The SBAY5BK SAS/SATA Mobile Rack provides a simple, hot-swappable internal storage solution with support for up to five 3.5in SAS or SATA (SATA, SATA II, SATA III-6 Gbps) hard drives. The SAS/SATA backplane can be mounted into a 4U server/4U rack mounted case, helping to increase internal space efficiency; to help keep installed drives running at optimal temperatures, the 5 drive backplane features two rear-mounted 60mm cooling fans & is constructed of aluminum & steel for maximum heat dissipation. The RAID compatible SAS/SATA backplane delivers data transfer rates of up to 6 Gbps to provide maximum performance for enhanced storage applications. ...

Hot swap up to three 3.5in SATA hard drives in seconds. This 3 Bay SATA Mobile Rack lets you swap between 3.5in Serial ATA (SATA, SATA II, & SATA III-6 Gbps) hard drives in seconds. A time saving storage solution, the mobile rack offers three trayless SATA hard drive bays, allowing you to hot swap Serial ATA hard drives but avoid having to mount the drives to trays for deployment or unfasten them for replacement. Supporting up to three hard drives, the mobile SATA hot swap rack only takes up two 5.25in drive bays inside a host computer
- maximizing space-efficiency within the computer. With support for SATA HDD speeds up to 6.0 Gbps, the mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance & versatility for enhanced storage applications. Using Terabyte hard drives? Dont expose your hard drive & valuable data to unnecessary heat! The HSB320SATBK has two built-in 40mm fans that re-distribute the heat build-up generated as a result of typical drive operation. This feature is especially important for larger volume storage drives, & faster "spinning" drives (i.e. 7200 RPM), as it can help optimize drive operability & in turn preserve stored data integrity.
...

Hot swap up to four 3.5in SATA hard drives in seconds. This 4 Bay SATA Mobile Rack lets you swap between 3.5in Serial ATA (SATA, SATA II, SATA III-6 Gbps) hard drives in seconds. A time saving storage solution, the mobile rack offers four trayless SATA hard drive bays, allowing you to hot swap Serial ATA hard drives but avoid having to mount the drives to trays for deployment or unfasten them for replacement. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. Supporting up to four hard drives, the mobile SATA hot swap rack only takes up three 5.25in drive bays inside a host computer
- maximizing space-efficiency within the computer. The mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance & versatility for enhanced storage applications. Using Terabyte hard drives? Dont expose your Hard Drive & valuable data to unnecessary heat! The HSB430SATBK has two built-in 40mm fans that re-distribute the heat build-up generated as a result of typical drive operation. This feature is especially important for larger volume storage drives, & faster "spinning" drives (i.e 7200 RPM), as it can help optimize drive operability & in turn preserve stored data integrity.
...

Connect two SATA Hard Drives to a single internal SATA connection, & build a RAID array for accelerated performance or secure data redundancy. The S322SAT3R internal drive-mounted SATA RAID adapter lets you connect two SATA hard drives to a single SATA connector on your motherboard, & build a hardware RAID array. This versatile RAID adapter features a built-in hardware RAID controller, supporting JBOD, BIG, RAID 0, & RAID 1
- to achieve greater drive capacity, secure data redundancy or enhanced system performance. With two included SATA cables you'll have everything you need to ensure a hassle-free installation. This plug-&-play HDD adapter is easy to install, mounting directly to your drive without any additional hardware or software installation. To ensure compatibility with your computer system, the S322SAT3R supports all of the leading operating systems, including: Microsoft Windows (8/7/ Vista/XP/ Server 2008/ Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, & Google Chrome OS. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD RAID controller supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller.
...

Connect two SATA Hard Drives to a single internal SATA connection, & build a RAID array for accelerated performance or secure data redundancy. The S322SAT3R internal drive-mounted SATA RAID adapter lets you connect two SATA hard drives to a single SATA connector on your motherboard, & build a hardware RAID array. This versatile RAID adapter features a built-in hardware RAID controller, supporting JBOD, BIG, RAID 0, & RAID 1
- to achieve greater drive capacity, secure data redundancy or enhanced system performance. With two included SATA cables you'll have everything you need to ensure a hassle-free installation. This plug-&-play HDD adapter is easy to install, mounting directly to your drive without any additional hardware or software installation. To ensure compatibility with your computer system, the S322SAT3R supports all of the leading operating systems, including: Microsoft Windows (8/7/ Vista/XP/ Server 2008/ Server 2003), Apple OSX (10.9/10.8/10.7/10.6), Linux, & Google Chrome OS. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD RAID controller supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller.
...

