D-Link's DSR-1000N Unified Services Router is a secure, high performance networking solution to address the growing needs of small & medium businesses. Integrating high-speed Wireless N & mobile 3G support, the DSR-1000N offers comparable performance to traditional wired networks but with fewer limitations. Optimal network security is provided via features such as virtual private network (VPN) tunnels, IP Security (IPSec), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP), & Secure Sockets Layer (SSL), making it ideal for SMB & branch offices that need a secure, reliable connection to remote resources. The DSR-1000N

Includes:: dual-WAN Gigabit Ethernet which provides policy-based service management, ensuring maximum productivity for your business operations. The failover feature maintains data traffic without disconnecting when a landline connection is lost. The Outbound Load Balancing feature adjusts outgoing traffic across two WAN interfaces & optimizes the system performance resulting in high availability. The second WAN port can be configured as a DMZ port allowing you to run isolated servers on your LAN. Designed to deliver superior wireless performance, the DSR-1000N

Includes:: Wireless N on either the 2.4 GHz or 5 GHz radio bands. Multiple In Multiple Out (MIMO) technology allows DSR-1000N to provide high data rates with minimal "dead spots" throughout the wireless coverage area. The DSR-1000N supports 3G mobile connectivity via its USB (Universal Serial Bus) ports. This capability offers an additional secure data connection for networks that provide critical services. The DSR-1000N can be configured to automatically switch to a 3G network whenever a physical link is lost. A fully featured virtual private network (VPN) provides your mobile workers & branch offices with a secure link to your resources. Site-to-site VPN tunnels use IP Security (IPSec) Protocol, Point-to-Point Tunneling Protocol (PPTP), or Layer 2 Tunneling Protocol (L2TP)



...

The DES-3200 series is a member of D-Link's Layer 2 x Stack Managed Switch family designed for the Metro ETTX & FTTX market. The DES-3200 series provides 16 100 Mbps Fast Ethernet connections plus 2 combo Gigabit/SFP ports. The DES-3200-18 comes with a 9-inch desktop size & fanless feature which is suitable for ETTH deployment. ...

The DES-3200 Series is a member of D-Link's Layer 2 managed switch family designed for the ETTX, FTTX, & enterprise markets. The DES-3200 Series provides 8/16/24, or 48 10/100 Mbps Fast Ethernet connections & various SFP or combo Gigabit/SFP ports uplink, as well as Po E options. ...

The x Stack DES-3528 Ethernet switch is part of D-Links DES-3528/3552 series switches that inherit most of the features from the current DES-3526/50 switches with additional functions such as, notably enhanced switching capacity, physical stacking, Layer 2+ functions including static routing, multicast support & enhanced security, making it an ideal access layer solution for enterprise & campus networks. This switch can seamlessly integrate with L3 core switches to form a part of multi-level network structure of high-speed backbone & centralized servers. ...

The x Stack DES-3528 Ethernet switch is part of D-Link's DES-3528/3552 series switches that inherit most of the features from the current DES-3526/50 switches with additional functions such as, notably enhanced switching capacity, physical stacking, Layer 2+ functions including static routing, multicast support & enhanced security, making it an ideal access layer solution for enterprise & campus networks. This switch can seamlessly integrate with L3 core switches to form a part of multi-level network structure of high-speed backbone & centralized servers. ...

The x Stack DGS-3420 series of next generation Layer 2+ Gigabit switches delivers performance, flexibility, security, multi-layer Qo S, & accessibility, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP, 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or aggregation switches to form a multilevel network structured with backbone & centralized high-speed servers. ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscribers sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Links Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...

The DGS-3620 Series of next generation Layer 3 Gigabit switches deliver performance, flexibility, security, multi-layer Qo S & access control, along with redundant power solutions for SMBs & enterprises. With high Gigabit port densities, Gigabit SFP & 10-Gigabit SFP+ support, & advanced software solutions, these switches can act as either departmental access layer devices or core switches to form a multilevel network structured with backbone & centralized high-speed servers. Service providers can take advantage of the high SFP density switches to structure the cores of Fibre to the Building (FTTB) networks that they extend to the subscriber's sites. The DGS-3620 Series is embedded with two different software images, the Standard Image (SI) & the Enhanced Image (EI). The Standard Image provides fundamental features for campuses & enterprises such as switching, routing, multicasting, advanced Quality of Service (Qo S), & robust security features. The Enhanced Image supports OAM, BGP, IPv 6 dynamic routing & tunneling, which are all suitable for the service provider network. Easily deployed & simple to manage, the DGS-3620 can be virtually stacked with any switch that supports D-Link's Single IP Management (SIM) to form a multi-level network structured with backbone & centralized high-speed servers. The virtual stack can include units located anywhere on the same network domain, eliminating cable distance barriers, limitations of physical stacking, & the need for stack cabling. Alternatively, depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. Switches in the stack are hot-swappable to minimize network downtime in case a replacement is required, eliminating single points of failure. Up to 12 units or 576 Gigabit ports can be configured for a stack using direct attached cables allowing high bandwidth & high port densities on the already cost ...