Designed for use in small meeting rooms & classrooms, the SP-1100P are Visions most cost-effective audio solution & represent fantastic value. Great sound quality & Visions trademark ease of installation are key features of this product. ...

New to the Vision range are the new SP-1300 loudspeakers, designed to compliment the AV & C range of Vision audio amplifiers. Optimized for presentations, these high-quality speakers output clear, intelligible audio with a wide dispersion to cover wide areas. Achieve high sound pressure levels with clarity. ...

New to the Vision range are the new SP-1300 loudspeakers, designed to compliment the AV & C range of Vision audio amplifiers. Optimized for presentations, these high-quality speakers output clear, intelligible audio with a wide dispersion to cover wide areas. Achieve high sound pressure levels with clarity. ...

The SP-5000 has an integrated circuit which decodes audio received via USB (Universal Serial Bus) & sends the analog audio signal to an installed Techconnect amplifier or an external amplifier. Simply route the USB (Universal Serial Bus) from the PC to the loudspeakers. The PC will recognize them as an audio output device. An attractive curved chassis & grille compliment the finish of an interactive whiteboard or flat panel installation. When connecting USB (Universal Serial Bus) to an interactive whiteboard the decoder must be powered. Power can be shared with a Techconnect Amplifier power supply if installed. ...

Vision TC2-AMP2 amplifier will deliver up to 20 watts into the Vision CS-1600 speakers, & work faultlessly in any environment: corporate, education, training, & Home audio systems plus presentation & back ground music. Vision Techconnect TC2 amplifier has 2 stereo inputs on the rear & 1 x 3.5 mm stereo mini-jack socket on the front. Clip-in modular design plus a 45 mm deep surface mount back box. By using the low-impedance digital amplifier chip technology the Techconnect Amp 2 module outputs a massive 2 x 20 w RMS but fits into the space of a Techconnect module, can be wall mounted or sunk into a partition wall having a minimum depth of 45 mm. ...

The days of passing around a cable to share content on a big screen in a meeting are gone. The " Techconnect Select" is an HDMI dongle which fits to an HDMI cable, & plugs into your laptop. When a user is ready to share their screen they just press the SELECT button on the dongle. The Techconnect Select sends a control signal back down the HDMI cable to the HDMI switcher which is hidden out of sight. ** Users in Control** Instead of passing a cable or reaching for a control device, users can switch right at their PC
- no training required. ** Up to Four Users** Techconnect Select works with the Techconnect TC2-HDMI41 HDMI switcher (sold separately) which supports up to four dongles. ** Tidy** Attach the HDMI switcher under the table (it comes with mounting ears), feed the cables up through a Techconnect Tilt table-mounted faceplate, & all the users see is the HDMI cables. ** Any Cable** The HDMI cable

Specification has spare wires for control signals, so any HDMI cable works. The Select uses these wires to get the control signal back to the switcher. TC2-SELECT top Any Presentation Device Works for any device with HDMI output including iPads (lightning to HDMI adaptor required). ** Confidence** A power light tells the user they are connected & ready to go, & a link light shows if you're the active user. ** Retrofit** If users have a Techconnect HDMI switcher & want to add the Techconnect Select functionality they can. (Note: Vision switchers with audio output via coaxial & toslink do not support Techconnect Select) ** Buy in Package or Individually** Let Vision take the confusion out of ordering; buy a package which has all the parts you need as shown in the application images on this page. See package contents table at bottom of this page. ** Specifications** PRODUCT DIMENSIONS: 49 x 21.5x 10.5 mm (length x width x height) PACKAGED DIMENSIONS: 58 x 32 x 15 mm PRODUCT WEIGHT: 13.5 g PACKAGED WEIGHT:


...

