United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Power Tools > Cordless Power Tools
Archived Product
-
Ideal for drilling
anchors and fixing holes
into concrete, brick and
masonry from 4mm to 22mm.
Large 19mm optimised
mechanism delivers corded
drilling performance
efficient and compact
gearbox for longer
runtime and lighter
weight
extremely compact design
and rear mounted battery
for excellent balance and
optimum comfort
internal mechanism
connected to external
housings via spring
dampeners meaning
significantly lower
vibration, reduced user
fatigue allowing longer
operating periods
air cooled batteries
supplied as standard
improving runtime when
batteries charged hot and
extending battery life
spring loaded battery
latch system and
guiderail for quick
change and and secure
battery fitment
electronic motor brake
for additional control
impact-stop mode for
rotary drilling only in
wood, ceramic, steel
modular component design
for trouble free
servicing
rubber coated grip to
reduce surface vibration
and user fatigue
specifications
voltage: 24v v
battery: 2.0 ah nicd
power output: 300 watts
no load speed: 1100 rpm
impact energy: 2.1 j
blows per minute: 4200
bpm
tool holder: sds-plus
max. drilling capacity
[wood]: 30 mm
max. drilling capacity
[metal]: 13 mm
max. drilling capacity
[concrete]: 22 mm
weight: 3.8 kg
length: 290 mm
height: 240 mm
includes :1 hour charger,
2 x 2.0ah nicd aircooled
batteries,
multi-position side
handle, grease tube,
heavy-duty carrying
case.
Availability: In Stock
£419.89
Archived Product
-
Features:
expert
quality. compact
hi-torque motor (273nm
max.). variable speed
control. electric
brake. forward/reverse
facility. soft grip
handle and trigger.
supplied complete
with: 125mm extension
bar, four 1/2"square
drivedr. impact sockets
size 17-22mm,
carrying case, 2 x 18v
2.0.ah battery packs,
230v ac 1 hour fast
charger with bs 3 pin
plug. Specification:
maximum torque: 273nm.
impacts per minute: 2500
max. speed (no load):
0-2500r/min. weight
(inc. battery pack): 3kg.
Availability: In Stock
£224.75
Archived Product
-
Durable frameless high
speed motor delivers up
to 130 nm of max torque.
All metal gearing for
efficient power
transmission and long
tool life
aluminium front housing
provides greater heat
dispersion increasing
motor life
improved variable speed
switch and electronic
motor brake for complete
control for both setting
and removing fasteners
6.35 mm keyless hex-drive
allows for quick and easy
bit changes
compact body enable use
in tight spaces
rubber coated grip and
rear of the tool to
reduce surface vibration
and user fatigue
led light for improved
visibility of fastener
applications
variety of small
fastenings in wood and
metal
iron mongery, hardware
fixtures, variety of
repair applications
assembling ducts, air
conditioning and central
heating systems
fastening sandwich panels
to the building or roof
structure
fastening extruded metal
sheet to metal frames for
roofing
fastening rafters
fixing laps of roofing or
cladding sheets and
flashings
fastening wooden forms
for making concrete
constructions
specifications
voltage 12v v
battery capacity nimh 2.6
ah
bit holder 1/4in
power output 220 watts
no load speed 0-2400 rpm
impacts per minute 0-2700
ipm
max torque 130 nm
max. bolt diameter m12
weight 1.7kg
length 146 mm
height 231 mm
standard equipment
30 minute charger
2 batteries
heavy-duty carrying
case.
Availability: In Stock
£152.85
Archived Product
-
Bosch psb 24v cordless
heavy duty combi hammer
drill plus 2 batteries.
Features: high-torque 48
mm motor. powerful 24 v
quick-change battery pack
with voltage coding.
bosch electronic setting
ring with torque
preselection, plus drill
setting, plus impact
drill setting keyless
chuck, hammer-resistant.
bosch auto lock.
high-performance 5
planetary gears
(2-speed). impact
mechanism with optimised
efficiency. run-out
brake. right-left
operation. switch-on
lock. double aero
softgrip. Slim,
ergonomic centre grip for
optimum centre of
gravity. practical
magnetic plate for
screws, bits, etc.
screwdriver bit storage
on housing. 1-hour quick
charger with intelligent
’battery full’
detection. comes
with: 1-hour quick
charger. 2 batteries.
auxiliary handle. plastic
carrying case.
specifications:
charging time: 1 h torque
settings: 5 torque
setting range, min. /
max.: / 25 nm. weight
including battery: 2,
60kg max. torque for hard
screwdriving
applications: 25, 0 nm
idle speed, 1st gear:
500 / 1.800 1 /min screw
diameter: 8 drilling
screws, max. diameter:
30 mm. This product comes
with a 2 year
manufacturers warranty.
image 2: torque
preselection plus drill
settings. image 3:
2-speed gears. image
4: quick-change
battery pack.
Availability: In Stock
£144.95
Archived Product
-
Powerful 28 volt
combination tool for
heavy-duty hammerdrilling
and screwdriving
applications . Three
speed settings for
optimum performance in
high torque, normal use
and high speed
applications
22 position adjustable
torque control for
uniform results and
optimised precision when
screwdriving
13 mm all metal
self-tightening keyless
chuck tightens throughout
operation providing
superior bit gripping
strength
ergonomically designed
trigger and anti-slip
comfort grip provides
increased comfort and
control
electronic brake for
added control
high performance fan
cooled motor for maximum
power and durability
all metal gearing for
efficient power
transmission and longer
tool life
enhanced durability and
reliability to withstand
the job-site environment
and the most demanding
applications
exclusive nano phosphate
li-ion battery pack
provides 2000 charge
cycles, more than double
that of nicd/nimh packs
battery pack produces 28
volt power at equivalent
weight to 14.4 volt
nicd/nimh pack weight
applications
furniture manufacture and
assembly, screwdriving
and drilling of holes in
hardwood.
installing light and
socket fixtures, hanging
of signs etc.. drilling
into masonry
drilling of ferrous and
non ferrous metals.
assembly and hanging of
cabinets.
assembling ducts,
central heating and air
conditioning.
hardware fixtures,
variety of repair
applications.
hardware fixtures,
fastening of hanging
pipes and drilling into
masonry.
fixing of steel cladding
on commercial buildings
and drilling into
masonry.
installation of wood/pvc
frames. drilling into
masonry and screwdriving
applications.
specifications
voltage : 28 v
battery capacity
: li-ion 2.2 ah
chuck capacity: 1.5-13 mm
power output: 650 watts
no load speed: 0-400 /
0-1200 / 0-1600 rpm
beats per minute: 0-6800
/ 0-20400 / 0-27200 bpm
max torque: 42 nm
max. drilling capacity
wood 65 mm
metal 13 mm
masonry 16 mm
weight 2.8kg
length 267 mm
height 260 mm
.
Availability: In Stock
£445.85
Archived Product
-
Powerful fan cooled motor
delivers up to 440 nm of
sustained torque and up
to 2500 impacts per
minute for heavy-duty
fastening applications .
