For applications where more than two pairs of speakers are required installers use "100 V line" amplifiers which are specially designed to power many loudspeakers
- for example in retail environments or train stations. Visions loudspeaker & amplifiers are all "low-impedance" because of the superior sound quality & greater power output. Instead of restricting installers to one or the other Vision offers the unique add-on SP-100V transformers which simply "retrofit" to any low impedance speakers. The SP-100V inserts between the 100 V amplifier & the low impedance loudspeaker allowing any low-impedance loudspeakers need to be used with a 100 V line amplifier.
...

For applications where more than two pairs of speakers are required installers use "100 V line" amplifiers which are specially designed to power many loudspeakers
- for example in retail environments or train stations. Vision's loudspeaker & amplifiers are all "low-impedance" because of the superior sound quality & greater power output. Instead of restricting installers to one or the other Vision offers the unique add-on SP-100V transformers which simply "retrofit" to any low impedance speakers. The SP-100V inserts between the 100 V amplifier & the low impedance loudspeaker allowing any low-impedance loudspeakers need to be used with a 100 V line amplifier.
...

Designed for use in small meeting rooms & classrooms, the SP-1100P are Visions most cost-effective audio solution & represent fantastic value. Great sound quality & Visions trademark ease of installation are key features of this product. ...

New to the Vision range are the new SP-1300 loudspeakers, designed to compliment the AV & C range of Vision audio amplifiers. Optimized for presentations, these high-quality speakers output clear, intelligible audio with a wide dispersion to cover wide areas. Achieve high sound pressure levels with clarity. ...

New to the Vision range are the new SP-1300 loudspeakers, designed to compliment the AV & C range of Vision audio amplifiers. Optimized for presentations, these high-quality speakers output clear, intelligible audio with a wide dispersion to cover wide areas. Achieve high sound pressure levels with clarity. ...

Vision TC2-AMP2 amplifier will deliver up to 20 watts into the Vision CS-1600 speakers, & work faultlessly in any environment: corporate, education, training, & Home audio systems plus presentation & back ground music. Vision Techconnect TC2 amplifier has 2 stereo inputs on the rear & 1 x 3.5 mm stereo mini-jack socket on the front. Clip-in modular design plus a 45 mm deep surface mount back box. By using the low-impedance digital amplifier chip technology the Techconnect Amp 2 module outputs a massive 2 x 20 w RMS but fits into the space of a Techconnect module, can be wall mounted or sunk into a partition wall having a minimum depth of 45 mm. ...

By using latest low-impedance digital amplifier chip technology the Techconnect Amp 2 module outputs a massive 2 x 20w RMS (at 8 ohms) but fits into the space of a Techconnect module. Attractive & discreet; the Vision wall speakers offer clear, powerful audio reinforcement in a compact form factor. The SP-1300 has a warm, well-rounded bass, with smooth high frequencies that extend beyond 20k Hz. Match these to a low-impedance amplifier & be amazed how big they sound! ...

The days of passing around a cable to share content on a big screen in a meeting are gone. The " Techconnect Select" is an HDMI dongle which fits to an HDMI cable, & plugs into your laptop. When a user is ready to share their screen they just press the SELECT button on the dongle. The Techconnect Select sends a control signal back down the HDMI cable to the HDMI switcher which is hidden out of sight. ** Users in Control** Instead of passing a cable or reaching for a control device, users can switch right at their PC
- no training required. ** Up to Four Users** Techconnect Select works with the Techconnect TC2-HDMI41 HDMI switcher (sold separately) which supports up to four dongles. ** Tidy** Attach the HDMI switcher under the table (it comes with mounting ears), feed the cables up through a Techconnect Tilt table-mounted faceplate, & all the users see is the HDMI cables. ** Any Cable** The HDMI cable

Specification has spare wires for control signals, so any HDMI cable works. The Select uses these wires to get the control signal back to the switcher. TC2-SELECT top Any Presentation Device Works for any device with HDMI output including iPads (lightning to HDMI adaptor required). ** Confidence** A power light tells the user they are connected & ready to go, & a link light shows if you're the active user. ** Retrofit** If users have a Techconnect HDMI switcher & want to add the Techconnect Select functionality they can. (Note: Vision switchers with audio output via coaxial & toslink do not support Techconnect Select) ** Buy in Package or Individually** Let Vision take the confusion out of ordering; buy a package which has all the parts you need as shown in the application images on this page. See package contents table at bottom of this page. ** Specifications** PRODUCT DIMENSIONS: 49 x 21.5x 10.5 mm (length x width x height) PACKAGED DIMENSIONS: 58 x 32 x 15 mm PRODUCT WEIGHT: 13.5 g PACKAGED WEIGHT:


...

The days of passing around a cable to share content on a big screen in a meeting are gone. The " Techconnect Select" is an HDMI dongle which fits to an HDMI cable, & plugs into your laptop. When a user is ready to share their screen they just press the SELECT button on the dongle. The Techconnect Select sends a control signal back down the HDMI cable to the HDMI switcher which is hidden out of sight. ** Users in Control** Instead of passing a cable or reaching for a control device, users can switch right at their PC
- no training required. ** Up to Four Users** Techconnect Select works with the Techconnect TC2-HDMI41 HDMI switcher (sold separately) which supports up to four dongles. ** Tidy** Attach the HDMI switcher under the table (it comes with mounting ears), feed the cables up through a Techconnect Tilt table-mounted faceplate, & all the users see is the HDMI cables. ** Any Cable** The HDMI cable

Specification has spare wires for control signals, so any HDMI cable works. The Select uses these wires to get the control signal back to the switcher. TC2-SELECT top Any Presentation Device Works for any device with HDMI output including iPads (lightning to HDMI adaptor required). ** Confidence** A power light tells the user they are connected & ready to go, & a link light shows if you're the active user. ** Retrofit** If users have a Techconnect HDMI switcher & want to add the Techconnect Select functionality they can. (Note: Vision switchers with audio output via coaxial & toslink do not support Techconnect Select) ** Buy in Package or Individually** Let Vision take the confusion out of ordering; buy a package which has all the parts you need as shown in the application images on this page. See package contents table at bottom of this page. ** Specifications** PRODUCT DIMENSIONS: 49 x 21.5x 10.5 mm (length x width x height) PACKAGED DIMENSIONS: 58 x 32 x 15 mm PRODUCT WEIGHT: 13.5 g PACKAGED WEIGHT:


...

A major cost component of cables is copper, so cheap cables have less copper & a thick outer cable jacket to fool the buyer into thinking they are getting something they are not. Compromising can result in cables which don't support high quality Audio & results in flagging & ingress of noise interference. The cross-sectional area of Tecconnect cable conductors allows sufficient current-carrying capacity to support high quality transmission of audio signals, & the shielding is evenly wound. One end or the TC2-10M2PHO cable is pre-terminated with a phoenix captive screw connector ready to plug into back of a Techconnect V2 module & 2 RCA (Phonon) molded plugs on the other end that can be simply plugged into your TV, DVD Player, Amplifier or other compatible device. Techconnect cables give you the speed of a pre-terminated system with the flexibility you sometimes need so just in case you need to shorten a cable or to pull a cable through a small hole or cavity? Or if you need more than 7 meter but less than 10 m & no where to hide the excess cable just unscrew & remove the phoenix connector, cut the cable to length, prepare the wire ends for re-termination to the Phoenix screw connector. ...