Dock your 2.5" or 3.5" SATA SSDs/HDDs & add USB (Universal Serial Bus) Fast Charge Capacity in a stylish white docking station. The SDOCKU33HW USB (Universal Serial Bus) 3.0 Dock with Fast Charge USB (Universal Serial Bus) hub lets you easily connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 3-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 3 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) host connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, the dock features configurable power management, which reduces energy consumption & helps extend the life of your drives by avoiding unnecessary access. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. With uniform white design & sleek silver trim, the SDOCKU33HW will look great with your Apple Mac. ...

Ultra portable & superspeed capability for faster access & downloads from laptop. The SAT2510BU3 USB (Universal Serial Bus) 3.0 External Hard Drive Enclosure lets you connect a 2.5in (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) through USB (Universal Serial Bus) 3.0
- a cutting edge external storage solution that lets you harness the speed & performance supported by the Super Speed USB (Universal Serial Bus) interface. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that dont support the newest USB (Universal Serial Bus) standard (at speeds of 480 Mbps & 12 Mbps, respectively). Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computers storage/backup capabilities. The hard drive enclosure features a compact, aluminum & plastic design that delivers a durable, ultra portable external storage solution. This versatile external storage solution is compatible with a broad range of Windows operating systems, as well as Linux & Mac OS X & up.

...

Turn a 2.5in SATA HDD/SSD into an external USB (Universal Serial Bus) 3.0 drive while also an additional or replacement removable enclosure for the SAT2510U3REM. The SAT2510U3S 2.5in Hard Disk Drive Enclosure for SAT2510U3REM is a spare SATA drive enclosure for use with the SAT2510U3REM Removable Hard Drive Backup System/ Mobile Rack, which simplifies removing/rotating drives, & is also backward compatible with the USB (Universal Serial Bus) 2.0 model, SAT2510U2REM. This 2.5" SATA enclosure allows for native SATA connectivity (SATA 6 Gbps compliant) while mounted inside the SAT2510U3REM backup system, but also provides Super Speed USB (Universal Serial Bus) 3.0 connectivity (with up to 5 Gbps of data bandwidth) when used externally. ...

Backup & Transfer Data at Super Speed USB (Universal Serial Bus) 3.0 speeds. The SAT3510BU3 USB (Universal Serial Bus) 3.0 External Hard Drive Enclosure lets you connect a 3.5in SATA hard drive through USB (Universal Serial Bus) 3.0
- a cutting edge external storage solution that lets you harness the speed & performance supported by the Super Speed USB (Universal Serial Bus) interface. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computers storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that dont support the newest USB (Universal Serial Bus) standard, at speeds of 480 Mbps & 12 Mbps (respectively). The drive enclosure features a compact, free-standing design that requires minimal desk space, & is equipped with an 80mm fan that helps keep the installed hard drive cool for peak performance. This versatile external storage solution is compatible with a broad range of Windows operating systems, as well as Linux & Mac OS X & up.

...

Dock your 2.5in or 3.5in SATA III SSDs/HDDs over USB (Universal Serial Bus) 3.0 with UASP. The SDOCKU33BV UASP-enabled USB (Universal Serial Bus) 3.0 docking station makes it easy for you to connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for large capacity SATA I/II/III drives (tested up to 4TB), & 2.5in or 3.5in drives this HDD/SSD docking station is compatible with virtually any SATA drive, & greatly increases the storage/backup capabilities of your computer. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Dock your 2.5" or 3.5" SATA SSDs/HDDs & add USB (Universal Serial Bus) Fast Charge Capacity in a stylish black docking station. The SDOCKU33HB USB (Universal Serial Bus) 3.0 hard drive dock with Fast Charge USB (Universal Serial Bus) hub lets you easily connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 3-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 3 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. Enhanced with UASP, the dock supports up to 70% faster performance than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. ...

Dock your 2.5" or 3.5" SATA SSDs/HDDs & add USB (Universal Serial Bus) Fast Charge Capacity in a stylish black docking station. The SDOCKU33HB USB (Universal Serial Bus) 3.0 hard drive dock with Fast Charge USB (Universal Serial Bus) hub lets you easily connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 3-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 3 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. Enhanced with UASP, the dock supports up to 70% faster performance than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. ...

This USB (Universal Serial Bus) 3.0 memory card reader provides a fast, easy way to access & edit photos & videos on your SD & micro SD cards, wherever you go. Compact & portable, you can use this USB (Universal Serial Bus) memory card reader/writer with a laptop, tablet, smartphone or desktop computer that has a USB (Universal Serial Bus)-C or USB (Universal Serial Bus)-A port. ...

The USB3SPLATE 2-port USB (Universal Serial Bus) 3.0 A slot plate converts the USB (Universal Serial Bus) pins on the USB (Universal Serial Bus) 3.0 motherboard header to 2 standard USB (Universal Serial Bus) 3.0 A-type ports. The plate can be mounted on the rear panel of a computer case, adding two USB (Universal Serial Bus) 3.0 A female ports for simple connection to USB (Universal Serial Bus) peripheral devices. The USB (Universal Serial Bus) 3.0 standard supports transfer rates of up to 5 Gbps, & provides connectivity & support for older USB (Universal Serial Bus) 2.0 (480 Mbps) & 1.1 (12 Mbps) devices. ...

Securely erase a SATA HDD/SSD without a host device, or dock your drive for easy access. Make the most of your SATA drives. This standalone eraser dock lets you erase your 2.5" & 3.5" solid-state drives or hard drives without connecting to a host computer, making it easy to re-use or re-purpose your SATA drive. For added peace of mind, the dock offers a printed confirmation when data has been securely erased. The eraser dock also gives you a single-bay dock for your SATA drive with fast USB (Universal Serial Bus) 3.0 performance, also known as USB (Universal Serial Bus) 3.1 Gen 1 (5 Gbps). Using industry-recognized erase modes, you can rest assured that the standalone eraser securely cleans, erases or sanitizes the data from your 2.5" or 3.5" SSD or HDD. The eraser dock supports nine erase modes including: Quick Erase, Single & Multi-pass Overwrites, Custom Erase, Secure Erase & Enhanced Secure Erase. The Multi-pass Overwrite (3-Pass Full Disk Overwrite) erase procedures meet the requirements of Do D (5220.22-M) standards. The eraser dock lets you connect to a serial printer to print a record of the erase procedure, & confirm that the erase has been successfully completed. This feature is ideal for IT technicians, system administrators or any departments needing confirmation when erasing sensitive or confidential information. For your reference, the printed receipt clearly shows you the time & date of erase, as well as the erase mode used. For IT technicians or business professionals who need to check files or test different hard drives, the dock lets you hot-swap drives in & out as needed. The dock features a single SATA bay with a top-loading design for easy drive access, which makes it easy to quickly back-up or transfer data to a hard drive or solid-state drive. With support for SATA I & II & large capacity drives (tested up to 6TB), this docking station is compatible with virtually any 2.5" & 3.5" SATA SSD or HDD drive. The eraser dock also works with 2.5" & 3.5" IDE ha ...