Product Description The special hitting surface material on this Golfsmith Lie Board leaves a small temporary mark on the sole of the clubhead indicating lie angle at impact. For best results, have the golfer stand level with the board, which is 1/8" thick.

Features: Durable; size is 7 1/2" x 15 7/8" Works with or without tape

...

The special hitting surface material on this Golfsmith Lie Board leaves a small temporary mark on the sole of the clubhead indicating lie angle at impact. For best results, have the golfer stand level with the board, which is 1/8" thick.

Features: • Durable; size is 7 1/2" x 15 7/8" • Works with or without tape

...

Product Description This Golfsmith gauge measures face-to-sole angle

Dimensions of all clubheads including wood,

...

This Golfsmith gauge measures face-to-sole angle

Dimensions of all clubheads including wood, hybrids, irons & putters.

...

Product Description The Moment of Inertia Scale measures the MOI of the completed golf club. This is the entire basis on which swingweighting was designed. The fully automatic device prompts users for basic club data. This high-tech scale performs matching calculations automatically without the need for additional software. This saves your valuable time because the instrument does not need to be connected to a personal computer. The scale is offered with our MOI matching & data collection software to help clubmakers easily collect & store data for their customers. The hosel to sole (HTS) measurement is an important

Specification to know for clubhead analysis.

...

This handy bench design features a 180° swivel base to help clubmakers easily perform a variety of clubmaking tasks. The tool comes with four interchangeable jaws — soft aluminium V design for steel shafts, rubber V design for graphite shafts, round rubber jaws for gripping & clamping & flat jaws for irons & other jobs. This bench vice also features a built-in ferrule setter & extractor to help clubmakers multitask. Specifications: Jaw

Width: 75mm (3") Throat opening: >75 mm Bench to Top

Height: >125 mm (5")



...

Simply mount to a wall or workbench to allow clubs to dry after gripping. ...

Product Description The Golfsmith Frequency Analyser is the industry's state-of-the-art measurement device for determining shaft frequency characteristics. Able to measure in both cycles per minute (cpm) & hertz for precision data acquisition, selectable measurement modes offer readings up to 1, 000 cpm.

Features:- Strain gauge based sensing technology for accurate shaft frequency measurement- Shielded electronics against electromagnetic interference- Expanded shaft frequency measuring range from as low as 90 cpm to 1, 000 cpm- Five-digit liquid crystal display with selectable resolution for whole numbers to tenths or hundredths- Averaging mode can be adjusted to average from 2 to 5 measurements- Analog signal out function means that you can listen, watch & measure the shaft via a computer interface, PC sound card & shareware software (function is provided but not supported).- RS-232 Connector PC interface.- Single-dial speed handle & torque limiting knob screw make clamping fast & easy without fear of over tightening- All-aluminium construction (T6 heat treated, silver blasted & anodised). Metal housing is also finished with a durable enamel coating- 205-gram tip weight (ASTM standard) included with each purchase (extras sold separately)

...

The Golfsmith Frequency Analyser is the industry&0s state-of-the-art measurement device for determining shaft frequency characteristics. Able to measure in both cycles per minute (cpm) & hertz for precision data acquisition, selectable measurement modes offer readings up to 1, 000 cpm.!!!!
Features:!!!!
- Strain gauge based sensing technology for accurate shaft frequency measurement
- Shielded electronics against electromagnetic interference
- Expanded shaft frequency measuring range from as low as 90 cpm to 1, 000 cpm
- Five-digit liquid crystal display with selectable resolution for whole numbers to tenths or hundredths
- Averaging mode can be adjusted to average from 2 to 5 measurements
- Analog signal out function means that you can listen, watch & measure the shaft via a computer interface, PC sound card & shareware software (function is provided but not supported).
- RS-232 Connector PC interface.
- Single-dial speed handle & torque limiting knob screw make clamping fast & easy without fear of over tightening
- All-aluminium construction (T6 heat treated, silver blasted & anodised). Metal housing is also finished with a durable enamel coating
- 205-gram tip weight (ASTM standard) included with each purchase (extras sold separately)










...

Product Description This aluminium-encased universal rubber shaft clamp is sized for snug fits on shaft tips for shaft prepping & shaft midsections for gripping, shaft trimming or any number of club repairs. Ultra-durable metal casing provides a non-slip surface. Measurements: 2 7/8" long 1 1/8" wide (metal with a ¼ of rubber) 1 ¼" across top 1 ½" side ...