All metal gearing for
efficient power
transmission and long
tool life
aluminium front housing
for better weight and
balance
modular component design
for easy access and fast
service
rocker switch for fast
and easy forward and
reverse selection
1/2 (13mm) square drive
allows for quick and easy
bit changes
rubber coated grip to
reduce surface vibration
and user fatigue
exclusive nano phosphate
li-ion battery pack
provides 2000 charge
cycles, more than double
that of nicd/nimh packs
nano pack produces 36v
power at equivalent
weight to 18v nicd/nimh
pack weight
applications
fastening small metal
constructions
fastening wheels, panels
and other vehicle
components
anchoring of support
jacks, angles, brackets
in concrete, solid brick
etc
tightening together
rafters
fastening roof sheeting
to metal girders
fastening pipes and rails
to walls
fastening wood forms for
making concrete
constructions
fastening extruded metal
sheet to metal frames for
roofing
fastening sandwich panels
to the building or roof
structure
includes: 1 hour charger,
2 batteries, heavy-duty
carrying case
specifications
voltage: 36 v
bit holder: 1/2in
battery: li-ion 2.2 ah
power output: 800 watts
no load speed: 1400 rpm
impacts per minute: 2500
ipm
max. sustained torque:
440 nm
max. bolt diameter: m20
weight: 3.4 kg
.
Availability: In Stock
£568.35
Archived Product
-
Effortlessly cuts
flexible materials up to
6 mm thick such as
decoration materials,
cardboard or carpet.
Autosharp – the
self-sharpening cutting
blade makes blade changes
a thing of the past and
offers continuously good
cutting performance. No
memory effect, no
self-discharge: always
ready for use thanks to
lithium-ion technology.
features: charge
level indicator by means
of led. lock-on switch.
ergonomic tool design
with softgrip.
technical data:
max. cutting strength 6
mm. no-load speed 240
rpm. battery voltage 3,
6 v. charging time 5 h.
cutting performance per
battery charge, to 150
m. machine weight with
battery 0, 40 kg.
Availability: In Stock
£37.95
Archived Product
-
High torque and a
powerful motor in one!
powerful 18 volt impact
driver with lithium-ion
batteries which feature a
high energy density
technology that will
deliver nearly 300% more
working capacity during
the lifetime of the
battery when compared to
traditional ni-cad
batteries. At the same
time the substantial
weight saving provides
increased operator
comfort and safety.
Machine screws: m4-m8
standard bolt: m5-m14
coarse thread (length):
22mm-125mm. High tensile
bolt: m5-m12. Max.
Torque: 145nm. No load
speed: 0-2, 300. Impacts
per minute: 3, 200. Net
weight: 1.5kg. Battery:
li-ion.
Availability: In Stock
£346.95
Archived Product
-
Compact and light -
weighs only 1.4kg and
overall length is 146mm
(less than 6").
Incredibly light -
perfectly balanced and
delivers 140nm of
fastening torque. Weights
only 1.4kg
phosphorescent bumper.
led job light. battery
description: 2 x
3.0ah li-ion lithium-ion
batteries provide
high-energy capacity and
accept more repeat
charges giving a real
“long-life” service.
standard
equipment: fast
charger, battery
cartridges, phillips
bit, belt clip, case.
Availability: In Stock
£339.99
Available
-
Dewalt professional
single speed impact drill
with the following
features. Powerful for
heavy-duty applications
soft grip to enhance user
comfort
jampot construction
design for added
durability and ease of
service
variable speed control
with forward and reverse
mode to suit different
materials
dust sealed switch for
added durabilty
high quality 13 mm
keyless chuck for
accuracy and durability
applications
drilling in concrete,
masonary, steel, wood
fixings
specification
chuck capacity 13mm
power input 701 watt
power output 701 watt
maximum torque 12nm
no load speed 0-2600 rpm
drilling capacity
wood 30mm
steel 13mm
concrete 16mm
spindle thread 1/2 x 20
unf
standard equipment :
side handle, depth stop,
carry case
specification
chuck capacity 13mm
power input 701 watt
power output 701 watt
maximum torque 12nm
no load speed 0-2600 rpm
drilling capacity
wood 30mm
steel 13mm
concrete 16mm
spindle thread 1/2 x 20
unf
standard equipment
side handle
depth stop
carry
case.
Availability: In Stock
£93.05
Archived Product
-
The tool works as fast as
you do with consistent
nail penetration. -
sequential operating mode
allows for precision
placement and the bump
operating mode provides
the user with production
speed
- headlights provide
increased visibility in
low-light conditions or
confined areas without
any light
- depths can be easily
referenced utilizing
numbered dial and user
does not sacrifice
performance when changing
depths
- user can engage contact
trip lock-off and prevent
accidental dis-charge of
fastener
- provides increased
durability over current
cordless nailers and
provides easy access for
troubleshooting and
service on the job-site
or by a service
technician
- provides easy access to
the nosepiece for the
simple removal of a
jammed fastener without
the use of screwdrivers
or tool wrenches
- versatility in the
loading and unloading of
fasteners - straight
magazine 110 nail
capacity
- provides increased
portability and
versatility on the
job-site
- increased visibility
and durability along with
protection for
work-surface from the
contact-trip
- will accept paslode
straight nails
- top cap is impact
resistant and easy to
remove for
troubleshooting
applications: for new
construction and
remodeling applications,
door and window trim,
paneling, baseboard,
casing, cabinetry,
crown molding, door
jambs, cap and shoe
molding
specifications
nail diameter : 1.6 mm
battery 2.6 nimh ah
magazine angle : 0 â°
nail length: 32-63 mm
magazine capacity : 110
nails
magazine loading: rear
load
firing mode: bump &
sequential
length 330 mm
width 105 mm
height 320 mm standard
equipment: 30 min
charger, 2 x nimh
2.6ah batteries, dewalt
safety glasses,
reversible belt hook, no
mark tip, heavy-duty
carry
case.
Availability: In Stock
£460.55
Archived Product
-
- ideal for drilling
anchors and fixing holes
into concrete, brick and
masonry from 4mm to 22mm.
- large 19mm optimised
hammer mechanism delivers
corded drilling
performance
- efficient and compact
gearbox for longer
runtime and lighter
weight
- extremely compact
design and rear mounted
battery for excellent
balance and optimum
comfort
- internal mechanism
connected to external
housings via spring
dampeners meaning
significantly lower
vibration, reduced user
fatigue allowing longer
operating periods
- air cooled batteries
supplied as standard
improving runtime when
batteries charged hot and
extending battery life
- impact-stop mode for
rotary drilling only in
wood, ceramic, steel
- rotation stop for light
chiselling applications
in plaster, tiles and
render
- electronic motor brake
for additional control
- spring loaded battery
latch system and
guiderail for quick
change and and secure
battery fitment
- modular component
design for trouble free
servicing
- rubber coated grip to
reduce surface vibration
and user fatigue
specifications
voltage: 24 v
battery: 2.0 ah
power output: 300 watts
no load speed: 1100 rpm
impact energy: 2.1 j
blows per minute: 0-4200
bpm
tool holder: sds-plus
max. drilling capacity
[wood]: 30 mm
max. drilling capacity
[metal]: 13 mm
max. drilling capacity
[concrete]: 22 mm
weight: 3.8 kg
length: 290 mm
height: 240 mm
hand/arm vibration 9.0
m/s2
uncertainty k 1
(vibration) 1.5
m/sã‚â²
hand/arm vibration -
chisel 6.5 m/sã‚â²
uncertainty k 2
(vibration) 1.5
m/sã‚â²
hand/arm vibration -
metal 2.5 m/sã‚â²
uncertainty k 3
(vibration) 1.5
m/sã‚â²
sound pressure 83.7 db(a)
uncertainty k 1 (sound)
1.9 db(a)
accoustic pressure 97
db(a)
uncertainty k 2 (sound)
1.9 db(a)
includes: 1 hour charger,
2 x 2.0ah nicd aircooled
batteries,
multi-position side
handle, grease tube,
heavy-duty carrying
case.
