About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

D-Link xStack 24-port 10/100/1000 Layer 2+ Stackable Managed PoE Gi
D-Link XStack
24-port 10/100/1000
Layer 2+
Stackable Managed Po E
Gi
£1420.60
The x Stack DGS-3420 series of next generation Layer 2+ Gigabit switches delivers performance, flexibility, security, multi-layer Qo S, & accessibility, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP, 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or aggregation switches to form a multilevel network structured with backbone & centralized high-speed servers. ...
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed Gigabit Switch
D-Link XStack
24-port 10/100/1000
Layer 3
Managed Gigabit Switch
£1738.82
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed Gigabit Switch
D-Link XStack
24-port 10/100/1000
Layer 3
Managed Gigabit Switch
£2479.42
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed Gigabit Switch
D-Link XStack
24-port 10/100/1000
Layer 3
Managed Gigabit Switch
£1411.09
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed Gigabit Switch
D-Link XStack
24-port 10/100/1000
Layer 3
Managed Gigabit Switch
£2482.90
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed PoE Gigabit Switch
D-Link XStack
24-port 10/100/1000
Layer 3 Managed Po E
Gigabit Switch
£3273.70
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed PoE Gigabit Switch
D-Link XStack
24-port 10/100/1000
Layer 3 Managed Po E
Gigabit Switch
£1651.87
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed PoE Gigabit Switch
D-Link XStack
24-port 10/100/1000
Layer 3 Managed Po E
Gigabit Switch
£3278.30
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available
D-Link xStack 24-port SFP Layer 3 Managed Gigabit Switch
D-Link XStack 24-port
SFP Layer 3 Managed
Gigabit Switch
£2224.63
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available
D-Link xStack 24-port SFP Layer 3 Managed Gigabit Switch
D-Link XStack 24-port
SFP Layer 3 Managed
Gigabit Switch
£1909.89
The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...
Available

D-Link XStack 24-port 10/100/1000 Layer 3 Managed PoE Gigabit Switch

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer QoS and access control, along with redundant power solutions for SMBs and enterprises. With high Gigabit port densities, Gigabit SFP and 10-Gigabit SFP+ support, and advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone and centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) and the Enhanced Image (EI). The
Standard Image provides fundamental features for campuses and enterprises such as switching, routing, multicasting, advanced Quality of Service (QoS), and robust security features. The Enhanced Image supports OAM, BGP, IPv6 dynamic routing and tunneling, which are all suitable for the service provider network. Easily deployed and simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone and centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, and the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant
ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth and high port densities on the already cost
Buy
Availability: In Stock
£2550.26
hubs & switches Routers & Switches/Switches
Description Reviews / Comments Add New

Product Description

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost

Reviews/Comments

Add New

Intelligent Comparison

Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed PoE Gigabit Switch
D-Link XStack 24-port 10/100/1000 Layer 3 Managed PoE Gigabit Switch BT Business Direct
£3273.70
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed Gigabit Switch
D-Link XStack 24-port 10/100/1000 Layer 3 Managed Gigabit Switch BT Business Direct
£1738.82
Available
D-Link xStack 24-port 10/100/1000 Layer 3 Managed Gigabit Switch
D-Link XStack 24-port 10/100/1000 Layer 3 Managed Gigabit Switch BT Business Direct
£2479.42
Available
D-Link xStack 24-port SFP Layer 3 Managed Gigabit Switch
D-Link XStack 24-port SFP Layer 3 Managed Gigabit Switch BT Business Direct
£2224.63
Available
D-Link xStack 24-port 10/100 Layer 2+ Managed Switch
D-Link XStack 24-port 10/100 Layer 2+ Managed Switch BT Business Direct
£258.00
Available
D-Link xStack 24-port 10/100 Layer 2+ Managed Switch
D-Link XStack 24-port 10/100 Layer 2+ Managed Switch BT Business Direct
£279.07
Available
D-Link 24-port 10/100/1000 Layer 2 Stackable Managed Gigabit Switch
D-Link 24-port 10/100/1000 Layer 2 Stackable Managed Gigabit Switch BT Business Direct
£373.93
Available
D-Link 24-port 10/100/1000 Layer 2 Stackable Managed Gigabit Switch
D-Link 24-port 10/100/1000 Layer 2 Stackable Managed Gigabit Switch BT Business Direct
£342.24

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

hot - An indication of the temperature being high and a sensation of heat to the tough
deliver - The method by which something is delivered fomr one location to another
Cable - A series of wires bonded to form a single thread
Physical - Used to describe strength or visual properties of an item
speed - A measurement of how fast an object travels between two points
robust - An physical or metaphorical object which is well built or hard to destroy
Quality - An object that has quality is superior in function and finish than a less quality object.
Network - A link and communication between things. Often computers or people.
Simple - Basic, easy no difficulty in understanding.
Layer - Adding extra quantities of materials for extra practical benefits, e.g. warmth.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.

Supplier Information

BT Business Direct
Page Updated: 2022-10-13 15:56:15

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu