United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Hand Tools > Engineering & Metalworking Tools > Punches
Archived Product
-
Extra long, they are
hardened and tempered
with a knurled grip. the
drive pin sections are
90mm (3 1/2 inch) long
and the diameters of the
punches are slightly
under the sizes listed.
Length: 200mm / 8 inch
set of all sizes in case:
(3mm / 1/8 inch, 5mm /
3/16 inch, 6mm / 1/4
inch, 8mm / 5/16 inch,
9.5mm / 3/8 inch).
Availability: In Stock
£25.55
Archived Product
-
For marking metals and
other solid materials.
Produced from quality
steel, heat treated and
nickel plated to give
maximum endurance and
accuracy of impression.
packed in attractive
plastic box.
size. 5/16in./8.0mm
contents a to z plus &
(and).
Availability: In Stock
£66.50
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.60.0mm.
key type. me.
14mm.
Availability: In Stock
£27.49
Archived Product
-
Well proportioned,
hardened and tempered
with knurled finger grip.
Set of all sizes: (1.5mm
(1/16 inch), 2.5mm (3/32
inch), 3mm (1/8 inch),
4mm (5/32 inch), 5mm
(3/16 inch), 5.5mm (7/32
inch), 6mm (1/4 inch),
8mm (5/16 inch)).
length: 100mm (4
inch).
Availability: In Stock
£29.59
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.1.3/4in.
key type.b. 5/16in
af.
Availability: In Stock
£12.39
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.12.5mm.
key type.ma.
6mm.
Availability: In Stock
£5.65
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.1.1/8in.
key type.b. 5/16in
af.
Availability: In Stock
£7.29
Archived Product
-
For marking metals and
other solid materials.
Produced from quality
steel, heat treated and
nickel plated to give
maximum endurance and
accuracy of impression.
packed in attractive
plastic box.
size. 5/64in/2.0mm
contents a to z plus &
(and).
Availability: In Stock
£28.85
Archived Product
-
For marking metals and
other solid materials.
Produced from quality
steel, heat treated and
nickel plated to give
maximum endurance and
accuracy of impression.
packed in attractive
plastic box.
size. 1/4in/6.0mm
contents a to z plus &
(and).
Availability: In Stock
£36.99
Archived Product
-
Number punch set made
from high quality tested
carbon steel, double
induction hardened for
high quality stamping.
head is tempered to
prevent chipping while
hammering. Contents: 1,
2, 3, 4, 5, 6, 7,
8, 9, 0 (9 is achieved
by reversing 6).
size: 3mm.
set supplied in plastic
box.
Availability: In Stock
£6.29
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.5/8in.
key type. a. 7/32in
af.
Availability: In Stock
£5.75
Archived Product
-
These punches are made
from uniformly heat
treated carbon steel and
are used for removing
pins in parallel holes.
The pins should first be
started with a hand or
taper punch to avoid
damage to the end of the
parallel punch.
the set of four punches
include one of each of
the following:
3.0mm, 4.0mm, 5.0mm and
6.35mm tip diameters.
length: 4in / 100mm
pin length: 25mm
type: round head parallel
punches
set of
4.
Availability: In Stock
£7.35
Archived Product
-
These punches are made
from uniformly heat
treated carbon steel and
are used for removing
pins in parallel holes.
The pins should first be
started with a hand or
taper punch to avoid
damage to the end of the
parallel punch.
length: 4in/100mm
pin length: 25mm
tip diameter:
1/16in/1.6mm.
Availability: In Stock
£1.85
Archived Product
-
These punches are made
from uniformly heat
treated carbon steel and
are used for removing
pins in parallel holes.
The pins should first be
started with a hand or
taper punch to avoid
damage to the end of the
parallel punch.
length: 4in/100mm
pin length: 25mm
tip diameter
1/8in/3.0mm.
Availability: In Stock
£1.85
Archived Product
-
For marking metals and
other solid materials.
Produced from quality
steel, heat treated and
nickel plated to give
maximum endurance and
accuracy of impression.
packed in attractive
plastic box.
size. 1/2in./12.0mm
contents a to z plus &
(and).
Availability: In Stock
£114.70
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.47.0mm.
key type.mc.