Availability: In Stock
£431.15
Archived Product
-
Powerful 36 volt
combination tool for
heavy-duty hammerdrilling
and screwdriving
applications . Three
speed settings for
optimum performance in
high torque, normal use
and high speed
applications
22 position adjustable
torque control for
uniform results and
optimised precision when
screwdriving
13 mm all metal
self-tightening keyless
chuck tightens throughout
operation providing
superior bit gripping
strength
ergonomically designed
trigger and anti-slip
comfort grip provides
increased comfort and
control
electronic brake for
added control
high performance fan
cooled motor for maximum
power and durability
all metal gearing for
efficient power
transmission and longer
tool life
enhanced durability and
reliability to withstand
the job-site environment
and the most demanding
applications
exclusive nano phosphate
li-ion battery pack
provides 2000 charge
cycles, more than double
that of nicd/nimh packs
battery pack produces 36
volt power at equivalent
weight to 18 volt
nicd/nimh pack weight
applications
furniture manufacture and
assembly, screwdriving
and drilling of holes in
hardwood.
installing light and
socket fixtures, hanging
of signs etc.. drilling
into masonry
drilling of ferrous and
non ferrous metals.
assembly and hanging of
cabinets.
assembling ducts,
central heating and air
conditioning.
hardware fixtures,
variety of repair
applications.
hardware fixtures,
fastening of hanging
pipes and drilling into
masonry.
fixing of steel cladding
on commercial buildings
and drilling into
masonry.
installation of wood/pvc
frames. drilling into
masonry and screwdriving
applications.
voltage: 36 volt
battery: 2 x 2.2ah
lithium-ion
chuck capacity: 13mm
torque control: 22 stage
no load speed:
0-400/0-1200/0-1600
drilling capacity:
masonry: 16mm
steel: 13mm
wood: 50mm
.
Availability: In Stock
£492.89
Archived Product
-
- ideal for drilling
anchors and fixing holes
into concrete, brick and
masonry from 4mm to 22mm.
- large 19mm optimised
hammer mechanism delivers
corded drilling
performance
- efficient and compact
gearbox for longer
runtime and lighter
weight
- extremely compact
design and rear mounted
battery for excellent
balance and optimum
comfort
- internal mechanism
connected to external
housings via spring
dampeners meaning
significantly lower
vibration, reduced user
fatigue allowing longer
operating periods
- air cooled batteries
supplied as standard
improving runtime when
batteries charged hot and
extending battery life
- impact-stop mode for
rotary drilling only in
wood, ceramic, steel
- rotation stop for light
chiselling applications
in plaster, tiles and
render
- electronic motor brake
for additional control
- quick release sds
toolholder and 3 jaw
chuck supplied for easy
switching between
hammer/rotary hammer and
rotary only applications
- spring loaded battery
latch system and
guiderail for quick
change and and secure
battery fitment
- modular component
design for trouble free
servicing
- rubber coated grip to
reduce surface vibration
and user fatigue
includes: 1 hour charger,
2 x 2.0ah nicd aircooled
batteries,
multi-position side
handle, 13mm diameter 3
jaw keyless quick change
chuck, grease tube,
heavy-duty carrying case
specifications
voltage: 24 v
battery: 2.0 ah
power output: 300 watts
no load speed: 1100 rpm
impact energy: 2.1 j
blows per minute: 0-4200
bpm
tool holder: sds-plus
max. drilling capacity
[wood]: 30 mm
max. drilling capacity
[metal]: 13 mm
max. drilling capacity
[concrete]: 22 mm
weight: 4.0 kg
length: 310 mm
height: 240 mm
hand/arm vibration9.0m/s2
uncertainty k 1
(vibration)1.5m/sâ²
hand/arm vibration -
chisel6.5m/sâ²
uncertainty k 2
(vibration)1.5m/sâ²
hand/arm vibration -
metal2.5m/sâ²
uncertainty k 3
(vibration)1.5m/sâ²
sound pressure84db(a)
uncertainty k 1
(sound)2.4db(a)
accoustic pressure98db(a)
uncertainty k 2
(sound)2.4db(a).
Availability: In Stock
£467.40
Archived Product
-
Battery description:
2 x
1.3ah ni-cad. Technical
data: max in steel: 10mm.
max in wood: 21mm.
torque settings s/h nm:
16 plus drill. max
torque: 14/24nm. max.
size wood screw: no. 10.
no load speed: h:
0-1300 l: 0-400.
charging time: 30
minutes. net weight:
1.5kgs. Features 2
mechanical gears.
electric brake. forward /
reverse rotation.
variable speed trigger.
Availability: In Stock
£83.95
Archived Product
-
Bosch psb 24v cordless
heavy duty combi hammer
drill. Features:
high-torque 48 mm motor.
powerful 24 v
quick-change battery pack
with voltage coding.
bosch electronic setting
ring with torque
preselection, plus drill
setting, plus impact
drill setting keyless
chuck, hammer-resistant.
bosch auto lock.
high-performance 5
planetary gears
(2-speed). impact
mechanism with optimised
efficiency. run-out
brake. right-left
operation. switch-on
lock. double aero
softgrip. Slim,
ergonomic centre grip for
optimum centre of
gravity. practical
magnetic plate for
screws, bits, etc.
screwdriver bit storage
on housing. 1-hour quick
charger with intelligent
’battery full’
detection. comes
with: 1-hour quick
charger. 1 battery pack
auxiliary handle.
plastic carrying case.
specifications:
charging time: 1 h torque
settings: 5 torque
setting range, min. /
max.: / 25 nm. weight
including battery: 2,
60kg max. torque for hard
screwdriving
applications: 25, 0 nm
idle speed, 1st gear:
500 / 1.800 1 /min screw
diameter: 8 drilling
screws, max. diameter:
30 mm. This product comes
with a 2 year
manufacturers warranty.
image 2: torque
preselection plus drill
settings. image
3: 2-speed gears.
image 4:
quick-change battery
pack.
Availability: In Stock
£139.95
Archived Product
-
The dewalt family of
cordless tools are
combined together for
convenience and value in
the dewalt combopacks.
