More From Contributor

The Ronin 2 150 mm Ball Mount Adapter can be used together with the Ronin 2 Universal Mount to install the Ronin 2 on a carrier, such as a jib or dolly, with a 150 mm ball mount. The adapter has M8, 1/4”-20, & 3/8”-16 holes, allowing other compatible devices to be attached. ...

Available

To install the Focus system & other accessories, attach the 15mm Focus Rod & Mount to the camera, then mount the camera onto the Ronin 2. ...

Available

The 2-pin Power Cable powers a video link by connecting the 2-pin DC IN port on the video link to one of the 14.4V ports on Ronin 2. ...

Available

The ARRI Alexa Mini Power Cable powers an ARRI Alexa Mini camera by connecting the BAT port on the camera to the 14.4V Accessory Power Port on Ronin 2's tilt axis. ...

Available

The ARRI Alexa Mini Start/ Stop Cable controls an ARRI Alexa Mini while recording video by connecting the EXT connector on the ARRI Alexa Mini to the RSS port on Ronin 2 's Power Hub. ...

Available

The Build-Your-Own Power Cable powers an external device by connecting the device to the 14.4V Accessory Power Port on the Ronin 2. The red wire is a 14.4V power cable, & the black wire is for the ground (GND). ...

Available

Mount the Ronin 2 C-Stand Bracket to a C-Stand or other devices with a diameter of 15 mm to attach the Ronin 2 gimbal. ...

Available

DJI Ronin 2 Accessory Mount

The Ronin 2 Accessory Mount utilizes a quick-release design allowing tool-free installation of itself onto the Ronin 2 Grip.The Accessory Mount comes with a 1/4" screw at the center of the top surface, one 3/8"-16, two 1/4"-20, and four M4 screw holes to mount compatible accessories such as universal arms, wireless video transmitters, or field monitors.