrees at its joint.

Specification Antenna type - Dual-band dipole Operating frequency range
- 2400 to 2500 MHz
- 5150 to 5850 MHz Nominal input impedance - 50 Ohms VSWR - Less than 2:1 Peak Gain @ 2.4. GHz -2 d Bi Peak Gain @ 5 GHz - 4 d Bi Elevation plane 3d B beamwidth @2.4 GHz - 63 degrees Elevation plane 3d B beamwidth @ 5 GHz - 39 degrees Connector type - RP-TNC plug Antenna length - 6.63 in. (168.5 mm) Antenna width - 0.83 in (21 mm) Radome length - 4.88 in. (124 mm) Weight -1.3 oz Operating temperature -20°C to 60°C (-4° to 140°F) Storage temperature -40°C to 85°C (-40°F to 185°F) Environment - Indoor, office



...

The next generation of Cisco Aironet 802.11n access points requires the use of dual-band external antennas to make them fully functioning units. As these access points take greater advantage of the multiple-input multiple-output (MIMO) features supported under the 802.11n standard, the number of radio transceivers per frequency band has increased. Using dual-band antenna ports allows the access point to support these added transceivers while maintaining a reasonably low number of antenna connections. Each dual-band antenna can transmit or receive Wi-Fi signals in both the 2.4-GHz & 5-GHz bands simultaneously. ...

Cisco Aironet Dual Band Omni Antenna
- Antenna
- outdoor
- 7 d Bi (for 5 GHz), 4 d Bi (for 2.4 GHz)
- omni-directional



...

Overvoltage transients can be created through lightning static discharges, switch processes, direct contact with power lines, or through earth currents. The Cisco Aironet AIR-ACC245LA-R Lightning Arrestor limits the amplitude & duration of disturbing interference voltages & improves the overvoltage resistance of in-line equipment, systems, & components. A lightning arrestor installed according to these mounting instructions balances the voltage potential, thus preventing inductive interference to parallel signal lines within the protected system. The Cisco Aironet AIR-ACC245LA-R Lightning Arrestor is designed for use with Cisco Aironet access points & bridges but can be used Cisco Aironet radio device that utilizes an RP-TNC connector. ...