Cleans injector seats & chambers when changing or reconditioning diesel injectors Helps to avoid blow-back due to poorly seated injectors Now

Includes:: removal tool for copper washers, injector blanking plugs to avoid debris entering the cylinders, wire brush cleaning set for chamber walls & new centralising stem to improve correct cleaning seating angle

...

EGR Valve Activator for testing & cleaning valve as part of routine servicing – no need to remove valve from vehicle for use Choice of 2 test cycles: 1) Short test accessed by a short press of the button, 2) Full 90 second test via a longer button press; at end of either test cycle the tool gives an audible indication when a faulty & unserviceable EGR valve is connected A scan tool connected via the EOBD socket, may give an indication of a fault with an EGR valve. The Scan Tool will identify if the valve is receiving a signal correctly, & may indicate a reaction to commands from the ECU, but with limited ability for the valve to move correctly if it is jammed with carbon deposits Prevents the unnecessary replacement of EGR Valves & prolongs their operation life Actuates EGR Valves in a fixed open position for cleaning, & in an open / closed sequence for freeing carbon deposits Supplied with 3 x connectors for different makes of valves (1 x FEP connector for applications as per chart, plus 1.2 & 2.8 twin TYCO terminals for a wide variety of apps) Just connect tool to EGR valve plug & select option to proceed
Features: Multibrand applications Temperature Range: ? 20° to + 60°C Accuracy installation time: (valve dismantled) 10 seconds Power Supply: 220 ? 240V mains electricity only Open / Close Time Cycle: 90 sec Dimensions: 45 x 140 x 30 mm Weight: 200 gr Contents: EGR Valve Tester + Instruction Leaflet Protection: IP51 Quality: Ro HS, DEEE, REACH
...

An All-Makes Service Tool for electronically controlled Brake Service functions Functions included: EPB Tool EPB
- Brake
...

Retrieve fuel following a filling error (e.g. petrol instead of diesel), removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc Fuel Extractor / Retriever Operates from workshop compressed air (no risk of sparks) Mobile 45-litre tank (on wheels) Cleanly draws up or pushes out fuel due to a venturi system

Includes:: 2 anti-static ground cables, overflow line & 3 fuel probes Emptying via the tank filler neck or fuel lines made from stainless stee

...

Unique Sykes-Pickavant design of vice-mounted Coil Spring Compressor Features double-ended hex drive (2 x 24mm hex) for ease of use Can be operated from either end using ratchet or 24mm wrench Hex drives at both ends, incorporate shear-pins for safety Features external thrust bearing for ease of service Heat treated, Self-lubricating operating screw Safe Working Load = 15000N Supplied with two sets of universal jaws: Medium Jaws – 110-150mm diameter Large Jaws – 140-195mm diameter ...

The NEW Hydraulic Injector Puller Kit is designed to apply 10 Tonnes of vertical pulling force, to help in the removal of seized fuel injectors on modern diesel engines; this kit is compact, so very useful where there is not enough clearance above the injectors for traditional slide hammer pullers to operate. A NEW concept for the removal of stubborn injectors Provides controlled force to aid the removal of seized injectors, where there is insufficient access for traditional slide hammers Uses a multi-position frame, with adjustable legs of different lengths & a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines The combination of variable leg lengths & selection of the appropriate adaptor for the cylinder head, allows the tool to be correctly positioned on most cylinder heads Supplied with injector adaptors for most modern injector types
- M14, M16, M17, M20, M25, M27 10 tonnes Hydraulic Hollow Cylinder provides the force
- use with standard hydraulic pump (Not supplied)

...

Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender & Ford Transit applications The puller is designed to be used with the steering box already removed from the vehicle

Includes:: a force screw allowing a technician to effectively shock the drop arm to become loose from the steering box Jaw spread capacity
- 60mm Jaw reach capacity
- 80mm



...

Impact wrench with a smart design & ergonomically designed handle Single switch can be changed for easy forward or reverse operation Easily adjustable torque regulator Max Torque (REV): 1600 Nm Torque (FWD): 1084 Nm * Noise: 94.2d BA Air consumption: 135L/min Weight: 1.8kg ...

This multi-purpose tool, tests Coolant, Battery Acid & Screenwash, using an Optical prism test technique. Coolant
- tests
...

Stretch Belt Tool for Double Pulley applications Specially designed two-piece tool for installing & dismounting stretch belts on double pulleys where the two pulleys are of different diameters Allows the belt to be installed in one operation Ideal for Ford Focus applications ...