Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish white docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFW USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 2 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish white docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFW USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 2 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy ...

Record DVI video to your computer, & embed a 3.5mm audio source, at 1080p 60fps resolution. This capture device turns your USB (Universal Serial Bus) 3.0 computer into a digital video recorder for high-quality DVI video, leveraging USB (Universal Serial Bus) 3.0 transfer speed to capture raw 1080p video at 60 frames per second. The capture device records video from your DVI source device & also

Includes:: a 3.5 mm audio input jack that lets you record the video's accompanying analog audio output, or add your own independent audio source for voice over commentary. Record lossless video at 60 FPS, ensuring every frame of content is saved, unlike 30-frame-per-second capture devices that only catch half the action. 1080p 60 exactly matches the output of most computer video cards, which is great for recording the output from your PC, server, or POS station, when creating software training & tutorial videos. With support for 1080p video, you can ensure crystal-clear capture quality at high-definition resolution, & create high-quality video to distribute internally throughout your business or distribution over the internet. This USB (Universal Serial Bus) capture card is capable of capturing lossless raw video, making it compatible with Microsoft Direct Show. With raw video capture, you can record video using your preferred third-party Direct Show software such as Open Broadcaster Software (OBS). The software that's included with the capture card encodes in H.264
- the most widely adopted video codec in the world. H.264 encoding capability ensures the video files you save will be compatible with almost any video player, such as the media software on your PC, Mac, i OS or Android devices, with no editing or converting needed. H.264 is also widely supported by most software titles, including Adobe Premiere & Windows Media Encoder.


...

The S3520BU33ER 2-Bay RAID enclosure offers a high-performance external storage solution, enabling you to build a secure RAID array with two 3.5" SATA hard drives, with the option to connect it to your computer through either an available USB (Universal Serial Bus) 3.0 or e SATA port. For fast data transfers & efficient performance from your SATA III drives, the RAID enclosure supports full SATA III transfer speeds, as well as full USB (Universal Serial Bus) 3.0 transfer speeds. When connected through USB (Universal Serial Bus), the enclosure supports UASP, which offers performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. With support for JBOD, Spanning, RAID 0, & RAID 1, the enclosure offers several options that enable you to customize your drive arrangement based on your storage requirements. To maximize both durability & reliability, the external RAID enclosure features high-quality aluminum construction with a built-in fan that helps improve ventilation & maintain a better operating environment for your drives. ...

The S3520BU33ER 2-Bay RAID enclosure offers a high-performance external storage solution, enabling you to build a secure RAID array with two 3.5" SATA hard drives, with the option to connect it to your computer through either an available USB (Universal Serial Bus) 3.0 or e SATA port. For fast data transfers & efficient performance from your SATA III drives, the RAID enclosure supports full SATA III transfer speeds, as well as full USB (Universal Serial Bus) 3.0 transfer speeds. When connected through USB (Universal Serial Bus), the enclosure supports UASP, which offers performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. With support for JBOD, Spanning, RAID 0, & RAID 1, the enclosure offers several options that enable you to customize your drive arrangement based on your storage requirements. To maximize both durability & reliability, the external RAID enclosure features high-quality aluminum construction with a built-in fan that helps improve ventilation & maintain a better operating environment for your drives. ...

Easily connect & hot swap 3.5in SATA III hard drives, through either e SATA or UASP-supported USB (Universal Serial Bus) 3.0. The S3510BMU33ET Removable Hard Drive Enclosure lets you connect a 3.5" SATA hard drive through an available USB (Universal Serial Bus) 3.0 or e SATA port, with a tray-less design that makes hot-swapping easy. For fast performance & efficient data transfers, when connected through e SATA, the enclosure supports full SATA III transfer speeds
- up to 6 Gbps. For universal compatibility, the enclosure can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which supports performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See the UASP testing results below for further details. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for hard drives at capacities of up to 4TB, & the ability to easily hot-swap between drives. Plus, to maximize both durability & reliability, the enclosure features high-quality aluminum construction. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive.
...

Easily connect & hot swap 3.5in SATA III hard drives, through either e SATA or UASP-supported USB (Universal Serial Bus) 3.0. The S3510BMU33ET Removable Hard Drive Enclosure lets you connect a 3.5" SATA hard drive through an available USB (Universal Serial Bus) 3.0 or e SATA port, with a tray-less design that makes hot-swapping easy. For fast performance & efficient data transfers, when connected through e SATA, the enclosure supports full SATA III transfer speeds
- up to 6 Gbps. For universal compatibility, the enclosure can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which supports performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See the UASP testing results below for further details. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for hard drives at capacities of up to 4TB, & the ability to easily hot-swap between drives. Plus, to maximize both durability & reliability, the enclosure features high-quality aluminum construction. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive.
...