The combopacks are
offered in a variety of
voltage platforms and are
available in a choice of
different configurations
which include cordless
hammerdrill/drivers,
cordless circular saws,
cordless reciprocating
saws, cordless jigsaws,
cordless plunge saws and
cordless flashlights.
the convenience of
maintaining one kit box
for your cordless power
tools, coupled with the
value savings realised by
purchasing your dewalt
cordless products in a
combopack configuration,
is what makes the dewalt
family of cordless combo
packs an innovative
product for the
professional tradesperson
who demands the
convenience and
versatility of cordless.
heavy-duty 28 volt
cordless kit with nano
technology
dewaltâ® exclusive
nanot-phosphate lithium
ion cells offer long
battery life &
durability: 2, 000
recharges
kit includes:
- dc910 28v combi drill
- dc318 28v jigsaw
- dc310 28v circular saw
- dc519 28v flexible
floodlight
- 2 x dc9280 28v li-ion
batteries
- 1 x dc9000 28v
intelligent 1-hour
charger
- heavy-duty kit
box.
Availability: In Stock
£942.75
Archived Product
-
Professional 36 volt
cordless drill with the
following features. -
ideal for drilling
anchors and fixing holes
into concrete, brick and
masonry from 4 mm to 24
mm
- new 36 volt liion
technology delivers
significantly improved
user flexibility through
70% more runtime compared
with 24 volt, over
double battery life and
80% full charge within 30
minutes charging
- large 19 mm optimised
hammer mechanism delivers
corded drilling
performance
- efficient and compact
gearbox for longer
runtime and lighter
weight
- extremely compact
design and rear mounted
battery for excellent
balance and optimum
comfort
- internal mechanism
connected to external
housings via spring
dampeners meaning
significantly lower
vibration, reduced user
fatigue allowing longer
operating periods
- impact-stop mode for
rotary drilling only in
wood, ceramic, steel
- rotation stop for
light chiselling
applications in plaster,
tiles and render
- electronic motor brake
for additional control
- quick release sds
toolholder and 3 jaw
chuck supplied for easy
switching between
hammer/rotary hammer and
rotary only applications
- spring loaded battery
latch system and
guiderail for quick
change and and secure
battery fitment
- modular component
design for trouble free
servicing
- rubber coated grip to
reduce surface vibration
and user fatigue
includes :1 hour charger,
2 batteries,
multi-position side
handle, 13 mm diameter 3
jaw keyless quick change
chuck, grease,
heavy-duty carrying case
specifications
voltage: 36 v
battery: li-ion 2.2 ah
power output: 450 watts
no load speed: 1150 rpm
impact energy: 2.5 j
blows per minute: 0-4300
bpm
tool holder: sds-plus
max. drilling capacity
[wood]: 30 mm
max. drilling capacity
[metal]: 13 mm
max. drilling capacity
[concrete]: 26 mm
weight: 3.8
kg.
Availability: In Stock
£593.85
Archived Product
-
The tool works as fast as
you do with consistent
nail penetration. -
sequential operating mode
allows for precision
placement and the bump
operating mode provides
the user with production
speed
- headlights provide
increased visibility in
low-light conditions or
confined areas without
any light
- depths can be easily
referenced utilising
numbered dial and user
does not sacrifice
performance when changing
depths
- user can engage contact
trip lock-off and prevent
accidental dis-charge of
fastener
- provides increased
durability over current
cordless nailers and
provides easy access for
troubleshooting and
service on the job-site
or by a service
technician
- provides easy access to
the nosepiece for the
simple removal of a
jammed fastener without
the use of screwdrivers
or tool wrenches
- versatility in the
loading and unloading of
fasteners - 20 degree
angled magazine 120 nail
capacity
- provides increased
portability and
versatility on the
job-site
- increased visibility
and durability along with
protection for
work-surface from the
contact-trip
- will accept paslode
20-degree nails
- top cap is impact
resistant and easy to
remove for
troubleshooting
applications : for new
construction and
remodeling applications,
door and window trim,
paneling, baseboard,
casing, cabinetry,
crown molding, door
jambs, cap and shoe
molding
nail diameter: 1.6mm
magazine angle: 20â°
nail length: 32-63mm
magazine capacity: up to
120 nails
magazine loading: rear -
load
air consumption per shot
@6.9 bar
firing mode: bump &
sequential
length: 330mm
width: 105mm
height: 320mm
weight: 3.9kg
voltage: 18 volt
standard equipment: 30
minute charger, 3 x
2.4ah nimh batteries,
dewalt safety glasses,
reversible belt hook,
no-mark tip, heavy-duty
carrying
case.
Availability: In Stock
£482.15
Archived Product
-
This cordless impact
drill has a 13mm keyless
chuck and electronic
speed control and the
following features. -
23-step torque selector
- led light
- bit holder on the
unit
- right/left turn
- 2-settings gear
- battery capacity
indicator
voltage: 24 volt
idling speed
:0-350/0-1100 rpm
torque settings: 21 +1+1
charging time :approx. 1
hours
battery type :nicd
weight: 2.4
kg.
Availability: In Stock
£73.49
Archived Product
-
12v cordless lithium-ion
- slim,
compact
die grinder with 1hr
mains charger & battery.
Availability: In Stock
£105.85
Available
-
Dewalt professional
single speed impact drill
with the following
features. Powerful for
heavy-duty applications
soft grip to enhance user
comfort
jampot construction
design for added
durability and ease of
service
variable speed control
with forward and reverse
mode to suit different
materials
dust sealed switch for
added durabilty
high quality 13 mm
keyless chuck for
accuracy and durability
applications
drilling in concrete,
masonary, steel, wood
fixings
specification
chuck capacity 13mm
power input 701 watt
power output 701 watt
maximum torque 12nm
no load speed 0-2600 rpm
drilling capacity
wood 30mm
steel 13mm
concrete 16mm
spindle thread 1/2 x 20
unf
standard equipment :
side handle, depth stop,
carry case
.
Availability: In Stock
£93.05
Archived Product
-
12v cordless lithium-ion
- slim,
reciprocating saw with
1hr mains charger &
battery.
Availability: In Stock
£125.09
Archived Product
-
Dewalt professional
impact wrench with the
following features. 3/4in
drive impact wrench which
is compact and
lightweight, delivering
enough torque for
fastening bolts up to
m20. ideal for user
looking for a more
durable handle.
a massive 440nm torque
due to the larger impact
mechanism higher
springrate to increase
fastening speed. slide
switch with forward and
reverse provides ease of
use, and better control.
soft grip handle to
reduce vibration and
deliver more user comfort
and improved balance.
specifications
max torque: 440 nm
power input: 710 watts
power output: 370 watts
no load speed: 2200 rpm
impacts per minute: 2700
ipm
max. bolt diameter: m20
bit holder: 3/4 in
weight: 3.2 kg
length: 292 mm
height: 216 mm
.
