More From Contributor

Use the Extended Camera Base Plate to mount a camera to the Ronin 2. ...

Available

Fold-away Feet are used to balance the Ronin 2 on the ground or other level surfaces so that it doesn't tip over. ...

Available

The detachable design offers increased flexibilty with a greater tilt movement range by allowing you to remove the bottom half of the Grip. This also allows the Grip to be broken down into an easy to transport size. When connected with the Quick Connect for Ready Rig, markers on either sides of the Grip serve as reference tick marks for easier vertical positioning. ...

Available

The LANC Control Cable controls cameras with a LANC port, such as the BMCC, Sony FS5, or Sony FS7, by connecting them to the RSS port on the Ronin 2's Power Hub. ...

Available

Use the Motion Block when shooting at high-speeds for enhanced gimbal performance. ...

Available

Use the Pan Axis Quick-Lock to lock the pan axis in place when Ronin 2 is working in Pan Lock mode. ...

Available

The Ronin 2 Power Cable allows remote mounting of the Dual TB50 Battery Mount. Connect the power cable from the DC Out port on the Battery Mount to the DC In port on the Ronin 2. ...

Available

The Ronin 2 Power Hub provides 3 industry standard power/data connectors, powering accessories at 14.4V. These rear facing ports not only provide power but are also able to transmit data. ...

Available

Upgraded high torque motors allow it to support a wider range of cameras, resist high winds & G-forces caused when mounted to a car & keep it moving smoothly in flight. ...

Available

DJI Ronin 2 Mitchell Mount Adapter

The Ronin 2 Mitchell Mount Adapter can be used together with the Ronin 2 Universal Mount to install the Ronin 2 on a carrier, such as a jib or dolly, with a Mitchell mount. The adapter has M8, 8mm, 1/4”-20, and 3/8”-16 holes, allowing other compatible devices to be attached.