Add a compact external memory card reader to any computer with a USB (Universal Serial Bus) 3.0 port. The FCREADMICRO3 USB (Universal Serial Bus) 3.0 Multi-media Card Reader offers quick access to the most popular flash card formats, from any computer with a USB (Universal Serial Bus) port (optimal performance with 3.0, backward compatible with USB (Universal Serial Bus) 2.0). Suitable for quickly accessing memory cards of virtually any portable media device (e.g. digital cameras, MP3 players, etc.), this versatile media card reader supports the most popular card types, including: Secure Digital (SD), Multi-Media Card (MMC), Mini-SD, Micro-SD/SDHC (T-flash), SDHC, SDXC, RS-MMC, Mobile-MMC & MMC-micro, Memory Stick (MS), Memory Stick PRO (MS-PRO), MS Duo, MS-PRO Duo, Memory Stick XC, Micro-MS (M2), MSPRO-HG Duo 8-bit mode. An ideal Laptop or Desktop accessory, this pocket-sized memory card reader is lightweight, portable. ...

Add a compact external memory card reader to any computer with a USB (Universal Serial Bus) 3.0 port. The FCREADMICRO3 USB (Universal Serial Bus) 3.0 Multi-media Card Reader offers quick access to the most popular flash card formats, from any computer with a USB (Universal Serial Bus) port (optimal performance with 3.0, backward compatible with USB (Universal Serial Bus) 2.0). Suitable for quickly accessing memory cards of virtually any portable media device (e.g. digital cameras, MP3 players, etc.), this versatile media card reader supports the most popular card types, including: Secure Digital (SD), Multi-Media Card (MMC), Mini-SD, Micro-SD/SDHC (T-flash), SDHC, SDXC, RS-MMC, Mobile-MMC & MMC-micro, Memory Stick (MS), Memory Stick PRO (MS-PRO), MS Duo, MS-PRO Duo, Memory Stick XC, Micro-MS (M2), MSPRO-HG Duo 8-bit mode. An ideal Laptop or Desktop accessory, this pocket-sized memory card reader is lightweight, portable. ...

The 35BAYUSB3S4 3.5-inch Front Bay to 4-Port USB (Universal Serial Bus) 3.0 Panel Hub turns any available 3.5-inch computer case front bay into a 4-Port USB (Universal Serial Bus) 3.0 hub. Using only a single USB (Universal Serial Bus) connection, this front panel hub adds four easily accessible USB (Universal Serial Bus) ports to the front of your computer case through a 3.5-inch bay, or through a 5.25-inch bay using the optional Front Bay Bracket Adapter (BRACKETFDBK) accessory. Each of the added ports is compliant with the USB (Universal Serial Bus) 3.0 standard which supports up to 5 Gbps of bandwidth (10x faster than the USB (Universal Serial Bus) 2.0 standard) & up to 900m A of power. Accessorize with the PEXUSB3S11 PCI Express card to provide an internal USB (Universal Serial Bus) 3.0 port, so as to keep the external ports free for external devices. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage Connect up to four USB (Universal Serial Bus) 3.0/2.0/1.x devices simultaneously, through your computers front 3.5" bay Super Speed USB (Universal Serial Bus) 3.0 supports up to 5 Gbps of bandwidth & up to 900m A of power per port to support faster & more powerful devices Backed by a Star Tech.com 2-year warranty & free lifetime technical support Features Four front accessible USB (Universal Serial Bus) type-A ports Fits into any 3.5" computer case front bay Super Speed USB (Universal Serial Bus) 3.0 compliant, supporting data transfer rates up to 5 Gbps Backward compatible with USB (Universal Serial Bus) 2.0 & USB (Universal Serial Bus) 1.0/1.1 specifications & devices Provides up to 900m A of power per port USB (Universal Serial Bus) Link LED indicator for each port Applications Expand your system's USB (Universal Serial Bus) 3.0 capabilities with additional ports for connecting high speed external storage devices Add easier to access USB (Universal Serial Bus) ports to the front of a computer system instead of the rear Make use of an internal USB (Universal Serial Bus) port & unused 3.5" front bay to increase the system's expandability ...