Knog Blinder 1 Cog LED Front Light: High-powered surface-mount LED & lithium polymer with inbuilt USB (Universal Serial Bus) recharge is held together by a flexible silicone strap & clip. Tool-less attachment for handlebars & frames of 22-32mm. Visible at over 500 metres, the Blinder 1 has the added advantage of being able to shift its looks with 6 faceplate styles. Specifications Dimensions: 25 x 25 x 33mm Weight: 15g
Materials: UV-Resistant Industrial grade silicone. Polycarbonate Lens, Latch & Housing. Hard-anodised aluminium fascia. USB: Rechargeable Lithium Polymer battery Lumens: 20 lumens (LED Rating) Features LEDs: Efficient LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode. Rather than LED brightness deteriorating during your ride. Lens: Use of an optic design to provide a balanced ratio of beam width & distance to safely illuminate you & the path ahead. Visibility: Light is visible at over 500 metres. Light Modes: 5 light modes: Steady, Fast Flash, Organic Flash 1, Organic Flash 2, Eco-flash. Burn Time: Burn time of over 2-hours in constant & up to 11-hours eco-flash mode. Battery: Rechargeable Lithium polymer battery via integrated USB (Universal Serial Bus) plug. Integrated USB (Universal Serial Bus) Plug: Designed to be exposed to the elements, the plug is also waterproof & will not be damaged by expsure. Button: New longer button push on (0.75sec) prevents accidental activation of your light. Short presses switch modes continuously. The light is switched off with a long button push off (0.5sec). Storage Mode: Storage mode provides the best longevity for your Blinder light. Repeat this procedure every 3 months thereafter if the light isnt being used.1. Charge the light for a full charge cycle. (indicator glows green when charged).2. Remove light from USB (Universal Serial Bus) charging device / port.3. Turn light on in any mode.4. Hold button down for more than 5 seconds, at which point the indicator LED will turn red.5. The light itself will remain on until the Blinder switches itself off & into storage mode. Bike Attachment: Tool-less attachment for handlebars/rear-posts & frames of 22-32mm &248; 100% Waterproof: The Blinder 1 is IP66 Tested & 100% waterproof against all elements. Testing: The Blinder 1 has been tested against the following; Drop tests, corrosion tests, UV tests, Electrical shock & static, vibration & impact, temperature & humidity, cycle testing & CE certification.