Connect two 3.5" SATA III hard drives to your computer through USB (Universal Serial Bus) 3.0 with UASP in a RAID array, & charge or connect USB (Universal Serial Bus) devices with the built-in 2-port USB (Universal Serial Bus) 3.0 fast charge hub. The S352BU33HR 2-Bay RAID Enclosure lets you build an external RAID array using two 3.5" SATA hard drives, & add it to your computer through USB (Universal Serial Bus) 3.0. For optimal performance from your SATA III drives, the external RAID enclosure supports a UASP-enabled USB (Universal Serial Bus) 3.0 host connection, which performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP compatible host controller. The RAID enclosure also lets you connect additional USB (Universal Serial Bus) 3.0 devices to your computer, through an integrated 2-port USB (Universal Serial Bus) 3.0 hub conveniently mounted on the front of the enclosure. The easy-to-reach hub also has fast charging capabilities, so you can charge your iPad, smartphone or other mobile devices as quickly as you would through a direct wall outlet connection. To help maintain safe operating temperatures for your hard drives, the 2-drive enclosure features a built-in cooling fan to ensure proper air circulation & prevent your SATA drives from over-heating. The enclosure features an integrated hardware RAID controller, which gives you the options you need to set up the array that best suits your storage application, including JBOD, Spanning, RAID 0, & RAID 1. To ensure compatibility with your computer system, the S352BU33HR supports all of the leading operating systems. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. ...

Connect two 3.5" SATA III hard drives to your computer through USB (Universal Serial Bus) 3.0 with UASP in a RAID array, & charge or connect USB (Universal Serial Bus) devices with the built-in 2-port USB (Universal Serial Bus) 3.0 fast charge hub. The S352BU33HR 2-Bay RAID Enclosure lets you build an external RAID array using two 3.5" SATA hard drives, & add it to your computer through USB (Universal Serial Bus) 3.0. For optimal performance from your SATA III drives, the external RAID enclosure supports a UASP-enabled USB (Universal Serial Bus) 3.0 host connection, which performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP compatible host controller. The RAID enclosure also lets you connect additional USB (Universal Serial Bus) 3.0 devices to your computer, through an integrated 2-port USB (Universal Serial Bus) 3.0 hub conveniently mounted on the front of the enclosure. The easy-to-reach hub also has fast charging capabilities, so you can charge your iPad, smartphone or other mobile devices as quickly as you would through a direct wall outlet connection. To help maintain safe operating temperatures for your hard drives, the 2-drive enclosure features a built-in cooling fan to ensure proper air circulation & prevent your SATA drives from over-heating. The enclosure features an integrated hardware RAID controller, which gives you the options you need to set up the array that best suits your storage application, including JBOD, Spanning, RAID 0, & RAID 1. To ensure compatibility with your computer system, the S352BU33HR supports all of the leading operating systems. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish black docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFB USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the each other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing eas ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish white docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFW USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 2 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy ...

Expand your laptop connectivity by adding two displays, with HDMI & DVI or HDMI & VGA, plus six USB (Universal Serial Bus) ports & a Gigabit Ethernet port, all through a single USB (Universal Serial Bus) 3.0 port. This USB (Universal Serial Bus) 3.0 dual-monitor docking station lets you add the ports you need to your laptop, to maximize your workstation performance. The laptop dock provides a cost-effective universal docking solution, with support for HDMI & DVI monitors & plenty of connection options for peripherals. The versatile laptop docking station enables you to improve your efficiency & productivity by expanding the display capabilities of your Windows laptop or Mac Book. Set up dual displays by connecting to one HDMI & one DVI monitor. Plus, the dock

Includes:: a DVI to VGA adapter, so you can connect your legacy VGA monitor in place of a DVI monitor. With the dual-monitor dock, you can connect: 1x HDMI display + 1x DVI display at 2048 x 1152 resolution @ 60 Hz; 1x HDMI display at 2048 x 1152 resolution + 1x VGA display at 1920 x 1200 resolution @ 60 Hz. The USB (Universal Serial Bus) 3.0 docking station offers a fast & easy way to maximize your laptop's workable screen space, giving you three screens in total when coupled with your laptop's display. This USB (Universal Serial Bus) docking station lets you easily connect your keyboard, external drives & other peripherals, to transform your laptop into a powerful, fully capable workstation. The dock features a USB (Universal Serial Bus) Type-B dock connection (host) for more robust port stability, unlike the Micro-B ports that are often used on other docking stations. From the single USB (Universal Serial Bus) 3.0 host connection, the dock provides six USB (Universal Serial Bus) 3.0 (Type-A) ports, a Gigabit Ethernet port, plus a 3.5 mm audio headphone port. Two of the USB (Universal Serial Bus) 3.0 ports are always-on fast-charging ports, adding charge-&-sync flexibility for up to two mobile devices. The compact, horizontal design of the laptop docking station makes it easy to position on your desk, alongside your other devices & peripherals. It's an attractive addition to any w

...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish black docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFB USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the each other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad's & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing eas ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish black docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFB USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the each other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad's & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing eas ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish white docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFW USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 2 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy ...

Dock up to two 2.5" or 3.5" SATA SSDs/HDDs in a stylish white docking station with an integrated 2-port USB (Universal Serial Bus) 3.0 hub. The SDOCK2U33HFW USB (Universal Serial Bus) 3.0 Dual hard drive dock with Fast Charge USB (Universal Serial Bus) hub enables two SATA 2.5in or 3.5in hard drives (HDD) or solid state drives (SSD) to be connected simultaneously to a computer through USB (Universal Serial Bus), while controlling the power status (on/off) of each individual drive independently from the other. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 2-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 2 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPads & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. The docking station features a built-in 80mm cooling fan that helps increase reliability & lifespan of HDDs by keeping the drives cooler. The variable fan speed control allows for on-the-fly adjustments for any type of HDD, or to balance cooling with noise. Extend the value of this docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy ...

Record DVI video to your computer, & embed a 3.5mm audio source, at 1080p 60fps resolution. This capture device turns your USB (Universal Serial Bus) 3.0 computer into a digital video recorder for high-quality DVI video, leveraging USB (Universal Serial Bus) 3.0 transfer speed to capture raw 1080p video at 60 frames per second. The capture device records video from your DVI source device & also

Includes:: a 3.5 mm audio input jack that lets you record the video's accompanying analog audio output, or add your own independent audio source for voice over commentary. Record lossless video at 60 FPS, ensuring every frame of content is saved, unlike 30-frame-per-second capture devices that only catch half the action. 1080p 60 exactly matches the output of most computer video cards, which is great for recording the output from your PC, server, or POS station, when creating software training & tutorial videos. With support for 1080p video, you can ensure crystal-clear capture quality at high-definition resolution, & create high-quality video to distribute internally throughout your business or distribution over the internet. This USB (Universal Serial Bus) capture card is capable of capturing lossless raw video, making it compatible with Microsoft Direct Show. With raw video capture, you can record video using your preferred third-party Direct Show software such as Open Broadcaster Software (OBS). The software that's included with the capture card encodes in H.264
- the most widely adopted video codec in the world. H.264 encoding capability ensures the video files you save will be compatible with almost any video player, such as the media software on your PC, Mac, i OS or Android devices, with no editing or converting needed. H.264 is also widely supported by most software titles, including Adobe Premiere & Windows Media Encoder.


...