The DES-3200 series is a member of D-Link's Layer 2 x Stack Managed Switch family designed for the Metro ETTX & FTTX market. The DES-3200 series provides 16 100 Mbps Fast Ethernet connections plus 2 combo Gigabit/SFP ports. The DES-3200-18 comes with a 9-inch desktop size & fanless feature which is suitable for ETTH deployment. ...

The DES-3200 Series is a member of D-Link's Layer 2 managed switch family designed for the ETTX, FTTX, & enterprise markets. The DES-3200 Series provides 8/16/24, or 48 10/100 Mbps Fast Ethernet connections & various SFP or combo Gigabit/SFP ports uplink, as well as Po E options. ...

The x Stack DES-3528 Ethernet switch is part of D-Links DES-3528/3552 series switches that inherit most of the features from the current DES-3526/50 switches with additional functions such as, notably enhanced switching capacity, physical stacking, Layer 2+ functions including static routing, multicast support & enhanced security, making it an ideal access layer solution for enterprise & campus networks. This switch can seamlessly integrate with L3 core switches to form a part of multi-level network structure of high-speed backbone & centralized servers. ...

The x Stack DES-3528 Ethernet switch is part of D-Link's DES-3528/3552 series switches that inherit most of the features from the current DES-3526/50 switches with additional functions such as, notably enhanced switching capacity, physical stacking, Layer 2+ functions including static routing, multicast support & enhanced security, making it an ideal access layer solution for enterprise & campus networks. This switch can seamlessly integrate with L3 core switches to form a part of multi-level network structure of high-speed backbone & centralized servers. ...

The x Stack DES-3552 by D-Link is a high-performance, managed, stackable 28-port Layer 2 Fast Ethernet switch including 2 Gigabit Ethernet & 2 Combo 1000BASET-T/SFP ports that provides an ideal solution for workgroups & edge deployments of a network. The D-Link Single IP Management (SIM) allows administrators to cluster up a virtual stack of up to 32 dispersed switches with fewer distance limitations through a single IP address. ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...