The radio plug-in dimmer has the same construction as the radio switching socket FS20ST Part No. 62 30 04-62. However, the connected lamps can not only be switched, but instead their brightness can also be controlled. It can be used with conventional bulbs (resistive loads) & conventional halogen transformers (inductive loads). The integrated timer allows switching on briefly for 1 s up to 4.5 h or dimming up & down softly during the timer period. ...

The upper-and lower dimming takes place by capacitive contact-free sensors, in which the position of sensor surface & light is determined by finger. Totally 15 brightness level & out are available, which are not necessarily navigated along the "slider-way" by finger; but certainly selection of the favourite brightness spot is possible directly by the tip. the last position of finger is carried as FS20-command for Dimmer The FS20-Dimmer-Slider is set very flexibly, as the sender unit is provided for the installation in Standard-UP-switch & by the help of adapter frames (refer Internet-offer), the adaptation to the respective switching programme can take place in house. The programming of FS20-command can follow separately on two canals so that two independent illuminated scenes are controlled. The programming can take place by integrated IR- receiver diode & can also follow via FS20 IRP (64 63 95). By three covers with delivery (each 1 x in black & in white is pressed, 1 x transparent, no-pressure for individual designing ), & flexible, optical adaptation to ambient is also possible. Delivery without 50-mm-Adapter frames ...

The power pack module is designed to actuate up to 36 FS20 actors in combination with the FS20 EAM radio receiver (not included in scope of delivery)
- e.g.FS20 DH20 or FS20 SH. It provides the FS20 EAM radio receiver with voltage, amplifies the data received from this module & transmits them to the FS20 actors via a 2-wire bus.
...

The FS20 IRP simplifies a programming & a configuration of the FS20 systems completely substantially. It extends besides the functional range of selected transmitters of the FS20 program All configuration of the transmitters (addressing, command assignment, switching-on or dimming time, channel assignment, etc.) are to be clearly set & can documented via the provided Windows software in addition for every key of the transmitter, macros with up to 3 actions can be stored
- so far that was not possible on the normal programming of the! The finished configurations can be stored on the PC & released by USB (Universal Serial Bus) to the FS20 IRP This is then released by infrared on the FS20 transmitter
...

The FS20 FMS radio-controls any FS20 switch actors such as the FS20 ST radio socket or the surface-mounted FS20 AS4 4-channel switch as soon as the main equipment connected to it is switched on or off. This permits having the garden or house lighting switched on as soon as the garage door is opened, for instance. A timer function can be used to switch off the consumers automatically.
You can also use it the opposite way round, e.g. to tell you when the washing machine has finished. In this case the FS20 FMS signals that the washing machine has finished & sends a switch command to the FS20 SIG radio transmitter, for instance. Here the timer can be programmed to delay the transmitter signal so that the transmitter only transmits after the programmed delay. For appliances that consume power when they are switched off (st&-by), you can set the response threshold of the FS20 FMS in several increments. As a real FS20 device, the FS20 FMS can be integrated into the FS20 code & address system.
...

Using programmable roller shutter control, it is possible to realise a visually unnoticed radio controlling of electric-driven roller shutters, awnings & venetian blinds. Roller shutter switch can be operated though compact flush-mounted housing & all FS20-centres are controlled through the sender of FS20-system & also through direct key. In addition to manual & time- or event-driven switching function, a programmable timer function is available to adjust runtime of the actuator. ...

On this compact hand transmitter there are 8 buttons for various control functions. This means you can dim & switch on & off 4 wireless receivers, independently of the FHZ 1000 wireless home system. Naturally you can also use this remote control for addressing & timer programming the receivers. ...

This surface-mounted radio switch means that you can operate two different consumers simultaneously in combination with your FS20 radio switch system or via the FHZ 1000 Radio Home Centre. Here two potential-free relay DTCs are available that switch on alternately (never simultaneously). This even makes reliable control of directions possible as required with electric door & gate drives. Three operating modes allow activating a switch output, e.g. for the duration of actuating a button on the transmitter, for a freely programmable time ranging from 1 s to 4.5 h or permanently up to the next switch-off pulse of the transmitter. Thanks to simple parallel connection to already existing buttons, installation into existing systems is no problem & existing functions are in no way affected. ...

This radio twilight transmitter is designed to telecontrol various radio switches of the FS20 radio system. It can telecontrol these on two channels based on the intensity of the ambient brightness. The brightness response threshold & the type of switch command execution on the receiver, the switching direction & the filter time to avoid fast switching processes can be programmed separately for each channel. in addition, the timers of the respective FS20 receivers can be programmed from the twilight transmitter. ...

Switch module for use in the FS20 DIN rail system. The module can be operated directly on the device itself, as well as via any transmitter of the FS20 radio switch system. A programmable timer is integrated (duty cycle 1 s to 4.5 h). Power supply & switch signal feeding via the FS20 SEH power pack. Radio reception via the FS20 EAM radio receiver in combination with the power pack. ...