Add two Gigabit Ethernet ports & a USB (Universal Serial Bus) 3.0 pass-through port to your laptop through a single USB (Universal Serial Bus) 3.0 port. The USB32000SPT USB (Universal Serial Bus) 3.0 to Dual Port Gigabit Ethernet Adapter lets you add two Gigabit Ethernet ports to your laptop or Ultrabook computer through a single USB (Universal Serial Bus) 3.0 port, & features an integrated USB (Universal Serial Bus) 3.0 pass-through port that keeps your USB (Universal Serial Bus) port available for use with external storage or other peripherals. Each RJ45 port supports 10/100/1000 Mbps Ethernet & is fully compatible with IEEE 802.3i/u/ab standards. This 2-port USB (Universal Serial Bus) LAN adapter is a versatile solution for connecting to two separate physical networks simultaneously, leveraging the 5 Gbps speed of USB (Universal Serial Bus) 3.0 to provide dedicated gigabit bandwidth to each port. The dual USB (Universal Serial Bus) NIC is also ideal for providing dedicated physical network interfaces to virtual machine configurations. Great for IT administrators that require dual-homed or multi-homed host systems. The USB (Universal Serial Bus) 3.0 NIC supports IPv 4/IPv 6 packet Checksum Offload Engine (COE) & TCP large send offload to reduce the load on your CPU, as well as Jumbo Frames, full-duplex operation with 802.3x flow control, & VLAN tagging for an efficient & full-featured USB (Universal Serial Bus) network adapter. ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish black docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFB USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the each other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad's & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing eas ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish black docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFB USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the each other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad's & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing eas ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish white docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFW USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 2 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish white docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFW USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 2 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy ...

The S3520BU33ER 2-Bay RAID enclosure offers a high-performance external storage solution, enabling you to build a secure RAID array with two 3.5" SATA hard drives, with the option to connect it to your computer through either an available USB (Universal Serial Bus) 3.0 or e SATA port. For fast data transfers & efficient performance from your SATA III drives, the RAID enclosure supports full SATA III transfer speeds, as well as full USB (Universal Serial Bus) 3.0 transfer speeds. When connected through USB (Universal Serial Bus), the enclosure supports UASP, which offers performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. With support for JBOD, Spanning, RAID 0, & RAID 1, the enclosure offers several options that enable you to customize your drive arrangement based on your storage requirements. To maximize both durability & reliability, the external RAID enclosure features high-quality aluminum construction with a built-in fan that helps improve ventilation & maintain a better operating environment for your drives. ...

The S3520BU33ER 2-Bay RAID enclosure offers a high-performance external storage solution, enabling you to build a secure RAID array with two 3.5" SATA hard drives, with the option to connect it to your computer through either an available USB (Universal Serial Bus) 3.0 or e SATA port. For fast data transfers & efficient performance from your SATA III drives, the RAID enclosure supports full SATA III transfer speeds, as well as full USB (Universal Serial Bus) 3.0 transfer speeds. When connected through USB (Universal Serial Bus), the enclosure supports UASP, which offers performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. With support for JBOD, Spanning, RAID 0, & RAID 1, the enclosure offers several options that enable you to customize your drive arrangement based on your storage requirements. To maximize both durability & reliability, the external RAID enclosure features high-quality aluminum construction with a built-in fan that helps improve ventilation & maintain a better operating environment for your drives. ...

Dock your 2.5in or 3.5in SATA Hard Drive over USB (Universal Serial Bus) 3.0 or e SATA, with the added benefit of a built-in Cooling Fan. The SATDOCKU3SEF Hard Drive Docking Station (e SATA/USB 3.0 to SATA) delivers quick & easy access to a 2.5in or 3.5in SATA hard disk drive (HDD) or solid state drive (SSD) through either e SATA or USB (Universal Serial Bus) connectivity, making it compatible with almost any system. Large capacity drives (tested with up to 4TB 3.5" & 1TB 2.5" drives) can be used to greatly enhance your computer''s storage/backup capabilities. The docking station features a built-in 80mm cooling fan that provides increased reliability & lifespan to HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. The HDD dock will also power down SATA drives after a period of inactivity (USB mode only) or when the PC is turned off, to help reduce power consumption & noise when not being accessed. The docking station supports full e SATA data transfer rates of up to 3 Gbps, & USB (Universal Serial Bus) 3.0 transfer rates up to 5 Gbps while backward compatible with USB (Universal Serial Bus) 2.0 system transfer rates of up to 480 Mbps. For an even more versatile storage solution, this e SATA/USB 3.0 HDD docking station can be used with the SATA to IDE hard drive adapter (SAT2IDEADP) enabling you to use 2.5in or 3.5in IDE hard drives with the dock. ...

Easily connect & hot swap 3.5in SATA III hard drives, through either e SATA or UASP-supported USB (Universal Serial Bus) 3.0. The S3510BMU33ET Removable Hard Drive Enclosure lets you connect a 3.5" SATA hard drive through an available USB (Universal Serial Bus) 3.0 or e SATA port, with a tray-less design that makes hot-swapping easy. For fast performance & efficient data transfers, when connected through e SATA, the enclosure supports full SATA III transfer speeds
- up to 6 Gbps. For universal compatibility, the enclosure can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which supports performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See the UASP testing results below for further details. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for hard drives at capacities of up to 4TB, & the ability to easily hot-swap between drives. Plus, to maximize both durability & reliability, the enclosure features high-quality aluminum construction. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive.
...

Easily connect & hot swap 3.5in SATA III hard drives, through either e SATA or UASP-supported USB (Universal Serial Bus) 3.0. The S3510BMU33ET Removable Hard Drive Enclosure lets you connect a 3.5" SATA hard drive through an available USB (Universal Serial Bus) 3.0 or e SATA port, with a tray-less design that makes hot-swapping easy. For fast performance & efficient data transfers, when connected through e SATA, the enclosure supports full SATA III transfer speeds
- up to 6 Gbps. For universal compatibility, the enclosure can be connected through USB (Universal Serial Bus) 3.0 with transfer speeds up 5 Gbps plus support for UASP, which supports performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. See the UASP testing results below for further details. The HDD enclosure offers a versatile solution for increasing the storage/backup capabilities of your computer, with support for hard drives at capacities of up to 4TB, & the ability to easily hot-swap between drives. Plus, to maximize both durability & reliability, the enclosure features high-quality aluminum construction. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP enabled Star Tech.com Enclosure, & a SATA III solid state drive.
...