Availability: In Stock
£244.45
Archived Product
-
Variable speed impact
drill, keyless chuck,
reverse facility, soft
grip handle with 790w
motor. two speed, chuck
capacity 13mm. Power
input: 790w
no-load speed:
0-1000/3000/min
full-load impact rate:
0-13000/39000/min
capacity
brick :20mm
steel :13mm
wood :40mm
chuck: 13mm keyless
overall length: 333mm
weight: 2.2kg
standard accessories
:side handle, depth
stop, carrying case
.
Availability: In Stock
£139.10
Archived Product
-
The hitachi wh12dmr
features a very modern
design, high performance
rare earth motor, ultra
compact body and slip
resistant soft-grip
handle. the case includes
integral bit storage and
an adjustable hook with a
built-in spotlight.
supplied with a one-hour
charger, two batteries
and a carry case. This
high powered driver is
designed for heavy-duty
fixing and is ideally
suited for long
screws/bolts or when
extra torque is required.
specifications:
voltage: 12 volt
bit holder: 1/4in hex
battery: 2 x 2.0ah nicd
no load speed rpm: 0-2600
impacts per minute:
0-3200
tightening torque: 130nm
capacity in screw :m4-m8
capacity in bolt :m5-m12
capacity in ht bolt
:m5-m1
weight:
1.6kg.
Availability: In Stock
£229.29
Archived Product
-
- ideal for drilling
anchors and fixing holes
into concrete, brick and
masonry from 4mm to 22mm.
- large 19mm optimised
hammer mechanism delivers
corded drilling
performance
- efficient and compact
gearbox for longer
runtime and lighter
weight
- extremely compact
design and rear mounted
battery for excellent
balance and optimum
comfort
- internal mechanism
connected to external
housings via spring
dampeners meaning
significantly lower
vibration, reduced user
fatigue allowing longer
operating periods
- air cooled batteries
supplied as standard
improving runtime when
batteries charged hot and
extending battery life
- impact-stop mode for
rotary drilling only in
wood, ceramic, steel
- rotation stop for light
chiselling applications
in plaster, tiles and
render
- electronic motor brake
for additional control
- spring loaded battery
latch system and
guiderail for quick
change and and secure
battery fitment
- modular component
design for trouble free
servicing
- rubber coated grip to
reduce surface vibration
and user fatigue
specifications
voltage: 24 v
battery: 2.0 ah
power output: 300 watts
no load speed: 1100 rpm
impact energy: 2.1 j
blows per minute: 0-4200
bpm
tool holder: sds-plus
max. drilling capacity
[wood]: 30 mm
max. drilling capacity
[metal]: 13 mm
max. drilling capacity
[concrete]: 22 mm
weight: 3.8 kg
length: 290 mm
height: 240 mm
hand/arm vibration 9.0
m/s2
uncertainty k 1
(vibration) 1.5
m/sã‚â²
hand/arm vibration -
chisel 6.5 m/sã‚â²
uncertainty k 2
(vibration) 1.5
m/sã‚â²
hand/arm vibration -
metal 2.5 m/sã‚â²
uncertainty k 3
(vibration) 1.5
m/sã‚â²
sound pressure 83.7 db(a)
uncertainty k 1 (sound)
1.9 db(a)
accoustic pressure 97
db(a)
uncertainty k 2 (sound)
1.9 db(a)
includes: 1 hour charger,
2 x 2.0ah nicd aircooled
batteries,
multi-position side
handle, grease tube,
heavy-duty carrying
case.
Availability: In Stock
£477.25
Archived Product
-
18v cordless hammer
- superbly
balanced tool, intended
for
drill/driver - 1hr
charge.
Availability: In Stock
£57.55
Archived Product
-
Features: higher torque
and faster speed
increased productivity.
robust design for
increased durability.
440nm of deliverable
torque in forward and
reverse. soft grip handle
to reduce vibrations and
to enhance user comfort.
Specifications: power
input 710 watts. Power
output 370 watts. No load
speed 2200 rpm. Impacts
per minute 2700 ipm. Bit
holder 1/2 ". Weight 3.2
kg. Length 292 mm. Height
216 mm. Max bolt diameter
m20. standard 1/2 inch
ring retainer.
Availability: In Stock
£229.95
Archived Product
-
Dc727 18v compact
hammerdrill / driver. -
powerful 18 volt
combination tool for
hammerdrilling and
screwdriving applications
- compact, lightweight
design
- 17 position adjustable
torque control for
consistent screwdriving
into a variety of
materials with different
screw sizes
- two speed settings,
variable speed and
reverse switch for
controllable use
- 13 mm single sleeve
keyless chuck with
automatic spindle lock
for quick and easy bit
change with one hand
- electronic motor brake
for added control
- high performance fan
cooled motor for maximum
power and durability
- all metal gearing for
efficient power
transmission and longer
tool life
- led light for improved
visibilty
- compatible with all
dewalt 18 volt battery
packs
specifications
voltage 18 v
chuck capacity 1.5-13 mm
power output 375 watts
no load speed 0-500 /
0-1700 rpm
beats per minute 0-8500/
0-29000 bpm
max torque 41 nm
max. drilling capacity
[wood] 38 mm
max. drilling capacity
[metal] 13 mm
max. drilling capacity
[masonry] 13 mm
dc827 18v impact driver
-durable frameless high
speed motor delivers up
to 150 nm of torque
-all metal gearing for
efficient power
transmission and long
tool life
-improved variable speed
switch and electronic
motor brake for complete
control for both setting
and removing fasteners
-6.35 mm keyless
hex-drive allows for
quick and easy bit
changes
-rubber coated grip and
rear of the tool to
reduce surface vibration
and user fatigue
-led light to improve
visibility of fastener
-compatible with all
dewalt 18 volt battery
packs
2 x 18v 2.0ah lithium
batteries
1 x 40 minute charger
1 x heavy-duty
kitbox.
Availability: In Stock
£382.15
Archived Product
-
14.4v 3/8” square drive
- powerful,
compact
cordless
cordless impact wrench
150lb.ft.
Availability: In Stock
£178.39
Archived Product
-
18v 1/2"sq drive cordless
- produces torque
in excess of 407nm
(300lb.ft) - enough to
remove wheel nuts. - forward,
reverse and trigger lock
control. - soft
grip handle for added
comfort and
control. - powered
by lithium-ion battery,
which maintains a high
energy density level with
a flat discharge curve -
performing better and
longer than a
conventional ni-cd/ni-mh
battery. - no
memory effect allows the
battery to recover from a
deep discharge with no
tendency to reduce
overall
capacity. - supplied
with 1 hour mains charger
and
battery.
lithium-ion impact wrench
300lb.ft with 1hr mains
charger & battery.
•
powerful cordless impact
wrench with forward,
reverse and trigger lock
control.
• produces
torque in excess of 407nm
(300lb.ft) - enough to
remove wheel nuts.
•
soft grip handle for
added comfort and
control.
• powered by
lithium-ion battery,
which maintains a high
energy density level with
a flat discharge curve -
performing better and
longer than a
conventional ni-cd/ni-mh
battery.
• no memory
effect allows the battery
to recover from a deep
discharge with no
tendency to reduce
overall capacity.
