The DPE-301GS Po E splitter is used with end devices such as wireless access points, IP cameras & Vo IP phones that don't natively support Po E, but rather require DC power input. It receives Po E power on a network cable from a Po E switch or midspan injector, & splits the Ethernet & DC power into two separate cables. One cable provides the DC power, & the other cable provides the Ethernet signal. The DPE-301GS Po E splitter has two 10 / 100 / 1000 RJ-45 ports. One port is for Po E input, which is the network connection & is usually connected to a remote Po E switch or injector. The other port is for LAN output, which is the connection that provides the Ethernet signal to the end device. ...

The DPE-101GI Power Over Ethernet (Po E) Injector is designed to supply a power & data connection to Po E devices such as an IP Camera or Wireless Access Point. The DPE-101GI gives you the ability to mount your Po E device virtually anywhere in a building, such as on ceilings or near entryways, by eliminating the need for a nearby power outlet & attached power supply. D-Link’s DPE-101GI combines electrical power with a Gigabit network connection & produces a Gigabit Power over Ethernet (Po E) signal, allowing a single Ethernet cable to carry both data & power to a device. Cost Efficient Flexibility Deploying the DPE-101GI saves both installation costs & equipment costs, allowing a single RJ-45 Ethernet cable to carry both power & data to each device. This reduces cables, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable place, & most of all, reduces installation time. The Power over Ethernet solution frees IP surveillance cameras & wireless AP deployments from the restrictions of power outlet locations. High Speed Connectivity The DPE-101GI Power Over Ethernet (Po E) Injector is designed to be deployed in situations where high bandwidth is demanded. Examples where the DPE-101GI is ideal include powering network devices such as wall mounted PTZ (Pan, Tilt & Zoom) network cameras, ceiling mounted PTZ dome network cameras, video & voice over IP (Vo IP) telephones, & multichannel (11a/b/g/n) wireless LAN access points. ...

This transceiver uses the industry-standard Small form Pluggable (SFP) package. It slides into the mini-GBIC slot of the Gigabit device. Like all D-Link mini-GBIC transceivers, it is hot-swappable: you can remove or replace the transceiver with the system powered on, which allows modules to be added or swapped without interrupting the network. ...

This transceiver uses the industry-standard Small form Pluggable (SFP) package. It slides into the mini-GBIC slot of the Gigabit device. Like all D-Link mini-GBIC transceivers, it is hot-swappable: you can remove or replace the transceiver with the system powered on, which allows modules to be added or swapped without interrupting the network. ...

This transceiver uses the industry-standard Small form Pluggable (SFP) package. It slides into the mini-GBIC slot of the Gigabit device. Like all D-Link mini-GBIC transceivers, it is hot-swappable: you can remove or replace the transceiver with the system powered on, which allows modules to be added or swapped without interrupting the network. ...

The DXS-1100-10TS 10-Port 10 Gigabit Ethernet Smart Switch provides an entry-level solution for Small & Medium Businesses wishing to deploy 10 Gb Ethernet. 8 x 10 GBase-T ports instantly increases network bandwidth over standard Cat 6a cabling without the need to overhaul existing network infrastructure wiring. 2 x 10 Gigabit SFP+ fiber ports provide additional network connection flexibility. ...

The D-Link XFP module provides high-speed 10-Gigabit connection on the secure fiber cable. It provides a single or dual XFP slots & can be slid into an open slot of a D-Link Gigabit switch. A number of 10 Gigabit transceivers are available for selection for installation in the XFP slot. Data transfer is operated in the full-duplex mode at 20 Gigabits per second on either the multi-mode or single-mode fiber network cable, depending on the type of transceiver being installed. The D-Link XFP module allows flexible deployment of 10-Gigabitconnection & is ideal for bandwidth-hungry applications that can meet greater cable distances & low signal interference requirements in the Local Area Network, Wide Area Network & Metropolitan Area Network. ...

The D-Link XFP module provides high-speed 10-Gigabit connection on the secure fiber cable. It provides a single or dual XFP slots & can be slid into an open slot of a D-Link Gigabit switch. A number of 10 Gigabit transceivers are available for selection for installation in the XFP slot. Data transfer is operated in the full-duplex mode at 20 Gigabits per second on either the multi-mode or single-mode fiber network cable, depending on the type of transceiver being installed. The D-Link XFP module allows flexible deployment of 10-Gigabitconnection & is ideal for bandwidth-hungry applications that can meet greater cable distances & low signal interference requirements in the Local Area Network, Wide Area Network & Metropolitan Area Network. ...

D-Links 10-port Third Generation Gigabit Smart Po E Switch is designed to provide small to medium businesses complete control over their network. In a 13" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation & IGMP Snooping. Network maintenance features include Loopback Detection & Cable Diagnostics. Eight of the 10 switch ports include Power over Ethernet (Po E), which gives administrators the ability to connect 802.3at pre-standard equipment such as 802.11n wireless Access Points, in parallel with standard 802.3af equipment. The Po E function is programmable, so you can cut your energy bill by switching the power off at certain times. The DGS-1210-10P features state-of-the-art security technologies including ACL filtering & 802.1X authentication. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DGS-1210-10P uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (Qo S) & granular bandwidth control down to 64 kbps are also included. A characteristic of D-Links web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Links D-View 6.0. D-Links Smart Console utility is also included for the joint management of several switches. The DGS-1210-10P is D-Link Green certified, for the energy savings that it provides without sacrificing operational performance or functionality. ...

D-Link's 10-port Third Generation Gigabit Smart Po E Switch is designed to provide small to medium businesses complete control over their network. In a 13" metal case with innovative fanless design, the switch incorporates a complete lineup of Layer 2 features, including Port Mirroring, Spanning Tree, Link Aggregation & IGMP Snooping. Network maintenance features include Loopback Detection & Cable Diagnostics. Eight of the 10 switch ports include Power over Ethernet (Po E), which gives administrators the ability to connect 802.3at pre-standard equipment such as 802.11n wireless Access Points, in parallel with standard 802.3af equipment. The Po E function is programmable, so you can cut your energy bill by switching the power off at certain times. The DGS-1210-10P features state-of-the-art security technologies including ACL filtering & 802.1X authentication. With D-Link Safeguard Engine, the switch remains available in the event of a virus outbreak. Furthermore, the DGS-1210-10P uses Auto Voice VLAN, ensuring higher priority for voice traffic. Quality of Service (Qo S) & granular bandwidth control down to 64 kbps are also included. A characteristic of D-Link's web Smart Switches is their ease of use, via a simple web browser. Advanced users can also configure the switch via Telnet or SNMP package such as D-Link's D-View 6.0. D-Link's Smart Console utility is also included for the joint management of several switches. The DGS-1210-10P is D-Link Green certified, for the energy savings that it provides without sacrificing operational performance or functionality. ...