10mm.
Availability: In Stock
£14.29
Archived Product
-
Number punch set made
from high quality tested
carbon steel, double
induction hardened for
high quality stamping.
head is tempered to
prevent chipping while
hammering. Contents: 1,
2, 3, 4, 5, 6, 7,
8, 9, 0 (9 is achieved
by reversing 6).
size: 8mm.
set supplied in plastic
box.
Availability: In Stock
£12.19
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.70.0mm.
key type.me.
14mm.
Availability: In Stock
£43.95
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.3/8in.
key type.t. 3/16in
af.
Availability: In Stock
£5.49
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.24.0mm.
key
type.mb.8mm.
Availability: In Stock
£6.80
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.35.0mm.
key type.mc.
10mm.
Availability: In Stock
£8.85
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.37.5mm.
key type. mc.
10mm.
Availability: In Stock
£10.55
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.75.0mm.
key type.
me.14mm.
Availability: In Stock
£62.15
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.22.5mm.
key type.mb.
8mm.
Availability: In Stock
£6.59
Archived Product
-
Long series pin punch
with extended parallel
pin, used for the
removal of tight pin and
metal dowels from
mechanical fittings and
machinery. Designed for
heavy-duty use and are
made from uniformly heat
treated tool steel with a
round head and a knurled
body for a firm grip.
type: long series
parallel pin punch.
size: 3/8in
parallel pin length: 90mm
overall length:
200mm.
Availability: In Stock
£2.79
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size. 45.0mm.
key type. mc.
10mm.
Availability: In Stock
£12.75
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.52.0mm.
key type.me.
14mm.
Availability: In Stock
£18.19
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.3/4in.
key type. a.7/32in
af.
Availability: In Stock
£6.09
Archived Product
-
These punches are made
from uniformly heat
treated carbon steel and
are used for removing
pins in parallel holes.
The pins should first be
started with a hand or
taper punch to avoid
damage to the end of the
parallel punch.
length: 4in/100mm
pin length: 25mm
tip diameter
3/32in/2.5mm.
Availability: In Stock
£1.85
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.29.0mm.
key type.mb.
8mm.
Availability: In Stock
£7.25
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.31.0mm.
key type.mb.
8mm.
Availability: In Stock
£7.69
Archived Product
-
Hardened steel punches
carefully heat treated
for long life. Precisely
knurled body with square
head which gives a good
striking area and
prevents the punch from
rolling.
walleted set of 4
containing one of each of
the following sizes.
1/16, 3/32, 1/8, and
3/16in.
length
100mm.
Availability: In Stock
£12.85
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.9/16in.
key type. a. 7/32in
af.
Availability: In Stock
£5.65
Archived Product
-
Long series pin punch
with extended parallel
pin, used for the
removal of tight pin and
metal dowels from
mechanical fittings and
machinery. Designed for
heavy-duty use and are
made from uniformly heat
treated tool steel with a
round head and a knurled
body for a firm grip.
type: long series
parallel pin punch.
size: 1/4in
parallel pin length: 90mm
overall length:
200mm.
Availability: In Stock
£2.79
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.51.0mm.
key type.mc.
10mm.
Availability: In Stock
£15.49
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.27.5mm.
key type.mb.
8mm.
Availability: In Stock
£7.25
Archived Product
-
Long series pin punch
with extended parallel
pin, used for the
removal of tight pin and
metal dowels from
mechanical fittings and
machinery. Designed for
heavy-duty use and are
made from uniformly heat
treated tool steel with a
round head and a knurled
body for a firm grip.
type: long series
parallel pin punch.
size: set 8 1.5, 2.5,
3, 4, 5, 6, 8 and
10mm
parallel pin length: 90mm
overall length:
200mm.
Availability: In Stock
£20.85
Archived Product
-
Number punch set made
from high quality tested
carbon steel, double
induction hardened for
high quality stamping.
head is tempered to
prevent chipping while
hammering. Contents: 1,
2, 3, 4, 5, 6, 7,
8, 9, 0 (9 is achieved
by reversing 6).
size: 4mm.
set supplied in plastic
box.