•
supplied with 1 hour
mains charger and
battery.
weight: 0
kg
warranty: 1
year
Availability: In Stock
£269.55
Archived Product
-
The draper 44448 has the
following features.
• expert
quality
• variable
Availability: In Stock
£173.65
Archived Product
-
High spec impact drivers
with all new lithium ion
batteries. High maximum
torque of 140nm
save
Availability: In Stock
£275.35
Archived Product
-
19.2v 1/2” square drive
- compact and
powerful
super torque cordless
impact wrench 285lb.ft.
Availability: In Stock
£297.35
Archived Product
-
12v cordless
- electronic
variable speed control,
forward and
reverse. - 15
drill/driver.
Availability: In Stock
£51.19
Archived Product
-
Expert quality.
environmentally-friendly.
ni-mh batteries with
higher energy discharge
(2.3ah) variable speed.
rotary function. hammer
function. chisel
function. safety clutch.
forward/reverse facility.
adjustable side handle
and depth rod. soft grip
handle and trigger.
Supplied complete with:
three sds drills, sds
chuck adaptor, 13mm
geared chuck, carrying
case, two 24v 2.3ah
ni-mh battery packs,
230v ac universal one
hour fast charger with bs
3 pin plug.
specification:
batteries.. . 2 x 2.3ah
ni-mh drilling
capacities: mild steel.
.. 10mm. wood.. .
20mm. masonry.. .
20mm. speed (no load).
.. 0-900r/min. blows per
minute.. . 4750 max.
chuck capacity.. .
13mm. spindle thread.
.. 1/2" x 20unf. weight
(inc. battery pack).. .
4.1kg.
Availability: In Stock
£206.35
Archived Product
-
High torque impact wrench
the most powerful in its
class at 360nm (266ft
lbs). Soft grip handle
for greater comfort and
control.
innovative body design.
3/4in square drive.
standard accessories
side handle.
carry case
specifications
power input: 850watt
no load speed: 1900/min
impact rate: 2100/min
capacity: standard bolt
m12 - m22
high tensile bolt m12 -
m16
weight: 2.8kg
voltage
110v.
Availability: In Stock
£444.89
Archived Product
-
High torque impact wrench
the most powerful in its
class at 360nm (266ft
lbs). Soft grip handle
for greater comfort and
control.
innovative body design.
1/2in square drive.
standard accessories
side handle.
carry case
specifications
power input: 480watt
no load speed: 1900/min
impact rate: 2100/min
capacity: standard bolt
m12 - m22
high tensile bolt m12 -
m16
weight: 2.8kg
voltage
110v.
Availability: In Stock
£319.45
Archived Product
-
High maximum torque of
150nm. Save power mode
reduces power to 55%
torque level
maintained
Availability: In Stock
£355.69
Archived Product
-
Compact, light and well
balanced. Magnesium die
cast base for durability
165 mm blade on
Availability: In Stock
£125.55
Archived Product
-
Compact impact driver.
Maximum tightening torque
of 105nm
forward & reverse switch
Availability: In Stock
£184.19
Archived Product
-
19.2v 1/2” square drive
- powerful,
compact
cordless
cordless impact wrench
200lb.ft.
Availability: In Stock
£199.69
Archived Product
-
Dewalt professional
impact wrench with the
following features. 3/4in
drive impact wrench which
is compact and
lightweight, delivering
enough torque for
fastening bolts up to
m20. ideal for user
looking for a more
durable handle.
a massive 440nm torque
due to the larger impact
mechanism higher
springrate to increase
fastening speed. slide
switch with forward and
reverse provides ease of
use, and better control.
soft grip handle to
reduce vibration and
deliver more user comfort
and improved balance.
specifications
max torque: 440 nm
power input: 710 watts
power output: 370 watts
no load speed: 2200 rpm
impacts per minute: 2700
ipm
max. bolt diameter: m20
bit holder: 3/4 in
weight: 3.2 kg
length: 292 mm
height: 216 mm
.
Availability: In Stock
£244.45
Archived Product
-
115mm 18v cordless
- features
lithium-ion angle grinder
with 1hr mains charger &
battery.
Availability: In Stock
£216.59
Archived Product
-
The latest lithium-ion
battery technology for
full power with less
weight. No memory effect,
no self-discharge:
always ready for use
thanks to lithium-ion
technology. power control
electronic torque
adjustment with 10 torque
settings plus a drill
setting – optimum power
for every application.
Forward/reverse indicator
and 3-stage charge level
indicator with led.
features: bosch
electronic speed control:
"accelerate" from 0 –
max. using the trigger
switch. powerlight –
thanks to the built-in
led, your workpiece is
always well lit and
clearly visible. softgrip
for a better and more
comfortable hold optimum
storage in the charging
station. innovative 1/4"
internal hexagon shank
for fast bit changes.
technical data:
no-load speed 0 – 400
rpm. max. torque for
soft/hard screwdriving
applications 7 / 25 nm.
torque settings 10 plus
1 battery voltage 10, 8
v. chucks 1/4" with
internal hexagon shank.
machine weight with
battery 0, 80 kg. screw
diameter. screw diameter
up to 6 mm. drilling
diameter. drill diameter
in wood 10 mm.
functions: bosch
electronic. drilling
screws. forward/reverse
operation. power control.
softgrip. integrated work
light (powerlight).
charge level indicator.
forward/reverse
indicator. image
2: 1/4" internal
hexagon shank. image
3: battery charge
level indicator and
torque setting image
4: charging station.
Availability: In Stock
£71.95
Archived Product
-
115mm 18v cordless
- cordless
lithium-ion angle grinder
with 1hr mains charger &
battery.
Availability: In Stock
£206.95
Archived Product
-
12 volt(1.2ah) li-ion
battery - lightweight to
ensure maximum control.
12 voltli-ion charger -
45-minute charge time
soft-grip overmould for
improved grip and reduced
vibration
spindle lock for easy
blade change
blade diameter: 86mm
bore size: 15mm
no load speed: 0-2,
000rpm
max cutting capacities:
at 90â°- 24mm
at 45â°- 17.5mm
weight: 1.74kg
included as standard:
1x (1.2ah) li-ion
battery, 45-minute
charger, 20 tooth tct
blade, allen key and
toolbag.
Availability: In Stock
£100.15
Archived Product
-
18v cordless
- electronic
variable speed control,
forward and
reverse. - 15
drill/driver.
Availability: In Stock
£59.45
Archived Product
-
24v super torque cordless
- extra
powerful
hammer drill/driver 1hr
charge - 2 batteries.
Availability: In Stock
£164.45
Archived Product
-
Dewalt professional
impact wrench with the
following features. 440nm
of deliverable torque in
forward and reverse
higher torque and faster
speed increased
productivity
soft grip handle to
reduce vibrations and to
enhance user comfort
robust design for
increased durability
includes :1/2 inch ring
retainer
specifications
max torque: 440 nm
power input: 710 watts
power output: 370 watts
no load speed: 2200 rpm
impacts per minute: 2700
ipm
max. bolt diameter: m20
bit holder: 1/2in
weight: 3.2 kg
length: 292 mm
height: 216 mm
.
