Durable frameless high speed motor delivers up to 180 nm of max torque. All metal gearing for efficient power transmission & long tool life
aluminium front housing provides greater heat dispersion increasing motor life
improved variable speed switch & electronic motor brake for complete control for both setting & removing fasteners
1/2in square drive allows for quick & easy bit changes
compact body enables use in tight spaces
rubber coated grip & rear of the tool to reduce surface vibration & user fatigue
led light for enhanced visibility of fastener
applications
fastening small metal constructions
fastening panels & other vehicle components
anchoring of support jacks, angles, brackets in concrete, solid brick etc
tightening together rafters
fastening roofs to metal girders
fastening pipes & rails to walls
fastening wooden forms for making concrete constructions
fastening extruded metal sheet to metal frames for roofing
fastening sandwich panels to the building or roof structure ]
specifications
voltage: 14.4 v
battery capacity : nimh 2.6 ah
bit holder : 1/2in
power output: 240 watts
no load speed : 0-2400 rpm
impacts per minute : 0-2700 ipm
max. torque: 180nm
max. bolt diameter: m 16
weight 1.8kg
length 146 mm
height 231 mm ]
standard equipment: 30 minute fast charger, 2 batteries, heavy-duty carrying case.




























...

Durable frameless high speed motor delivers up to 140 nm of max torque. All metal gearing for efficient power transmission & long tool life
aluminium front housing provides greater heat dispersion increasing motor life
enhanced variable speed switch & electronic motor brake for complete control for both setting & removing fasteners
6.35 mm keyless hex-drive allows for quick & easy bit changes
compact body enable use in tight spaces
rubber coated grip & rear of the tool to reduce surface vibration & user fatigue
led light for enhanced visibility of fastener
applications
variety of small fastenings in wood & metal
iron mongery, hardware fixtures, variety of repair applications
assembling ducts, air conditioning & central heating systems
fastening sandwich panels to the building or roof structure
fastening extruded metal sheet to metal frames for roofing
fastening rafters
fixing laps of roofing or cladding sheets & flashings
fastening wooden forms for making concrete constructions
specifications
voltage 14.4v v
battery capacity nimh 2.6 ah
bit holder 1/4in
power output 240 watts
no load speed 0-2400 rpm
impacts per minute 0-2700 ipm
max torque 140 nm
max. bolt diameter m 12
weight 1.8kg
length 146 mm
height 231 mm
standard equipment
30 minute fast charger
2 batteries
heavy-duty carrying case.






























...

Durable frameless high speed motor delivers up to 160 nm of max torque. All metal gearing for efficient power transmission & long tool life
aluminium front housing provides greater heat dispersion increasing motor life
improved variable speed switch & electronic motor brake for complete control for both setting & removing fasteners
1/2in square drive allows for quick & easy bit changes
compact body enables use in tight spaces
rubber coated grip & rear of the tool to reduce surface vibration & user fatigue
led light for enhanced visibility of fastener
applications
fastening small metal constructions
fastening panels & other vehicle components
anchoring of support jacks, angles, brackets in concrete, solid brick etc
tightening together rafters
fastening roofs to metal girders
fastening pipes & rails to walls
fastening wooden forms for making concrete constructions
fastening extruded metal sheet to metal frames for roofing
fastening sandwich panels to the building or roof structure
specifications
voltage: 12 volt
battery capacity :  nimh 2.6 ah
bit holder: 1/2in
power output: 220 watts
no load speed: 0-2400 rpm
impacts per minute: 0-2700 ipm
max. torque :160 nm
max. bolt diameter: m 16
weight 1.7 kg
length 146 mm
height 231 mm
standard equipment
30 minute charger
2 batteries
heavy-duty carrying case
 .
































...

Durable frameless high speed motor delivers up to 130 nm of max torque. All metal gearing for efficient power transmission & long tool life
aluminium front housing provides greater heat dispersion increasing motor life
improved variable speed switch & electronic motor brake for complete control for both setting & removing fasteners
6.35 mm keyless hex-drive allows for quick & easy bit changes
compact body enable use in tight spaces
rubber coated grip & rear of the tool to reduce surface vibration & user fatigue
led light for enhanced visibility of fastener
applications
variety of small fastenings in wood & metal
iron mongery, hardware fixtures, variety of repair applications
assembling ducts, air conditioning & central heating systems
fastening sandwich panels to the building or roof structure
fastening extruded metal sheet to metal frames for roofing
fastening rafters
fixing laps of roofing or cladding sheets & flashings
fastening wooden forms for making concrete constructions
specifications
voltage 12v v
battery capacity nimh 2.6 ah
bit holder 1/4in
power output 220 watts
no load speed 0-2400 rpm
impacts per minute 0-2700 ipm
max torque 130 nm
max. bolt diameter m 12
weight 1.7kg
length 146 mm
height 231 mm
standard equipment
30 minute charger
2 batteries
heavy-duty carrying case.






























