More From Contributor

This Golfsmith gauge measures face-to-sole angle

Dimensions of all clubheads including wood, hybrids, irons & putters.

...

Available

Product Description The Moment of Inertia Scale measures the MOI of the completed golf club. This is the entire basis on which swingweighting was designed. The fully automatic device prompts users for basic club data. This high-tech scale performs matching calculations automatically without the need for additional software. This saves your valuable time because the instrument does not need to be connected to a personal computer. The scale is offered with our MOI matching & data collection software to help clubmakers easily collect & store data for their customers. The hosel to sole (HTS) measurement is an important

Specification to know for clubhead analysis.

...

Archived Product

Product Description This handy bench design features a 180° swivel base to help clubmakers easily perform a variety of clubmaking tasks. The tool comes with four interchangeable jaws soft aluminium V design for steel shafts, rubber V design for graphite shafts, round rubber jaws for gripping & clamping & flat jaws for irons & other jobs. This bench vice also features a built-in ferrule setter & extractor to help clubmakers multitask. Specifications: Jaw

Width: 75mm (3") Throat opening: >75 mm Bench to Top

Height: >125 mm (5")

...

Archived Product

This handy bench design features a 180Â° swivel base to help clubmakers easily perform a variety of clubmaking tasks. The tool comes with four interchangeable jaws â soft aluminium V design for steel shafts, rubber V design for graphite shafts, round rubber jaws for gripping & clamping & flat jaws for irons & other jobs. This bench vice also features a built-in ferrule setter & extractor to help clubmakers multitask. Specifications: Jaw

Width: 75mm (3") Throat opening: >75 mm Bench to Top

Height: >125 mm (5")

...

Available

Simply mount to a wall or workbench to allow clubs to dry after gripping. ...

Available

The Golfsmith Frequency Analyser is the industry&0s state-of-the-art measurement device for determining shaft frequency characteristics. Able to measure in both cycles per minute (cpm) & hertz for precision data acquisition, selectable measurement modes offer readings up to 1, 000 cpm.!!!!
Features:!!!!
- Strain gauge based sensing technology for accurate shaft frequency measurement
- Shielded electronics against electromagnetic interference
- Expanded shaft frequency measuring range from as low as 90 cpm to 1, 000 cpm
- Five-digit liquid crystal display with selectable resolution for whole numbers to tenths or hundredths
- Averaging mode can be adjusted to average from 2 to 5 measurements
- Analog signal out function means that you can listen, watch & measure the shaft via a computer interface, PC sound card & shareware software (function is provided but not supported).
- RS-232 Connector PC interface.
- Single-dial speed handle & torque limiting knob screw make clamping fast & easy without fear of over tightening
- All-aluminium construction (T6 heat treated, silver blasted & anodised). Metal housing is also finished with a durable enamel coating
- 205-gram tip weight (ASTM standard) included with each purchase (extras sold separately)

...

Available

Product Description This aluminium-encased universal rubber shaft clamp is sized for snug fits on shaft tips for shaft prepping & shaft midsections for gripping, shaft trimming or any number of club repairs. Ultra-durable metal casing provides a non-slip surface. Measurements: 2 7/8" long 1 1/8" wide (metal with a ¼ of rubber) 1 ¼" across top 1 ½" side ...

Archived Product

This aluminium-encased universal rubber shaft clamp is sized for snug fits on shaft tips for shaft prepping & shaft midsections for gripping, shaft trimming or any number of club repairs. Ultra-durable metal casing provides a non-slip surface.!!!! Measurements:!!!! 2 7/8" long 1 1/8" wide (metal with a Â¼â of rubber) 1 Â¼" across top 1 Â½" side ...

Archived Product

Product Description Designed by the Golfsmith R&D team, our Professional Bench Ruler has its markings above where the club or shaft lies. This allows easy, exact measurements for any shaft tip or butt trim markings, or final length markings. The ruler can easily be mounted to your workbench.

Features: Measures 49" L x 4" W

...

Archived Product

Designed by the Golfsmith R&D team, our Professional Bench Ruler has its markings above where the club or shaft lies. This allows easy, exact measurements for any shaft tip or butt trim markings, or final length markings. The ruler can easily be mounted to your workbench.!!!!
Features:!!!! Measures 49" L x 4" W
...

