Designed to support distances up to 300 meters, the DEM-421XT is a high performance 850nm Multi-Mode XFP transceiver. Supporting Full-duplex, 10 Gigabit speeds on Multi-Mode fiber cables, the DEM-421XT is 802.3ae 10GBASE-SR compliant & supports Full-duplex 802.3x Flow control. The DEM-421XT provides the necessary signal amplification for data to be transmitted to the network cable from the port, & vice versa. The DEM-421XT is hot swappable. You can remove or replace the transceiver with the system powered on. This permits transceivers to be added or swapped without interrupting network systems. ...

Designed to support distances up to 300 meters, the DEM-421XT is a high performance 850nm Multi-Mode XFP transceiver. Supporting Full-duplex, 10 Gigabit speeds on Multi-Mode fiber cables, the DEM-421XT is 802.3ae 10GBASE-SR compliant & supports Full-duplex 802.3x Flow control. The DEM-421XT provides the necessary signal amplification for data to be transmitted to the network cable from the port, & vice versa. The DEM-421XT is hot swappable. You can remove or replace the transceiver with the system powered on. This permits transceivers to be added or swapped without interrupting network systems. ...

The DPE-301GS Po E splitter is used with end devices such as wireless access points, IP cameras & Vo IP phones that don't natively support Po E, but rather require DC power input. It receives Po E power on a network cable from a Po E switch or midspan injector, & splits the Ethernet & DC power into two separate cables. One cable provides the DC power, & the other cable provides the Ethernet signal. The DPE-301GS Po E splitter has two 10 / 100 / 1000 RJ-45 ports. One port is for Po E input, which is the network connection & is usually connected to a remote Po E switch or injector. The other port is for LAN output, which is the connection that provides the Ethernet signal to the end device. ...

The DPE-101GI Power Over Ethernet (Po E) Injector is designed to supply a power & data connection to Po E devices such as an IP Camera or Wireless Access Point. The DPE-101GI gives you the ability to mount your Po E device virtually anywhere in a building, such as on ceilings or near entryways, by eliminating the need for a nearby power outlet & attached power supply. D-Link’s DPE-101GI combines electrical power with a Gigabit network connection & produces a Gigabit Power over Ethernet (Po E) signal, allowing a single Ethernet cable to carry both data & power to a device. Cost Efficient Flexibility Deploying the DPE-101GI saves both installation costs & equipment costs, allowing a single RJ-45 Ethernet cable to carry both power & data to each device. This reduces cables, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable place, & most of all, reduces installation time. The Power over Ethernet solution frees IP surveillance cameras & wireless AP deployments from the restrictions of power outlet locations. High Speed Connectivity The DPE-101GI Power Over Ethernet (Po E) Injector is designed to be deployed in situations where high bandwidth is demanded. Examples where the DPE-101GI is ideal include powering network devices such as wall mounted PTZ (Pan, Tilt & Zoom) network cameras, ceiling mounted PTZ dome network cameras, video & voice over IP (Vo IP) telephones, & multichannel (11a/b/g/n) wireless LAN access points. ...

This transceiver uses the industry-standard Small form Pluggable (SFP) package. It slides into the mini-GBIC slot of the Gigabit device. Like all D-Link mini-GBIC transceivers, it is hot-swappable: you can remove or replace the transceiver with the system powered on, which allows modules to be added or swapped without interrupting the network. ...

This transceiver uses the industry-standard Small form Pluggable (SFP) package. It slides into the mini-GBIC slot of the Gigabit device. Like all D-Link mini-GBIC transceivers, it is hot-swappable: you can remove or replace the transceiver with the system powered on, which allows modules to be added or swapped without interrupting the network. ...

The DKVM-CB Keyboard, Video, & Mouse (KVM) cable is a 6 foot cable that is compatible with D-Link DKVM series KVM Switches. It is also compatible with most KVM switches available on the market today. Each end of the cable

Includes:: a keyboard & mouse connector (6 pin Mini-Din Male) & a video connector (15 Pin HDD Male). The Video cable is designed to ensure the highest quality of video over a KVM switch connection.

...

The DXS-1100-10TS 10-Port 10 Gigabit Ethernet Smart Switch provides an entry-level solution for Small & Medium Businesses wishing to deploy 10 Gb Ethernet. 8 x 10 GBase-T ports instantly increases network bandwidth over standard Cat 6a cabling without the need to overhaul existing network infrastructure wiring. 2 x 10 Gigabit SFP+ fiber ports provide additional network connection flexibility. ...

The D-Link XFP module provides high-speed 10-Gigabit connection on the secure fiber cable. It provides a single or dual XFP slots & can be slid into an open slot of a D-Link Gigabit switch. A number of 10 Gigabit transceivers are available for selection for installation in the XFP slot. Data transfer is operated in the full-duplex mode at 20 Gigabits per second on either the multi-mode or single-mode fiber network cable, depending on the type of transceiver being installed. The D-Link XFP module allows flexible deployment of 10-Gigabitconnection & is ideal for bandwidth-hungry applications that can meet greater cable distances & low signal interference requirements in the Local Area Network, Wide Area Network & Metropolitan Area Network. ...

The D-Link XFP module provides high-speed 10-Gigabit connection on the secure fiber cable. It provides a single or dual XFP slots & can be slid into an open slot of a D-Link Gigabit switch. A number of 10 Gigabit transceivers are available for selection for installation in the XFP slot. Data transfer is operated in the full-duplex mode at 20 Gigabits per second on either the multi-mode or single-mode fiber network cable, depending on the type of transceiver being installed. The D-Link XFP module allows flexible deployment of 10-Gigabitconnection & is ideal for bandwidth-hungry applications that can meet greater cable distances & low signal interference requirements in the Local Area Network, Wide Area Network & Metropolitan Area Network. ...