The days of passing around a cable to share content on a big screen in a meeting are gone. The " Techconnect Select" is an HDMI dongle which fits to an HDMI cable, & plugs into your laptop. When a user is ready to share their screen they just press the SELECT button on the dongle. The Techconnect Select sends a control signal back down the HDMI cable to the HDMI switcher which is hidden out of sight. ** Users in Control** Instead of passing a cable or reaching for a control device, users can switch right at their PC
- no training required. ** Up to Four Users** Techconnect Select works with the Techconnect TC2-HDMI41 HDMI switcher (sold separately) which supports up to four dongles. ** Tidy** Attach the HDMI switcher under the table (it comes with mounting ears), feed the cables up through a Techconnect Tilt table-mounted faceplate, & all the users see is the HDMI cables. ** Any Cable** The HDMI cable

Specification has spare wires for control signals, so any HDMI cable works. The Select uses these wires to get the control signal back to the switcher. TC2-SELECT top Any Presentation Device Works for any device with HDMI output including iPads (lightning to HDMI adaptor required). ** Confidence** A power light tells the user they are connected & ready to go, & a link light shows if you're the active user. ** Retrofit** If users have a Techconnect HDMI switcher & want to add the Techconnect Select functionality they can. (Note: Vision switchers with audio output via coaxial & toslink do not support Techconnect Select) ** Buy in Package or Individually** Let Vision take the confusion out of ordering; buy a package which has all the parts you need as shown in the application images on this page. See package contents table at bottom of this page. ** Specifications** PRODUCT DIMENSIONS: 49 x 21.5x 10.5 mm (length x width x height) PACKAGED DIMENSIONS: 58 x 32 x 15 mm PRODUCT WEIGHT: 13.5 g PACKAGED WEIGHT:


...

A major cost component of cables is copper, so cheap cables have less copper & a thick outer cable jacket to fool the buyer into thinking they are getting something they are not. Compromising can result in cables which don't support high quality Audio & results in flagging & ingress of noise interference. The cross-sectional area of Tecconnect cable conductors allows sufficient current-carrying capacity to support high quality transmission of audio signals, & the shielding is evenly wound. One end or the TC2-10M2PHO cable is pre-terminated with a phoenix captive screw connector ready to plug into back of a Techconnect V2 module & 2 RCA (Phonon) molded plugs on the other end that can be simply plugged into your TV, DVD Player, Amplifier or other compatible device. Techconnect cables give you the speed of a pre-terminated system with the flexibility you sometimes need so just in case you need to shorten a cable or to pull a cable through a small hole or cavity? Or if you need more than 7 meter but less than 10 m & no where to hide the excess cable just unscrew & remove the phoenix connector, cut the cable to length, prepare the wire ends for re-termination to the Phoenix screw connector. ...

A major cost component of cables is copper, so cheap cables have less copper & a thick outer cable jacket to fool the buyer into thinking they are getting something they are not. Compromising can result in cables which don't support high quality Audio & results in flagging & ingress of noise interference. The cross-sectional area of Tecconnect cable conductors allows sufficient current-carrying capacity to support high quality transmission of audio signals, & the shielding is evenly wound. One end or the TC2-10M2PHO cable is pre-terminated with a phoenix captive screw connector ready to plug into back of a Techconnect V2 module & 2 RCA (Phonon) molded plugs on the other end that can be simply plugged into your TV, DVD Player, Amplifier or other compatible device. Techconnect cables give you the speed of a pre-terminated system with the flexibility you sometimes need so just in case you need to shorten a cable or to pull a cable through a small hole or cavity? Or if you need more than 7 meter but less than 10 m & no where to hide the excess cable just unscrew & remove the phoenix connector, cut the cable to length, prepare the wire ends for re-termination to the Phoenix screw connector. ...

A major cost component of cables is copper, so cheap cables have less copper & a thick outer cable jacket to fool the buyer into thinking they are getting something they are not. Compromising can result in cables which dont support high resolutions & results in flagging, image jitter & or Ghosting. The cross-sectional area of Techconnect cable conductors allows sufficient current-carrying capacity to support high resolution signal, & the shielding is evenly wound. Techconnect cables give you the speed of a pre-terminated system with the flexibility you sometimes need. One end or the TC2-15M1PHO cable is pre-terminated with a phoenix captive screw connector ready to plug into back of Techconnect V2 module & a molded yellow RCA video plug on the other end. Need to shorten a cable or to pull a cable through a small hole or cavity? If you need more than 10 meter but less than 15 m & no where to hide the excess cable just unscrew & remove the phoenix connector, cut the cable to length, prepare the wire ends for re-termination to the Phoenix screw connector. ...