Availability: In Stock
£225.85
Archived Product
-
Features:
expert
quality. compact
hi-torque motor (176nm
max.). variable speed
control. external
changeable carbon
brushes. electric
brake. forward/reverse
facility. battery level
indicator. soft grip
handle and trigger.
supplied complete
with: carrying case,
2 x 14.4v 1.7ah battery
packs, 230v ac 1 hour
fast charger with bs 3
pin plug.
specification:
maximum torque: 176nm
impacts per minute: 3000
max. speed (no load):
0-2300r/min weight (inc.
battery pack): 1.9kg.
Availability: In Stock
£142.99
Archived Product
-
Ultra compact driver
drill, ideal for working
in confined spaces. Light
weight 10.8v 1.5ah li-ion
batteries
automatic trigger
operated led spotlight
variable speed motor
21 stage torque setting
6.35mm quick lock hex bit
holder
spindle lock for accurate
tightening of screws
soft grip handle
battery: 2 x bcl1015,
1.5ah li-ion
no-load speed: 0-400/min
drilling capacity
wood :18mm
machine screw: 6mm
wood screw :6mm
maximum torque :10nm 21
settings
chuck: 6.35mm (1/4in) hex
charge time: 40 minutes
weight: 0.8kg
standard accessories: 2 x
1.5ah battery, charger,
driver bit, carrying case
.
Availability: In Stock
£117.55
Archived Product
-
12v cordless lithium-ion
- slim,
compact
drill/driver with 1hr
mains charger & battery.
Availability: In Stock
£93.95
Archived Product
-
This tool weighs only
1.1kg and is small,
lightweight and very
versatile making it
useful for many
applications. it is ideal
for kitchen fitters,
joiners, engineers,
electricians, plumbers,
service engineers in fact
practically every
tradesmen. The batteries
only take 15 minutes to
recharge and should
satisfy the fastest
worker and people will
get a lot of pleasure
from using these
attractive tools.
specification
-10.8 volt
-27 nm torque
-2 speed
-upto 1240 rpm
-20 torque settings
-10 mm keyless chuck
-2 x 1.3 ah li-ion
batteries
-15 minutes charge time
-led light on tool free
bit set
-hard, professional
carry case
-1 year warranty
-all metal gearbox
-electric brake
-variable speed
-easy brush change
- weight 1.1
kg.
Availability: In Stock
£148.85
Archived Product
-
19.2v 1/2” square drive
- the most
powerful
super torque cordless
impact wrench 400lb.ft.
Availability: In Stock
£352.45
Archived Product
-
14.4v super torque
- extra
powerful
cordless hammer
drill/driver 1hr charge -
2 batteries.
Availability: In Stock
£105.69
Archived Product
-
19.2v 1/2” square drive
- compact and
powerful
super torque cordless
impact wrench 285lb.ft.
Availability: In Stock
£297.35
Archived Product
-
24v 1/2” square drive
- powerful,
compact
cordless
cordless impact wrench
325lb.ft.
Availability: In Stock
£187.95
Archived Product
-
19.2v 1/2” square drive
- one of the
most
super torque cordless
impact wrench 300lb.ft.
Availability: In Stock
£336.95
Archived Product
-
The tool works as fast as
you do with consistent
nail penetration. -
sequential operating mode
allows for precision
placement and the bump
operating mode provides
the user with production
speed
- headlights provide
increased visibility in
low-light conditions or
confined areas without
any light
- depths can be easily
referenced utilising
numbered dial and user
does not sacrifice
performance when changing
depths
- user can engage contact
trip lock-off and prevent
accidental dis-charge of
fastener
- provides increased
durability over current
cordless nailers and
provides easy access for
troubleshooting and
service on the job-site
or by a service
technician
- provides easy access to
the nosepiece for the
simple removal of a
jammed fastener without
the use of screwdrivers
or tool wrenches
- versatility in the
loading and unloading of
fasteners - 20 degree
angled magazine 120 nail
capacity
- provides increased
portability and
versatility on the
job-site
- increased visibility
and durability along with
protection for
work-surface from the
contact-trip
- will accept paslode
20-degree nails
- top cap is impact
resistant and easy to
remove for
troubleshooting
applications : for new
construction and
remodeling applications,
door and window trim,
paneling, baseboard,
casing, cabinetry,
crown molding, door
jambs, cap and shoe
molding
nail diameter: 1.6mm
magazine angle: 20â°
nail length: 32-63mm
magazine capacity: up to
120 nails
magazine loading: rear -
load
air consumption per shot
@6.9 bar
firing mode: bump &
sequential
length: 330mm
width: 105mm
height: 320mm
weight: 3.9kg
voltage: 18 volt
standard equipment
30 minute charger, 2 x
nimh 2.6ah batteries,
dewalt safety glasses,
reversible belt hook,
no-mark tip, heavy-duty
carrying
case.
Availability: In Stock
£408.60
Archived Product
-
18v super torque cordless
- extra
powerful
hammer drill/driver 1hr
charge - 2 batteries.
Availability: In Stock
£117.45
Archived Product
-
Features: higher torque
and faster speed
increased productivity.
robust design for
increased durability.
440nm of deliverable
torque in forward and
reverse. soft grip handle
to reduce vibrations and
to enhance user comfort.
Specifications:power
input 710 watts.power
output 370 watts.no load
speed 2200 rpm. impacts
per minute 2700 ipm.bit
holder 1/2 ".weight 3.2
kg.length 292 mm. height
216 mm. Max bolt diameter
m20. Standard: 1/2 inch
ring retainer..
Availability: In Stock
£229.95
Archived Product
-
The draper expert 10.8v
cordless 1/4" hexagon
impact driver kit with
two li-ion batteries has
the following features.
General features:
expert
quality
li-ion cells have
good energy-to-weight
ratio with no memory
effect, and a slow loss
of charge when not in use
contents: 10.8v
impact driver and 24 led
torch
specifications:
impact driver:
1/4"
'quick-release' hexagon
drive
variable speed
control
compact hi-torque
motor (98nm max.)
external
changeable carbon brushes
electric brake
forward/reverse
facility
soft grip handle
and trigger
24 led torch:
soft grip handle
24 leds for extra
brightness
belt clip
supplied complete with:
carrying case, 2 x 10.8v
1.1ah li-ion battery
packs, five quick change
flat wood bits, six
insert bits, 230v ac one
hour fast charger with bs
3 pin plug. display
packed. Part number
cid108vkli. Ean:
5010559483723. Weight:
4.56
kg.
Availability: In Stock
£149.95
Archived Product
-
Features: expert quality.
1/4" 'quick-release'
hexagon drive. variable
speed control. compact
hi-torque motor (127nm
max.). external
changeable carbon
brushes. electric brake.
forward/reverse facility.
battery level indicator.
soft grip handle and
trigger. supplied
complete with:
carrying case, 2 x 14.4v
1.7ah battery packs,
230v ac 1 hour fast
charger with bs 3 pin
plug.
specification:
maximum torque: 127nm.
impacts per minute:
3000max. speed (no
load): 0-2300r/min.
weight (inc. battery
pack): 1.8kg.
