Vision TC2-AMP2 amplifier will deliver up to 20 watts into the Vision CS-1600 speakers, & work faultlessly in any environment: corporate, education, training, & Home audio systems plus presentation & back ground music. Vision Techconnect TC2 amplifier has 2 stereo inputs on the rear & 1 x 3.5 mm stereo mini-jack socket on the front. Clip-in modular design plus a 45 mm deep surface mount back box. By using the low-impedance digital amplifier chip technology the Techconnect Amp 2 module outputs a massive 2 x 20 w RMS but fits into the space of a Techconnect module, can be wall mounted or sunk into a partition wall having a minimum depth of 45 mm. ...

By using latest low-impedance digital amplifier chip technology the Techconnect Amp 2 module outputs a massive 2 x 20w RMS (at 8 ohms) but fits into the space of a Techconnect module. Attractive & discreet; the Vision wall speakers offer clear, powerful audio reinforcement in a compact form factor. The SP-1300 has a warm, well-rounded bass, with smooth high frequencies that extend beyond 20k Hz. Match these to a low-impedance amplifier & be amazed how big they sound! ...

The days of passing around a cable to share content on a big screen in a meeting are gone. The " Techconnect Select" is an HDMI dongle which fits to an HDMI cable, & plugs into your laptop. When a user is ready to share their screen they just press the SELECT button on the dongle. The Techconnect Select sends a control signal back down the HDMI cable to the HDMI switcher which is hidden out of sight. ** Users in Control** Instead of passing a cable or reaching for a control device, users can switch right at their PC
- no training required. ** Up to Four Users** Techconnect Select works with the Techconnect TC2-HDMI41 HDMI switcher (sold separately) which supports up to four dongles. ** Tidy** Attach the HDMI switcher under the table (it comes with mounting ears), feed the cables up through a Techconnect Tilt table-mounted faceplate, & all the users see is the HDMI cables. ** Any Cable** The HDMI cable

Specification has spare wires for control signals, so any HDMI cable works. The Select uses these wires to get the control signal back to the switcher. TC2-SELECT top Any Presentation Device Works for any device with HDMI output including iPads (lightning to HDMI adaptor required). ** Confidence** A power light tells the user they are connected & ready to go, & a link light shows if you're the active user. ** Retrofit** If users have a Techconnect HDMI switcher & want to add the Techconnect Select functionality they can. (Note: Vision switchers with audio output via coaxial & toslink do not support Techconnect Select) ** Buy in Package or Individually** Let Vision take the confusion out of ordering; buy a package which has all the parts you need as shown in the application images on this page. See package contents table at bottom of this page. ** Specifications** PRODUCT DIMENSIONS: 49 x 21.5x 10.5 mm (length x width x height) PACKAGED DIMENSIONS: 58 x 32 x 15 mm PRODUCT WEIGHT: 13.5 g PACKAGED WEIGHT:


...

The days of passing around a cable to share content on a big screen in a meeting are gone. The " Techconnect Select" is an HDMI dongle which fits to an HDMI cable, & plugs into your laptop. When a user is ready to share their screen they just press the SELECT button on the dongle. The Techconnect Select sends a control signal back down the HDMI cable to the HDMI switcher which is hidden out of sight. ** Users in Control** Instead of passing a cable or reaching for a control device, users can switch right at their PC
- no training required. ** Up to Four Users** Techconnect Select works with the Techconnect TC2-HDMI41 HDMI switcher (sold separately) which supports up to four dongles. ** Tidy** Attach the HDMI switcher under the table (it comes with mounting ears), feed the cables up through a Techconnect Tilt table-mounted faceplate, & all the users see is the HDMI cables. ** Any Cable** The HDMI cable

Specification has spare wires for control signals, so any HDMI cable works. The Select uses these wires to get the control signal back to the switcher. TC2-SELECT top Any Presentation Device Works for any device with HDMI output including iPads (lightning to HDMI adaptor required). ** Confidence** A power light tells the user they are connected & ready to go, & a link light shows if you're the active user. ** Retrofit** If users have a Techconnect HDMI switcher & want to add the Techconnect Select functionality they can. (Note: Vision switchers with audio output via coaxial & toslink do not support Techconnect Select) ** Buy in Package or Individually** Let Vision take the confusion out of ordering; buy a package which has all the parts you need as shown in the application images on this page. See package contents table at bottom of this page. ** Specifications** PRODUCT DIMENSIONS: 49 x 21.5x 10.5 mm (length x width x height) PACKAGED DIMENSIONS: 58 x 32 x 15 mm PRODUCT WEIGHT: 13.5 g PACKAGED WEIGHT:


...