Availability: In Stock
£6.29
Archived Product
-
Long series pin punch
with extended parallel
pin, used for the
removal of tight pin and
metal dowels from
mechanical fittings and
machinery. Designed for
heavy-duty use and are
made from uniformly heat
treated tool steel with a
round head and a knurled
body for a firm grip.
type: long series
parallel pin punch.
size: 3/16in
parallel pin length: 90mm
overall length:
200mm.
Availability: In Stock
£2.79
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without spanner, which
should be ordered
separately.
size.19.0mm.square.
spanner operated 5/8in
af.
Availability: In Stock
£42.59
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without spanner, which
should be ordered
separately.
size.3/4in square.
spanner operated. 5/8in
af.
Availability: In Stock
£42.59
Archived Product
-
These punches are made
from uniformly heat
treated carbon steel and
are used for removing
pins in parallel holes.
The pins should first be
started with a hand or
taper punch to avoid
damage to the end of the
parallel punch.
length: 4in/100mm
pin length: 25mm
tip diameter
5/32in/4.0mm.
Availability: In Stock
£1.85
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.32.5mm.
key type.mc.
10mm.
Availability: In Stock
£8.19
Archived Product
-
For marking metals and
other solid materials.
Produced from quality
steel, heat treated and
nickel plated to give
maximum endurance and
accuracy of impression.
packed in attractive
plastic box.
size. 3/32in/2.5mm
contents a to z plus &
(and).
Availability: In Stock
£28.85
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without spanner, which
should be ordered
separately.
size.25.4mm.square.
key type. b key operated.
5/16in.
Availability: In Stock
£44.59
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.20.0mm.
key
type.mb.8mm.
Availability: In Stock
£6.49
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size. 50.0mm.
key type. mc.
10mm.
Availability: In Stock
£14.85
Archived Product
-
These punches are made
from uniformly heat
treated carbon steel and
are used for removing
pins in parallel holes.
The pins should first be
started with a hand or
taper punch to avoid
damage to the end of the
parallel punch.
length: 4in/100mm
pin length: 25mm
tip diameter
3/16in/4.8mm.
Availability: In Stock
£1.85
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.80.0mm.
key type.me.
14mm.
Availability: In Stock
£90.99
Archived Product
-
For marking metals and
other solid materials.
Produced from quality
steel, heat treated and
nickel plated to give
maximum endurance and
accuracy of impression.
packed in attractive
plastic box.
size. 3/8in./10.0mm
contents a to z plus &
(and).
Availability: In Stock
£86.55
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.28.3mm.
key type.mb.
8mm.
Availability: In Stock
£7.25
Archived Product
-
Rugged steel centre punch
has a mechanism which
automatically strikes a
blow when downward
pressure is applied.
force of blow is
regulated by the
adjustable knurled cap.
no hammer is required.
Punch length: 125mm / 5
inch
punch diameter: 14mm /
9/16 inch.
Availability: In Stock
£21.59
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.54.0mm
key type.me.
14mm.
Availability: In Stock
£18.75
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.34.0mm.
key type.mc.
10mm.
Availability: In Stock
£8.25
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.55.0mm.
key type. me.
14mm.
Availability: In Stock
£18.99
Archived Product
-
Number punch set made
from high quality tested
carbon steel, double
induction hardened for
high quality stamping.
head is tempered to
prevent chipping while
hammering. Contents: 1,
2, 3, 4, 5, 6, 7,
8, 9, 0 (9 is achieved
by reversing 6).
size: 12mm.
set supplied in plastic
box.
Availability: In Stock
£30.05
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.48.0mm.
key type. mc.
10mm.
Availability: In Stock
£14.29
Archived Product
-
Long series pin punch
with extended parallel
pin, used for the
removal of tight pin and
metal dowels from
mechanical fittings and
machinery. Designed for
heavy-duty use and are
made from uniformly heat
treated tool steel with a
round head and a knurled
body for a firm grip.
type: long series
parallel pin punch.
size: 5/32in
parallel pin length: 90mm
overall length:
200mm.
Availability: In Stock
£2.79
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.40.0mm.
key type.mc.
10mm.
Availability: In Stock
£12.00
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.25.0mm.
key type.mb.
