With the industry’s only enterprise class 4x 4 MIMO, three-spatial-stream access points that support the IEEE’s new 802.11ac

Specification, the Cisco Aironet 3700 Series delivers industry-leading performance & a High Density Experience (HD Experience) for both the enterprise & service provider markets. The Aironet 3700 Series extends support to a new generation of Wi-Fi clients, such as smartphones, tablets, & high-performance laptops that have integrated 802.11ac support. In its first implementation, 802.11ac wave 1 provides a rate of up to 1.3 Gbps, roughly triple the rates offered by today’s high-end 802.11n access points. This provides the necessary foundation for enterprise & service provider networks alike to stay ahead of the performance & bandwidth expectations & needs of their wireless users. Due to its convenience, wireless access is increasingly the preferred form of network connectivity for corporate users. Along with this shift, there is an expectation that wireless should not slow down user’s day-to-day work, but should enable a high-performance experience while allowing users to move freely around the corporate environment. By Utilizing a Purpose-built Innovative Chipset with the Best-in-class RF Architecture for a High Density Experience (HD Experience).

...

Cisco Aironet bridge antennas allow for extraordinary transmission distances between two or more buildings. AIR-ANT2506 antenna is designed for outdoor short-range point-to-multipoint applications. PRODUCT

Features: Approximate Indoor Range at 1 Mbps
- 5000 ft. (1525m); Approximate Indoor Range at 11 Mbps
- 1580 ft. (480m). Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.



...

Each Cisco Aironet radio product is designed to perform in a variety of environments. Implementing the antenna system can greatly improve coverage & performance. To optimize the overall performance of a Cisco wireless LAN, it is important to understand how to maximize radio coverage with the appropriate antenna selection & placement. Designed for use indoor or outdoors, this antenna comes with both wall mount & articulating mast mount hardware. It has a plenum rated pigtail cable of 36". ...

Cisco is the worldwide leader in networking for the Internet. Cisco provides the broadest line of solutions for transporting data, voice & video within buildings, across campuses, or around the world. Cisco solutions ensure that networks both public & private operate with maximum performance, security, & flexibility. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 600 Series Office Extend Access Points provide highly secure enterprise wireless coverage to the home. These dual&8209;b&, 802.11n access points extend the corporate network to home teleworkers & mobile contractors. The access point connects to the home’s broadband Internet access & establishes a highly secure tunnel to the corporate network so that remote employees can access data, voice, video, & cloud services for a mobility experience consistent with that at the corporate office. The dual-b&, simultaneous support for 2.4-GHz & 5-GHz radio frequencies helps assure that corporate devices are not affected by congestion caused by common household devices that use the 2.4&8209;GHz b&. The Cisco Aironet 600 Series Office Extend Access Points are purposely designed for the teleworker by supporting secure corporate data access & maintaining connectivity for personal home devices with segmented home traffic. Features Performance with Investment Protection - Dual-radio, 802.11n access point - Backward-compatible with 802.11a/b/g clients Remote Connectivity to Corporate Resources - Supports up to three corporate service set identifiers (SSIDs) & 15 wireless clients - Four Ethernet ports: Up to two for corporate access & the rest for personal use - Supports voice-over-Wi-Fi with dual-mode phones, soft phones, or Cisco Unified Wireless IP Phones - Split tunnel for printing
- use your personal printer while connected to the corporate WLAN - Split tunnel for Internet Traffic
- provides control over how Internet bound traffic is handled Easy Installation - Sleek design ideal for desktop placement Simplified Network Management - Minimal setup & maintenance requirements (zero-touch end-user deployment) - Numerous controller-based deployment options - Management similar to corporate WLAN, using the same infrastructure & devices Secure Connections - Supports highly secure corporate wireless connectivity to employees’ homes - Allows spouses, partners, & children to access the Internet without introducing additional security risks to corporate policy - Personal Firewall
- Provides port/application protection for personal network traffic


...

Cisco Aironet 2.4-GHz access point antennas are compatible with all Cisco RP-TNC-equipped access points. Coupling the appropriate antenna & access point allows for efficient coverage in any facility, as well as better reliability at higher data rates. ...

Cisco single white dipole antenna with an RP-TNC connector antenna provides indoor omni directional coverage & is designed for use in the 2400-2500 MHz frequency b&. It has a 90-foot articulation radius. It can be used with all radios that utilize an RP-TNC antenna connector. ...

Cisco Aironet 3.5-d Bi Articulated Dipole Antenna operates in the 5-GHz frequency band & is designed for use with Cisco Aironet 5-GHz radio products using a reverse-polarity Neil Councilman connector (RP-TNC). The antenna has an articulated base that can be rotated 360 degrees at the connection point & from 0 to 90 degrees at its knuckle with detents at 45 & 90 degrees. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

System Requirements This antenna is designed for use with Cisco Aironet access points that support simultaneous operation in the 2.4 GHz band & the 5 GHz band & that have dual-band antenna ports, labeled as such in orange text. Features The antenna has an articulated base that can be rotated 360 degrees at the connection point & from 0 to 90 degrees at its joint.

Specification Antenna type - Dual-band dipole Operating frequency range
- 2400 to 2500 MHz
- 5150 to 5850 MHz Nominal input impedance - 50 Ohms VSWR - Less than 2:1 Peak Gain @ 2.4. GHz -2 d Bi Peak Gain @ 5 GHz - 4 d Bi Elevation plane 3d B beamwidth @2.4 GHz - 63 degrees Elevation plane 3d B beamwidth @ 5 GHz - 39 degrees Connector type - RP-TNC plug Antenna length - 6.63 in. (168.5 mm) Antenna width - 0.83 in (21 mm) Radome length - 4.88 in. (124 mm) Weight -1.3 oz Operating temperature -20°C to 60°C (-4° to 140°F) Storage temperature -40°C to 85°C (-40°F to 185°F) Environment - Indoor, office



...

The next generation of Cisco Aironet 802.11n access points requires the use of dual-band external antennas to make them fully functioning units. As these access points take greater advantage of the multiple-input multiple-output (MIMO) features supported under the 802.11n standard, the number of radio transceivers per frequency band has increased. Using dual-band antenna ports allows the access point to support these added transceivers while maintaining a reasonably low number of antenna connections. Each dual-band antenna can transmit or receive Wi-Fi signals in both the 2.4-GHz & 5-GHz bands simultaneously. ...