Add a Gigabit Ethernet port to your Mac Book, Chromebook or tablet. Gain fast, reliable network access for your Mac Book, Chromebook or tablet, even if it doesn't have an Ethernet port. This USB (Universal Serial Bus) 3.0 to Gigabit network adapter adds a single RJ45 Ethernet port to your computer through your USB (Universal Serial Bus) 3.0 port. It installs instantly
- with no driver required. Engineered with a quality aluminum housing in a silver finish, the network adapter is the perfect companion for your Mac Book, Chromebook or tablet. Compact & portable, this USB (Universal Serial Bus) network adapter is the ideal laptop accessory. You don't have to carry a power adapter with you to use it, because it's powered directly from the host USB (Universal Serial Bus) port. Ideal for office or home use, the USB (Universal Serial Bus) 3.0 network adapter supports full Gigabit bandwidth by harnessing the performance of USB (Universal Serial Bus) 3.0 (5 Gbps). You can quickly access very large files over a Gigabit network, saving valuable time every day. The Realtek chipset gives you the assurance of reliable performance. Get up & running quickly. Simply plug this Ethernet cable adapter into the USB (Universal Serial Bus) port on your laptop & connect to your network. The network adapter chipset provides native driver support, so you don't have to worry about installing additional software.
...

Turn a 3.5" SATA HDD into an external upright UASP-supported Hard Drive with built-in fan. The S3510BMU33B 3.5in SATA hard drive enclosure lets you add external storage to your computer by connecting a 3.5" HDD through an available USB (Universal Serial Bus) 3.0 port. Enhanced with UASP (USB Attached SCSI Protocol), this enclosure lets you get the most out of your SATA III hard drive with performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. The enclosure features aluminum housing with a built-in fan to keep your drive running at an optimal temperature at all times. Plus, to help save valuable work space, the enclosure features an upright design that minimizes its footprint & makes it easy to position near your computer. With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, & can greatly increase the storage/backup capabilities of your computer. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB (Universal Serial Bus) 3.0 for easy access. The SATDOCK2REU3 USB (Universal Serial Bus) 3.0 Standalone Duplicator & Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through Super Speed USB (Universal Serial Bus) 3.0, with the ability to swap drives in & out as needed. The dock also functions as a standalone drive duplicator & eraser
- an efficient & versatile solution for external drive management. Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, & support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing. With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock.
...

Dock your 2.5" or 3.5" SATA SSDs/HDDs & add USB (Universal Serial Bus) Fast Charge Capacity in a stylish white docking station. The SDOCKU33HW USB (Universal Serial Bus) 3.0 Dock with Fast Charge USB (Universal Serial Bus) hub lets you easily connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 3-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 3 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) host connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, the dock features configurable power management, which reduces energy consumption & helps extend the life of your drives by avoiding unnecessary access. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. With uniform white design & sleek silver trim, the SDOCKU33HW will look great with your Apple Mac. ...

Dock your 2.5" or 3.5" SATA SSDs/HDDs & add USB (Universal Serial Bus) Fast Charge Capacity in a stylish white docking station. The SDOCKU33HW USB (Universal Serial Bus) 3.0 Dock with Fast Charge USB (Universal Serial Bus) hub lets you easily connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 3-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 3 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) host connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. With support for UASP, the dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0, when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, the dock features configurable power management, which reduces energy consumption & helps extend the life of your drives by avoiding unnecessary access. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. With uniform white design & sleek silver trim, the SDOCKU33HW will look great with your Apple Mac. ...

Turn a 2.5in SATA HDD/SSD into an external USB (Universal Serial Bus) 3.0 drive while also an additional or replacement removable enclosure for the SAT2510U3REM. The SAT2510U3S 2.5in Hard Disk Drive Enclosure for SAT2510U3REM is a spare SATA drive enclosure for use with the SAT2510U3REM Removable Hard Drive Backup System/ Mobile Rack, which simplifies removing/rotating drives, & is also backward compatible with the USB (Universal Serial Bus) 2.0 model, SAT2510U2REM. This 2.5" SATA enclosure allows for native SATA connectivity (SATA 6 Gbps compliant) while mounted inside the SAT2510U3REM backup system, but also provides Super Speed USB (Universal Serial Bus) 3.0 connectivity (with up to 5 Gbps of data bandwidth) when used externally. ...

