Heavy Duty puller for removal of Bosch, Delphi, Denso & Siemens injectors Features a flexible u?joint adaptor for access in restricted areas Contains 6 x Injector adaptors: M14 x 1.5 ? 08581470 M16 x 1.0 ? 08581670 M17 x 1.0 ? 08581770 M20 x 1.0 ? 08582070 M25 x 1.0 ? 08582570 M27 x 1.0 ? 08582770 Contains 4 x Injector Solenoid removers: M25 ? 01512500 M27 ? 01512700 M29 ? 01512900 M30 ? 01513000 Contains 2 x Nozzle extractors: 6mm tamperproof – 10mm hex ? 08585670 7mm tamperproof – 10mm hex – 08585770 Heavy Duty Slide Hammer: Hammer Weight: 5.0kg Total Weight: 8.0kg ...

The NEW Hydraulic Injector Puller Kit is designed to apply 10 Tonnes of vertical pulling force, to help in the removal of seized fuel injectors on modern diesel engines; this kit is compact, so very useful where there is not enough clearance above the injectors for traditional slide hammer pullers to operate. A NEW concept for the removal of stubborn injectors Provides controlled force to aid the removal of seized injectors, where there is insufficient access for traditional slide hammers Uses a multi-position frame, with adjustable legs of different lengths & a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines The combination of variable leg lengths & selection of the appropriate adaptor for the cylinder head, allows the tool to be correctly positioned on most cylinder heads Supplied with injector adaptors for most modern injector types
- M14, M16, M17, M20, M25, M27 10 tonnes Hydraulic Hollow Cylinder provides the force
- use with standard hydraulic pump (Not supplied)

...

Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender & Ford Transit applications The puller is designed to be used with the steering box already removed from the vehicle

Includes:: a force screw allowing a technician to effectively shock the drop arm to become loose from the steering box Jaw spread capacity
- 60mm Jaw reach capacity
- 80mm



...

Impact wrench with a smart design & ergonomically designed handle Single switch can be changed for easy forward or reverse operation Easily adjustable torque regulator Max Torque (REV): 1600 Nm Torque (FWD): 1084 Nm * Noise: 94.2d BA Air consumption: 135L/min Weight: 1.8kg ...

This multi-purpose tool, tests Coolant, Battery Acid & Screenwash, using an Optical prism test technique. Coolant
- tests
...

For modern front wheel drive vehicles with or without pilot / spigot bearings with flywheel fitting diameters from 12 – 20mm The tools main advantage is that it

Includes:: parallel expanding supports in place of more traditional tapered fittings that are hard to keep located Easy to swap over adaptors suitable for clutch centre sizes from 14.4 to 29mm

Includes:: small cone: 14.4
- 21mm, large cone: 20.9
- 29mm & sleeves: 12, 14, 15, 16, 17, 18, 19, 20mm





...

Universal tool set for extracting & drawing-in of bushes, bearings, seals etc Standard Universal applications
- Car
-

...

Universal support for use with a workshop press Three point contact guarantees a perfect, safe support Easily press bearings on a wide variety of suspension arms Adjustable height anvil bolts Swivel element for added versatility Safety alignment brackets for security on press ...

A unique concept
- allows for the controlled application of force via air powered impact blows Built-in shock absorbers minimises
...

TAMCO’s all new RAID 1:10 Brushless buggy gives you the wow factor without giving your wallet the ouch factor. The RAID is built on a Metal countersunk chassis which has had a unique Carbon Fibre wrap applied, & is also kitted out with Metal Front & Rear shock towers. Power is supplied by a high power brushless motor & a waterproof ESC. Power is delivered to the wheels by the 4WD system & is helped by the large bore fully adjustable shocks. Throughout the car you will notice features usually found on models with a much higher price tag like fully adjustable turnbuckles, a 10kg waterproof steering servo, sealed receiver box, 2.4ghz radio equipment Light weight anodized metal drive shaft. Add into this a rechargeable 3000mah Ni Mh battery pack & mains charger & your ready to go in no time. Key
Features: 1:10 Ready to run brushless buggy  2.4ghz Radio system supplied & installed  High power 3650 kv 3215 brushless motor  Waterproof 45A ESC  High power, 10kg waterproof steering servo  Metal countersunk chassis  Large bore adjustable shocks  Turnbuckles all round  High grip racing tyres  Fully ball raced  Carbon fibre wrapped chassis  Li Po ready, with deans plugs pre-installed  3000mah Ni Mh battery pack & charger supplied  Specifications: Top Speed: 40mph (Approx.)  Overall length: 385mm 

Height: 150mm 

Width: 240mm  Wheelbase: 270mm  Required: Required 8 x AA Batteries for transmitter Note: For ages 14+




...