{ Summary} An economical alternative to a full loft/lie bending machine, the Club Bending Vise enables precise iron head adjustments at a price one-third of that of many machines. Simply secure the clubhead in the vise using the heavy-duty machined parts, & bend the hosel with the Hi-Tech Adjustable Bending Bar (sold separately, works with any bending machine).

Features: &8226; Radiused topline clamp combines with back clamp to better secure heads &8226; Brass sole supports further enhance holding ability &8226; Iimproved base permits easier bolting to bench or stand &8226; Bolts to workbench &8226; Holds right- or left-handed heads &8226; Works on most irons &8226;A magnetic protractor can be used for determining accuracy Caution: Do not use on irons with medallions in the cavity.

...

Product Description The special hitting surface material on this Golfsmith Lie Board leaves a small temporary mark on the sole of the clubhead indicating lie angle at impact. For best results, have the golfer stand level with the board, which is 1/8" thick.

Features: Durable; size is 7 1/2" x 15 7/8" Works with or without tape

...

The special hitting surface material on this Golfsmith Lie Board leaves a small temporary mark on the sole of the clubhead indicating lie angle at impact. For best results, have the golfer stand level with the board, which is 1/8" thick.

Features: • Durable; size is 7 1/2" x 15 7/8" • Works with or without tape

...

Product Description This Golfsmith gauge measures face-to-sole angle

Dimensions of all clubheads including wood,

...

This Golfsmith gauge measures face-to-sole angle

Dimensions of all clubheads including wood, hybrids, irons & putters.

...

Product Description This handy bench design features a 180° swivel base to help clubmakers easily perform a variety of clubmaking tasks. The tool comes with four interchangeable jaws soft aluminium V design for steel shafts, rubber V design for graphite shafts, round rubber jaws for gripping & clamping & flat jaws for irons & other jobs. This bench vice also features a built-in ferrule setter & extractor to help clubmakers multitask. Specifications: Jaw

Width: 75mm (3") Throat opening: >75 mm Bench to Top

Height: >125 mm (5")



...

This handy bench design features a 180° swivel base to help clubmakers easily perform a variety of clubmaking tasks. The tool comes with four interchangeable jaws — soft aluminium V design for steel shafts, rubber V design for graphite shafts, round rubber jaws for gripping & clamping & flat jaws for irons & other jobs. This bench vice also features a built-in ferrule setter & extractor to help clubmakers multitask. Specifications: Jaw

Width: 75mm (3") Throat opening: >75 mm Bench to Top

Height: >125 mm (5")



...

Simply mount to a wall or workbench to allow clubs to dry after gripping. ...

Product Description The Golfsmith Frequency Analyser is the industry's state-of-the-art measurement device for determining shaft frequency characteristics. Able to measure in both cycles per minute (cpm) & hertz for precision data acquisition, selectable measurement modes offer readings up to 1, 000 cpm.

Features:- Strain gauge based sensing technology for accurate shaft frequency measurement- Shielded electronics against electromagnetic interference- Expanded shaft frequency measuring range from as low as 90 cpm to 1, 000 cpm- Five-digit liquid crystal display with selectable resolution for whole numbers to tenths or hundredths- Averaging mode can be adjusted to average from 2 to 5 measurements- Analog signal out function means that you can listen, watch & measure the shaft via a computer interface, PC sound card & shareware software (function is provided but not supported).- RS-232 Connector PC interface.- Single-dial speed handle & torque limiting knob screw make clamping fast & easy without fear of over tightening- All-aluminium construction (T6 heat treated, silver blasted & anodised). Metal housing is also finished with a durable enamel coating- 205-gram tip weight (ASTM standard) included with each purchase (extras sold separately)

...

The Golfsmith Frequency Analyser is the industry&0s state-of-the-art measurement device for determining shaft frequency characteristics. Able to measure in both cycles per minute (cpm) & hertz for precision data acquisition, selectable measurement modes offer readings up to 1, 000 cpm.!!!!
Features:!!!!
- Strain gauge based sensing technology for accurate shaft frequency measurement
- Shielded electronics against electromagnetic interference
- Expanded shaft frequency measuring range from as low as 90 cpm to 1, 000 cpm
- Five-digit liquid crystal display with selectable resolution for whole numbers to tenths or hundredths
- Averaging mode can be adjusted to average from 2 to 5 measurements
- Analog signal out function means that you can listen, watch & measure the shaft via a computer interface, PC sound card & shareware software (function is provided but not supported).
- RS-232 Connector PC interface.
- Single-dial speed handle & torque limiting knob screw make clamping fast & easy without fear of over tightening
- All-aluminium construction (T6 heat treated, silver blasted & anodised). Metal housing is also finished with a durable enamel coating
- 205-gram tip weight (ASTM standard) included with each purchase (extras sold separately)










...