A major cost component of cables is copper, so cheap cables have less copper & a thick outer cable jacket to fool the buyer into thinking they are getting something they are not. Compromising can result in cables which don't support high quality Audio & results in flagging & ingress of noise interference. The cross-sectional area of Tecconnect cable conductors allows sufficient current-carrying capacity to support high quality transmission of audio signals, & the shielding is evenly wound. One end or the TC2-10M2PHO cable is pre-terminated with a phoenix captive screw connector ready to plug into back of a Techconnect V2 module & 2 RCA (Phonon) molded plugs on the other end that can be simply plugged into your TV, DVD Player, Amplifier or other compatible device. Techconnect cables give you the speed of a pre-terminated system with the flexibility you sometimes need so just in case you need to shorten a cable or to pull a cable through a small hole or cavity? Or if you need more than 7 meter but less than 10 m & no where to hide the excess cable just unscrew & remove the phoenix connector, cut the cable to length, prepare the wire ends for re-termination to the Phoenix screw connector. ...

A major cost component of cables is copper, so cheap cables have less copper & a thick outer cable jacket to fool the buyer into thinking they are getting something they are not. Compromising can result in cables which dont support high resolutions & results in flagging, image jitter & or Ghosting. The cross-sectional area of Techconnect cable conductors allows sufficient current-carrying capacity to support high resolution signal, & the shielding is evenly wound. Techconnect cables give you the speed of a pre-terminated system with the flexibility you sometimes need. One end or the TC2-15M1PHO cable is pre-terminated with a phoenix captive screw connector ready to plug into back of Techconnect V2 module & a molded yellow RCA video plug on the other end. Need to shorten a cable or to pull a cable through a small hole or cavity? If you need more than 10 meter but less than 15 m & no where to hide the excess cable just unscrew & remove the phoenix connector, cut the cable to length, prepare the wire ends for re-termination to the Phoenix screw connector. ...

A major cost component of cables is copper, so cheap cables have less copper & a thick outer cable jacket to fool the buyer into thinking they are getting something they are not. Compromising can result in cables which don't support high resolutions & results in flagging, image jitter & or Ghosting. The cross-sectional area of Techconnect cable conductors allows sufficient current-carrying capacity to support high resolution signal, & the shielding is evenly wound. Techconnect cables give you the speed of a pre-terminated system with the flexibility you sometimes need. One end or the TC2-15M1PHO cable is pre-terminated with a phoenix captive screw connector ready to plug into back of Techconnect V2 module & a molded yellow RCA video plug on the other end. Need to shorten a cable or to pull a cable through a small hole or cavity? If you need more than 10 meter but less than 15 m & no where to hide the excess cable just unscrew & remove the phoenix connector, cut the cable to length, prepare the wire ends for re-termination to the Phoenix screw connector. ...

Designed for demanding professional use, the Techconnect HDMI distribution amplifier has a 2.25 Gpbs bandwidth to manage the highest definition HDMI signals. Potential applications include digital signage in retail, corporate, & event venues; anywhere where displays are used. ...

Designed for demanding professional use, the Techconnect HDMI distribution amplifier has a 2.25 Gpbs bandwidth to manage the highest definition HDMI signals. Potential applications include digital signage in retail, corporate, & event venues; anywhere where displays are used. ...

Vision Techconnect TC2-table mounted sloping back box with aluminum trim for mounting of Vision TC2 Frames that can be populated with up to 5 interchangeable modules for connectivity of audio-visual installations & equipment. When a projector is installed on the ceiling or wall you need a way of plugging your laptop or other source equipment into it without having to clamber up on the table or running trailing leads from a side wall. The Vision Techconnect sloping Table mount Back Box & Vision Techconnect TC2 modular faceplate system makes this simple allowing you to make the input easily access. Techconnect aluminum sloping backbox can be mounted on to most flat surfaces including a table, for easy access to different AV inputs; each double gang frame will hold up to 5 singular width modules. ...