Knog Blinder 1 Cog LED Rear Light: A neat little light from Knog that wraps around your seat post. Simply fix via the buckle & away you go. Easy. All that high-powered surface-mount LED & the lithium polymer with its inbuilt USB (Universal Serial Bus) recharge is held in sweetly by a flexible silicone strap & clip. & as a cruiser he has a tool-less attachment for handlebars & frames of 22-32mm. Specifications Dimensions: 25 x 25 x 33mm Weight: 15g
Materials: UV-Resistant Industrial grade silicone. Polycarbonate Lens, Latch & Housing. Hard-anodised aluminium fascia. USB: Rechargeable Lithium Polymer battery Lumens: 11 lumens (LED Rating) Features LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead Visibility: Light is visible at over 500 metres Light Modes: 5 light modes: Steady, Fast Flash, Organic Flash Slow, Organic Flash Fast, Eco-flash Burn Time: Burn time of over 2-hours in constant & up to 11-hours eco-flash mode Battery: Rechargeable Lithium polymer battery via integrated USB (Universal Serial Bus) plug Integrated USB (Universal Serial Bus) Plug: Designed to be exposed to the elements, the plug is also waterproof & will not be damaged by exposure Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. The light is switched off with a long button push off (0.5sec) Storage Mode: Storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isnt being used.1. Charge the light for a full charge cycle. (indicator glows green when charged).2. Remove light from USB (Universal Serial Bus) charging device / port.3. Turn light on in any mode.4. Hold button down for more than 5 seconds, at which point the indicator LED will turn red.5. The light itself will remain on until the Blinder switches itself off & into storage mode Bike Attachment: Tool-less attachment for handlebars/rear-posts & frames of 22-32mm 100% Waterproof: The Blinder 1 is IP66 Tested & 100% waterproof against all elements Testing: The Blinder 1 has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock & static, vibration & impact, temperature & humidity, cycle testing & CE certification