Connect a 2.5in or 3.5in SATA hard drive to your computer through USB (Universal Serial Bus) 3.0 or e SATA. The SATDOCKU3E USB (Universal Serial Bus) 3.0/e SATA to SATA Hard Drive Docking Station provides quick & easy access to a 2.5in or 3.5in SATA hard disk drive (HDD) or solid state drive (SSD) through either e SATA or USB (Universal Serial Bus) connectivity, making it compatible with almost any system. The HDD docking station supports large capacity drives (tested with up to 4 TB 3.5" & 1 TB 2.5" drives), which enables you to greatly enhance your computer's storage/backup capabilities. The hard drive dock offers e SATA or USB (Universal Serial Bus) 3.0 host connections (3 Gbps, 5 Gbps bandwidth respectively), & is backward compatible with USB (Universal Serial Bus) 2.0 (up to 480 Mbps) connections to the host computer. To simplify HDD installation & swapping drives in & out of the dock, the SATDOCKU3E features a top slot-loading design, for easy access. ...

Exactly duplicate one 2.5in or 3.5in SATA hard drive to another, effortlessly & without a computer. The SATDOCK22RE USB (Universal Serial Bus) & e SATA Standalone Duplicator Dock lets you duplicate/clone an existing hard drive without the use of a host computer system, or can be connected to a computer system for use as an external hard drive dock. As a hard drive duplicator, you can create an exact 1 to 1 sector clone from one hard drive to another, including partition & boot sector information & all data, at a rate of 72MB/second
- ensuring data integrity & consistency for sensitive operations, such as data recovery. As an external hard drive dock, the duplicator/dock supports plug-&-play installation & can be connected to your host computer through USB (Universal Serial Bus) 2.0 or e SATA, providing data transfer speeds up to 480 Mbps or 3 Gbps respectively from the hard drives to your computer system. Large capacity drives (tested with up to 4TB 3.5" & 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities. Not having to install the hard drives into an enclosure or tray system allows for quick setups
- a perfect solution for situations that require swapping through multiple drives, which combined with no driver or software installation requirements delivers a convenient & versatile storage solution. The value of this hard drive docking station can be extended, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.

...

Exactly duplicate one 2.5in or 3.5in SATA hard drive to another, effortlessly & without a computer. The SATDOCK22RE USB (Universal Serial Bus) & e SATA Standalone Duplicator Dock lets you duplicate/clone an existing hard drive without the use of a host computer system, or can be connected to a computer system for use as an external hard drive dock. As a hard drive duplicator, you can create an exact 1 to 1 sector clone from one hard drive to another, including partition & boot sector information & all data, at a rate of 72MB/second
- ensuring data integrity & consistency for sensitive operations, such as data recovery. As an external hard drive dock, the duplicator/dock supports plug-&-play installation & can be connected to your host computer through USB (Universal Serial Bus) 2.0 or e SATA, providing data transfer speeds up to 480 Mbps or 3 Gbps respectively from the hard drives to your computer system. Large capacity drives (tested with up to 4TB 3.5" & 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities. Not having to install the hard drives into an enclosure or tray system allows for quick setups
- a perfect solution for situations that require swapping through multiple drives, which combined with no driver or software installation requirements delivers a convenient & versatile storage solution. The value of this hard drive docking station can be extended, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.

...

Connect a 2.5in or 3.5in SATA hard drive to your computer through USB (Universal Serial Bus) 3.0 or e SATA. The SATDOCKU3E USB (Universal Serial Bus) 3.0/e SATA to SATA Hard Drive Docking Station provides quick & easy access to a 2.5in or 3.5in SATA hard disk drive (HDD) or solid state drive (SSD) through either e SATA or USB (Universal Serial Bus) connectivity, making it compatible with almost any system. The HDD docking station supports large capacity drives (tested with up to 4 TB 3.5" & 1 TB 2.5" drives), which enables you to greatly enhance your computers storage/backup capabilities. The hard drive dock offers e SATA or USB (Universal Serial Bus) 3.0 host connections (3 Gbps, 5 Gbps bandwidth respectively), & is backward compatible with USB (Universal Serial Bus) 2.0 (up to 480 Mbps) connections to the host computer. To simplify HDD installation & swapping drives in & out of the dock, the SATDOCKU3E features a top slot-loading design, for easy access. ...

Turns any 3.5in SATA hard drive into a rugged, hot-swap storage solution for a 5.25in bay. This high quality Removable SATA Hard Drive Drawer/ Mobile Rack delivers a professional-grade hot-swap solution, allowing you to quickly swap SATA hard drives in/out of a computer without having to open the computer case. The mobile rack is fully compatible with RAID installations to ensure maximum performance & versatility for enhanced storage applications. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. Simply install the drive bay into a 5.25in bay on the host computer, then mount a 3.5in SATA HDD into the (removable) caddy. Connecting the SATA hard drive to the computer is as easy as inserting the caddy into the drive bay, which can be locked to prevent unauthorized removal of the drive. Features a front panel ball bearing fan, aluminum construction & 25K insertion rating. This product is interchangeable as a replacement for Stor Case SATA models S21J111, SC21J111 & RJR110. ...