Backup & Transfer Data at Super Speed USB (Universal Serial Bus) 3.0 speeds. The SAT3510BU3 USB (Universal Serial Bus) 3.0 External Hard Drive Enclosure lets you connect a 3.5in SATA hard drive through USB (Universal Serial Bus) 3.0
- a cutting edge external storage solution that lets you harness the speed & performance supported by the Super Speed USB (Universal Serial Bus) interface. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computers storage/backup capabilities. Supporting data transfer rates of up to 5 Gbps, this external HDD enclosure delivers access to files at lightning fast speeds
- 10x that of USB (Universal Serial Bus) 2.0, & 60% faster than SATA II e SATA. Plus, the USB (Universal Serial Bus) 3.0 interface is backward compatible with USB (Universal Serial Bus) revisions 2.0 & 1.1, so the enclosure can be used with older systems that dont support the newest USB (Universal Serial Bus) standard, at speeds of 480 Mbps & 12 Mbps (respectively). The drive enclosure features a compact, free-standing design that requires minimal desk space, & is equipped with an 80mm fan that helps keep the installed hard drive cool for peak performance. This versatile external storage solution is compatible with a broad range of Windows operating systems, as well as Linux & Mac OS X & up.

...

Dock your 2.5in or 3.5in SATA III SSDs/HDDs over USB (Universal Serial Bus) 3.0 with UASP. The SDOCKU33BV UASP-enabled USB (Universal Serial Bus) 3.0 docking station makes it easy for you to connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for large capacity SATA I/II/III drives (tested up to 4TB), & 2.5in or 3.5in drives this HDD/SSD docking station is compatible with virtually any SATA drive, & greatly increases the storage/backup capabilities of your computer. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Dock your 2.5in or 3.5in SATA III SSDs/HDDs over USB (Universal Serial Bus) 3.0 with UASP. The SDOCKU33BV UASP-enabled USB (Universal Serial Bus) 3.0 docking station makes it easy for you to connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The dock performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller to utilize the full potential of your SATA III hard drives. With support for large capacity SATA I/II/III drives (tested up to 4TB), & 2.5in or 3.5in drives this HDD/SSD docking station is compatible with virtually any SATA drive, & greatly increases the storage/backup capabilities of your computer. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. ...

Dock your 2.5" or 3.5" SATA SSDs/HDDs & add USB (Universal Serial Bus) Fast Charge Capacity in a stylish black docking station. The SDOCKU33HB USB (Universal Serial Bus) 3.0 hard drive dock with Fast Charge USB (Universal Serial Bus) hub lets you easily connect & swap 2.5in or 3.5in SATA III hard drives (HDD) & solid state drives (SSD) through an available USB (Universal Serial Bus) port. The enclosure supports UASP & delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is also backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections. The Hard Drive Dock features a built-in 3-port USB (Universal Serial Bus) 3.0 Hub that enables you to connect up to 3 additional USB (Universal Serial Bus) 3.0 devices to your computer through the same USB (Universal Serial Bus) connection. One of the ports on the hub also has Fast Charging capabilities, that charges iPad & other mobile devices as effectively as through a wall plug. This Fast Charge Port has been specially designed for compatibility with a wide range of tablets & smartphones. Enhanced with UASP, the dock supports up to 70% faster performance than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds to utilize the full potential of your SATA III hard drives. With support for SATA I/II/III, large capacity drives (tested up to 4TB), & 2.5in or 3.5in hard drives this HDD/SSD docking station is compatible with virtually any SATA hard drive, & greatly increases the storage/backup capabilities of your computer. Plus, configurable power management reduces energy consumption, & extends the life of your drives by avoiding unnecessary access. Extend the value of this hard drive docking station further with the addition of the SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in IDE hard drive into a SATA hard drive dock. ...