Available

Golfsmith Pro Frequency Analyser

Product Description The Golfsmith Frequency Analyser is the industry's state-of-the-art measurement device for determining shaft frequency characteristics. Able to measure in both cycles per minute (cpm) and hertz for precision data acquisition, selectable measurement modes offer readings up to 1, 000 cpm. Features:- Strain gauge based sensing technology for accurate shaft frequency measurement- Shielded electronics against electromagnetic interference- Expanded shaft frequency measuring range from as low as 90 cpm to 1, 000 cpm- Five-digit liquid crystal display with selectable resolution for whole numbers to tenths or hundredths- Averaging mode can be adjusted to average from 2 to 5 measurements- Analog signal out function allows you to listen, watch and measure the shaft via a
computer interface, PC sound card and shareware software (function is provided but not supported).- RS-232 Connector PC interface.- Single-dial speed handle and torque limiting knob screw make clamping fast and easy without fear of over tightening- All-aluminium construction (T6 heat treated, silver blasted and anodised). Metal housing is also finished with a durable enamel coating- 205-gram tip weight (ASTM standard) included with each purchase (extras sold separately)

Availability: Out Of Stock
Supplier: Gamola Golf
SKU: MASW-TL195

Description Reviews / Comments Add New

Product Description

Product Description The Golfsmith Frequency Analyser is the industry's state-of-the-art measurement device for determining shaft frequency characteristics. Able to measure in both cycles per minute (cpm) & hertz for precision data acquisition, selectable measurement modes offer readings up to 1, 000 cpm.

Features:- Strain gauge based sensing technology for accurate shaft frequency measurement- Shielded electronics against electromagnetic interference- Expanded shaft frequency measuring range from as low as 90 cpm to 1, 000 cpm- Five-digit liquid crystal display with selectable resolution for whole numbers to tenths or hundredths- Averaging mode can be adjusted to average from 2 to 5 measurements- Analog signal out function means that you can listen, watch & measure the shaft via a computer interface, PC sound card & shareware software (function is provided but not supported).- RS-232 Connector PC interface.- Single-dial speed handle & torque limiting knob screw make clamping fast & easy without fear of over tightening- All-aluminium construction (T6 heat treated, silver blasted & anodised). Metal housing is also finished with a durable enamel coating- 205-gram tip weight (ASTM standard) included with each purchase (extras sold separately)

Reviews/Comments

Add New

Jargon Buster

Aluminium - Corrosion resistant lightweight metal

Silver - A colour based on the colour of the metal

Silver - A chemical element, metalic. Has the highest elctrical conductance of any element. Also known for its exceptional anitmicrobal properties

Gram - 1000 Grams is equal to 1 Kilogram

Computer - A programmable electronic machine which stores and manipulates data.

Resolution - The number of pixels a device can display

Frequency - A term used to describe how often something is done

Frequency - A wave frequency is the number of times a wave repeats within a given time

Liquid - A state of matter - fluid form

Heat - A term used to define thermal energy

Minute - A measurement of time, 60 seconds is equal to one minute

Watch - A small clock designed to be worn on a person

PC - Personal Computer - an electronic device for acheiving multiple electronic tasks including word processing, emails and internet access

Torque - Torque is a measure of the turning force of an object. Such as a wrench turning a bolt, the higher the toque the higher the capability of undoing a tight bolt.

weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz

speed - A measurement of how fast an object travels between two points

Accurate - A measurement of precision when all elements are correct.

Crystal - A solid substance that has symmetrically carved plane faces and can be regularly found in jewellery.

Crystal - A solid clear substance with many surfaces that glisten, commonly used in jewellery

Crystal - A solid substance with symmetrically arranged planes, commonly found in jewellery.

Torque - The force used to turn, rotate, an object about an axis. The higher the torque the greater the ability to turn.

Supplier Information

Gamola Golf

Tee off in style with Gamola Golf (http://www.gamolagolf.co.uk/)! Explore our extensive selection of premium golf equipment, accessories, and apparel, meticulously curated to elevate your game. From cutting-edge clubs to stylish attire, we offer everything you need to step onto the green with confidence. With top brands like Callaway, TaylorMade, and Titleist, you can trust in quality and performance. Whether you're a seasoned pro or a novice golfer, Gamola Golf has the gear to help you drive, chip, and putt your way to success. Unleash your potential and dominate the fairways with Gamola Golf!

More From Contributor

Golfsmith Pro Frequency Analyser

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account