More From Contributor

The 2-pin Power Cable powers a video link by connecting the 2-pin DC IN port on the video link to one of the 14.4V ports on Ronin 2. ...

Available

The Ronin 2 Accessory Mount utilizes a quick-release design allowing tool-free installation of itself onto the Ronin 2 Grip. The Accessory Mount comes with a 1/4" screw at the center of the top surface, one 3/8"-16, two 1/4"-20, & four M4 screw holes to mount compatible accessories such as universal arms, wireless video transmitters, or field monitors. ...

Available

The ARRI Alexa Mini Power Cable powers an ARRI Alexa Mini camera by connecting the BAT port on the camera to the 14.4V Accessory Power Port on Ronin 2's tilt axis. ...

Available

The ARRI Alexa Mini Start/ Stop Cable controls an ARRI Alexa Mini while recording video by connecting the EXT connector on the ARRI Alexa Mini to the RSS port on Ronin 2 's Power Hub. ...

Available

Mount the Ronin 2 C-Stand Bracket to a C-Stand or other devices with a diameter of 15 mm to attach the Ronin 2 gimbal. ...

Available

The CAN Bus Cable is used to connect the 14.4V Accessory Power Port on the Ronin 2 to the CAN1 port on a DJI A3 fight controller. ...

Available

Use the Ronin 2 CAN-Bus Control Cable to connect the Ronin 2 gimbal & the Ronin 2remote controller, Force Pro or Master Wheels for wired control. ...

Available

DJI Ronin 2 Build-Your-Own Power Cable

The Build-Your-Own Power Cable powers an external device by connecting the device to the 14.4V Accessory Power Port on the Ronin 2. The red wire is a 14.4V power cable, and the black wire is for the ground (GND).