...

Powerful 28 volt combination tool for heavy-duty hammerdrilling & screwdriving applications . Three speed settings for optimum performance in high torque, normal use & high speed applications 
22 position adjustable torque control for uniform results & optimised precision when screwdriving 
13 mm all metal self-tightening keyless chuck tightens throughout operation providing superior bit gripping strength 
ergonomically designed trigger & anti-slip comfort grip provides increased comfort & control 
electronic brake for added control 
high performance fan cooled motor for maximum power & durability 
all metal gearing for efficient power transmission & longer tool life 
enhanced durability & reliability to withstand the job-site environment & the most demanding applications 
exclusive nano phosphate li-ion battery pack provides 2000 charge cycles, more than double that of nicd/nimh packs 
battery pack produces 28 volt power at equivalent weight to 14.4 volt nicd/nimh pack weight
applications
furniture manufacture & assembly, screwdriving & drilling of holes in hardwood.
installing light & socket fixtures, hanging of signs etc.. drilling into masonry
drilling of ferrous & non ferrous metals.
assembly & hanging of cabinets.
assembling ducts, central heating & air conditioning.
hardware fixtures, variety of repair applications.
hardware fixtures, fastening of hanging pipes & drilling into masonry.
fixing of steel cladding on commercial buildings & drilling into masonry.
installation of wood/pvc frames. drilling into masonry & screwdriving applications.

specifications
voltage : 28 v
battery capacity : li-ion 2.2 ah
chuck capacity: 1.5-13 mm
power output: 650 watts
no load speed: 0-400 / 0-1200 / 0-1600 rpm
beats per minute: 0-6800 / 0-20400 / 0-27200 bpm
max torque: 42 nm
max. drilling capacity
wood 65 mm
metal 13 mm 
masonry 16 mm
weight 2.8kg
length 267 mm
height 260 mm
.



































...

The dewalt family of cordless tools are combined together for convenience & value in the dewalt combopacks. The combopacks ...

Powerful 18 volt combination tool for heavy-duty hammerdrilling & screwdriving applications. Three speed settings for optimum performance in high torque, normal use & high speed applications.
22 position adjustable torque control for uniform results & optimised precision when screwdriving
up to 38 nm of sustained torque for maximum performance
13 mm self-tightening chuck tightens throughout operation providing superior bit gripping strength
ergonomically designed trigger & rubber grip
electronic brake for added control
high performance fan cooled motor with replaceable brushes for maximum power & durability
all metal gearing for efficient power transmission & longer tool life
exclusive nano phosphate li-ion battery pack provides 2000 charge cycles, more than double that of nicd/nimh packs
battery pack produces 18 volt power at less than 12 volt nicd/nimh pack weight providing the ultimate ergonomic solution
compatible with all dewalt 18 volt packs
applications
furniture manufacture & assembly, screwdriving & drilling of holes in hardwood.
installing light & socket fixtures, hanging of signs etc.. drilling into masonry
drilling of ferrous & non ferrous metals.
variety of drilling & fastening applications.
assembly & hanging of cabinets.
assembling ducts, central heating & air conditioning.
hardware fixtures, variety of repair applications.
hardware fixtures, fastening of hanging pipes & drilling into masonry.
fixing of steel cladding on commercial buildings & drilling into masonry.
installation of wood/pvc frames. drilling into masonry & screwdriving applications.

specifications
voltage : 18 v
battery capacity : li-ion 2.0 ah
chuck capacity: 1.5-13 mm
power output: 425 watts
no load speed: 0-450 / 0-1500 / 0-1800 rpm
beats per minute: 0-7650 / 0-25500 / 0-30600 bpm
max torque: 38 nm
max. drilling capacity
wood :50mm
metal :13mm
masonry :16mm
weight 2.4 kg
length 267 mm
height 250 mm.




































...

- powerful 14.4 volt combination tool for heavy-duty hammerdrilling & screwdriving applications.
- three speed settings for optimum
...