Availability: In Stock
£132.79
Archived Product
-
Large 20mm drilling
capacity into concrete or
masonry. 13mm keyless
chuck adaptor means the
crh-240re can be used for
wood and steel drilling
and driving.
dual mode so you can
drill with hammer on or
hammer off
variable speed trigger
0-1, 000 rpm and 0-5, 200
bpm
powerful 2 joules impact
energy.
included as standard
2 x 24v (2.0ah) batteries
1 x 1 hour charger
13mm chuck and adaptor
auxillary handle
depth stop
blow moulded carry case.
2 year
warranty.
Availability: In Stock
£330.45
Archived Product
-
18v cordless lithium-ion
- features
2-speed
drill/driver with 1hr
mains charger & battery.
Availability: In Stock
£211.79
Archived Product
-
Durable fan cooled motor
delivers up to 125 nm of
sustained torque and up
to 3000 impacts per
minute for hard joint
screwdriving.
all metal gearing for
efficient power
transmission and long
tool life
aluminium front housing
for better weight and
balance
modular component design
for easy access and fast
service
forward, reverse,
variable speed and
electronic motor brake
for total control
6.35 mm keyless
hex-drive allows for
quick and easy bit
changes
rubber coated grip and
rear of the tool to
reduce surface vibration
and user fatigue
specifications
voltage: 18 v
bit holder: 1/4 in
battery: fits 2.0, 2.4,
3.0 ah
power output: 220 watts
no load speed: 0-2400
rpm
impacts per minute:
0-3000 ipm
max torque: 125 nm
max. bolt diameter: m12
weight: 2.1 kg
length: 166 mm
height: 233
mm.
Availability: In Stock
£156.75
Archived Product
-
24v 1/2” square drive
- up to
550nm (410lb.ft)
torque,
cordless impact wrench
410lb.ft.
Availability: In Stock
£270.19
Archived Product
-
12v cordless lithium-ion
- slim,
100mm angle grinder with
1hr mains charger &
battery.
Availability: In Stock
£129.89
Archived Product
-
This 18 volt cordless
contractors jumbo pack
contains. Bsb 18
heavy-duty combi drill
bss
Availability: In Stock
£632.19
Archived Product
-
Impact drill with 550
watt motor, variable
speed and reverse.
Lightweight and compact.
ergonomic
Availability: In Stock
£58.75
Archived Product
-
Dewalt professional
impact wrench with the
following features. 440nm
of deliverable torque in
forward and reverse
higher torque and faster
speed increased
productivity
soft grip handle to
reduce vibrations and to
enhance user comfort
robust design for
increased durability
includes :1/2 inch ring
retainer
specifications
max torque: 440 nm
power input: 710 watts
power output: 370 watts
no load speed: 2200 rpm
impacts per minute: 2700
ipm
max. bolt diameter: m20
bit holder: 1/2in
weight: 3.2 kg
length: 292 mm
height: 216 mm
.
Availability: In Stock
£225.85
Archived Product
-
Compact, light and well
balanced. Magnesium die
cast base for durability
165 mm blade on
Availability: In Stock
£309.75
Archived Product
-
Powerful, compact,
cordless impact wrench
with electronic variable
speed trigger. forward,
reverse and trigger lock
control integrated into
housing for ease of use.
superbly balanced tool
with vibration reducing
grip. suitable for
workshop applications.
includes 14.4volt
ni-cd battery pack and 1
hour mains charger.
Battery: 14.4v. drive
size: 3/8"sq. no load
speed: 0-2200rpm.
impact rate: 0-2900bpm.
maximum torque:
2075kg.cm/150lb.ft.
battery model no:
cp1440bp. weight:
1.8kg.
Availability: In Stock
£205.00
Archived Product
-
12v cordless lithium-ion
- slim,
compact
75mm polisher with 1hr
mains charger & battery.
Availability: In Stock
£125.09
Archived Product
-
The draper 10.8v cordless
1/4" impact driver/torch
kit & cordless rotary
drill has the following
features.
• expert
quality
• li-ion cells
have good
energy-to-weight ratio
with no memory effect,
and a slow loss of charge
when not in use
• contents: 10.8v
impact driver and 24 led
torch
specifications:
[w]impact driver[w]:
• 1/4"
''quick-release'' hexagon
drive
• variable speed
control
• compact
hi-torque motor (98nm
max.)
• external
changeable carbon brushes
• electric brake
• forward/reverse
facility
• soft grip handle
and trigger
[w]24 led torch[w]:
• soft grip handle
• 24 leds for
extra brightness
• belt clip
[w]cordless rotary
drill[w] (without
battery)
• expert
quality
• spindle lock for
easy bit change
• led work light
• variable speed
control
• 11 position
torque control
• two speed
gearbox
• 10mm keyless
chuck
• electric brake
• forward/reverse
facility
• soft grip handle
and trigger
supplied complete with:
carrying case, 2 x 10.8v
1.1ah li-ion battery
packs, six quick change
hss drill bits, five
insert bits, 230v ac one
hour universal fast
charger with bs 3 pin
plug. display packed.
Specification -[w] impact
driver[w]:
maximum
torque ...
98nm
impacts per
minute ... 3000max.
speed (no
load) ... 0-2000r/min
weight (ex.
bat.
Availability: In Stock
£209.45
Archived Product
-
Variable speed impact
drill, keyless chuck,
reverse facility, soft
grip handle with 790w
motor. two speed, chuck
capacity 13mm. Power
input: 790w
no-load speed:
0-1000/3000/min
full-load impact rate:
0-13000/39000/min
capacity
brick :20mm
steel :13mm
wood :40mm
chuck: 13mm keyless
overall length: 333mm
weight: 2.2kg
standard accessories
:side handle, depth
stop, carrying case
.
Availability: In Stock
£139.10
Archived Product
featured
in:
spring promotion
2010
summer promotion
2010
new lines promotion
2010
click
Availability: In Stock
£234.95
Archived Product
-
18v 1/2"sq drive cordless
- produces torque
in excess
lithium-ion impact wrench
300lb.ft.
Availability: In Stock
£115.55
Archived Product
-
Ideal for use in the
workshop or on site for
light trade work.
substained torque and up
to 3000 impacts per
minute for hard joint
screwdriving. metal
gearing for efficient
power transmission. soft
grip. compact design.
Foward and reverse
variable speed switch
with electronic brake.
supplied with a 60 minute
quick charger and two
2.0ah ni-mh batteries.
Easy access to brushes.
not recommended for use
with the trend angle
driver, auger bits over
13mm and flat bits over
20mm.
specifications:
rating light trade.
voltage uk & eire 12v.
no load sped (min.)
0-2300rpm. impact rate
3000rpm. maximum torque
160nm. tool holder
1/4". screw size: -
mechanical m4-m8. -
standard m5-m12. - high
tension m5-m10. weight
(excl. battery) 1.04kg.
sound pressure lpa 96.5
db(a)1. acoustic
pressure lwa 100.3
db(a)2. hand arm
vibration
Availability: In Stock
£194.09
Denmark