8mm.
Availability: In Stock
£6.80
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.7/16in.
key type. t. 3/16in
af.
Availability: In Stock
£5.49
Archived Product
-
Number punch set made
from high quality tested
carbon steel, double
induction hardened for
high quality stamping.
head is tempered to
prevent chipping while
hammering. Contents: 1,
2, 3, 4, 5, 6, 7,
8, 9, 0 (9 is achieved
by reversing 6).
size: 2mm.
set supplied in plastic
box.
Availability: In Stock
£6.29
Archived Product
-
Number punch set made
from high quality tested
carbon steel, double
induction hardened for
high quality stamping.
head is tempered to
prevent chipping while
hammering. Contents: 1,
2, 3, 4, 5, 6, 7,
8, 9, 0 (9 is achieved
by reversing 6).
size: 10mm.
set supplied in plastic
box.
Availability: In Stock
£18.95
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
size.1in. square.
key type. b key operated.
5/16in
af.
Availability: In Stock
£44.59
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.76.5mm.
key type. me.
14mm.
Availability: In Stock
£62.29
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.7/8in.
key type.a. 7/32in
af.
Availability: In Stock
£6.49
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.37.0mm.
key type.mc.
10mm.
Availability: In Stock
£10.25
Archived Product
-
These punches are made
from uniformly heat
treated carbon steel and
are used for removing
pins in parallel holes.
The pins should first be
started with a hand or
taper punch to avoid
damage to the end of the
parallel punch.
length: 4in x 100mm
pin length: 25mm
tip diameter 1/4in /
6.00mm.
Availability: In Stock
£1.85
Archived Product
-
Number punch set made
from high quality tested
carbon steel, double
induction hardened for
high quality stamping.
head is tempered to
prevent chipping while
hammering. Contents: 1,
2, 3, 4, 5, 6, 7,
8, 9, 0 (9 is achieved
by reversing 6).
size: 6mm.
set supplied in plastic
box.
Availability: In Stock
£8.59
Archived Product
-
For marking metals and
other solid materials.
Produced from quality
steel, heat treated and
nickel plated to give
maximum endurance and
accuracy of impression.
packed in attractive
plastic box.
size. 3/16in./5.0mm
contents a to z plus &
(and).
Availability: In Stock
£32.25
Archived Product
-
Hardened and tempered to
a spring temper. Used for
removing pins in parallel
holes.
the
Availability: In Stock
£25.50
Archived Product
-
These punches are made
from uniformly heat
treated carbon steel and
are used for removing
pins in parallel holes.
The pins should first be
started with a hand or
taper punch to avoid
damage to the end of the
parallel punch.
the set of eight punches
include one of each of
the following.
1.5mm, 2.5mm, 3.0mm,
4.0mm, 5.0mm, 5.5mm,
6.0mm, and 8mm
(tip diameter x 4in long)
pin length
25mm.
Availability: In Stock
£16.19
Archived Product
-
Long series pin punch
with extended parallel
pin, used for the
removal of tight pin and
metal dowels from
mechanical fittings and
machinery. Designed for
heavy-duty use and are
made from uniformly heat
treated tool steel with a
round head and a knurled
body for a firm grip.
type: long series
parallel pin punch.
size: 3/32in
parallel pin length: 90mm
overall length:
200mm.
Availability: In Stock
£2.79
Archived Product
-
Number punch set made
from high quality tested
carbon steel, double
induction hardened for
high quality stamping.
head is tempered to
prevent chipping while
hammering. Contents: 1,
2, 3, 4, 5, 6, 7,
8, 9, 0 (9 is achieved
by reversing 6).
size: 5mm.
set supplied in plastic
box.
Availability: In Stock
£6.29
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.30.0mm.
key
type.mb.8mm.
Availability: In Stock
£7.69
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.21.0mm.
key
type.mb.8mm.
Availability: In Stock
£6.49
Archived Product
-
Kit comprise a single wad
punch handle onto which
screw a series of nine
interchangeable punches.
the handles are blackened
and punches heat treated
and chemically blacked.
the handle should be
struck with a hammer or
mallet onto a wooden
block. the spring loaded
plunger in the handle
enables holes to be
accurately centred and
serves to eject the slug.
This metric set contains:
5, 6, 8, 10, 12.5, 16,
20, 25 and 32mm sizes.
Availability: In Stock
£35.09
Archived Product
-
Long series pin punch
with extended parallel
pin, used for the
removal of tight pin and
metal dowels from
mechanical fittings and
machinery. Designed for
heavy-duty use and are
made from uniformly heat
treated tool steel with a
round head and a knurled
body for a firm grip.
type: long series
parallel pin punch.
size: 5/16in
parallel pin length: 90mm
overall length:
200mm.
Availability: In Stock
£2.79
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.64.0mm.
key type.me.
14mm.
Availability: In Stock
£32.19
Archived Product
-
Kit comprise a single wad
punch handle onto which
screw a series of nine
interchangeable punches.
the handles are blackened
and punches heat treated
and chemically blacked.
the handle should be
struck with a hammer or
mallet onto a wooden
block. the spring loaded
plunger in the handle
enables holes to be
accurately centred and
serves to eject the slug.
This imperial set
contains: 1/4, 5/16, 3/8,
7/16, 1/2, 5/8, 3/4, 7/8
and 1in sizes.
Availability: In Stock
£33.75
Archived Product
-
Long series pin punch
with extended parallel
pin, used for the
removal of tight pin and
metal dowels from
mechanical fittings and
machinery. Designed for
heavy-duty use and are
made from uniformly heat
treated tool steel with a
round head and a knurled
body for a firm grip.
type: long series
parallel pin punch.
size: 1/8in
parallel pin length: 90mm
overall length:
200mm.
Availability: In Stock
£2.79
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.15.2mm.
key type.ma.
6mm.
Availability: In Stock
£5.75
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.15.0mm.
key type.ma.
6mm.
Availability: In Stock
£5.75
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.1.1/16in.
key type.b. 5/16in
af.
Availability: In Stock
£7.15
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.1.1/4in.
key type.b. 5/16in
af.
Availability: In Stock
£7.95
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.1.5/8in.
key type.b.
5/16in.
Availability: In Stock
£11.70
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.16.0mm.
key type.ma.
6mm.
Availability: In Stock
£5.75
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.2.5/8in.
key type.e. 1/2in
af.
Availability: In Stock
£36.15
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.19.0mm.
key type.mb.
8mm.
Availability: In Stock
£6.09
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.13/16in.
key type.a. 7/32in
af.
Availability: In Stock
£6.09
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.1.3/16in.
key type.b. 5/16in
af.
Availability: In Stock
£7.69
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.20.4mm.
key type.mb.
8mm.
Availability: In Stock
£6.49
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.12.7mm.
key type. ma.
6mm.
Availability: In Stock
£5.65
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches boxed singly
without key, which
should be ordered
separately.
to use these punches they
require a hole to be
drilled through the sheet
metal (large enough to
clear the allen screw)
then the die and allen
screw are threaded
through the sheet metal
then onto the die nut and
screw die nut. when the
allen screw is tightened
the punch will cut
cleanly and evenly
through the metal.
size.1in.
key type.b. 5/16in
af.
Availability: In Stock
£6.80
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
Availability: In Stock
£54.59
Archived Product
-
A quick and easy way to
cut clean holes in sheet
metal up to 16 gauge.
Special design allows
even load during cutting
and produces a burr free
hole that needs no extra
finishing.
heat treated cutting
edges with black
anti-corrosive surface
finish to prevent
rusting.
all punches are sold
singly without key,
which should be ordered
separately.
thread the punch onto the
allen screw and then pass
the allen screw through
the hole. position the
die on top of the die nut
and then screw the die
nut onto the projecting
allen screw until it
touches the metal sheet.
use an allen key to turn
the allen screw. the
screw will pull the punch
through the metal and a
hole will result.
please note these
instructions apply to
cutters up to 15mm in
size, for cutters 15mm
and over have a different
configuration. notably
they have fewer
components, in the
larger cutters the thread
is in the punch and thus
there is no die nut.
size.10.0mm.
key type.mt.
5mm.
Availability: In Stock
£5.49
Denmark