Ready-to-use, highly elastic one-component sealing compound. The silicone-based, heat-resistant Coltogum sealing compound is perfect for a wide range of applications like automotive & machine repair. It's elasticity & heat resistance make it ideal for sealing & water proofing ducts, chimmneys, funaces, fireplaces & more.   Features: * Thermostable * Heat resistant up to 300 ° C
- short term 350 ° C * Thermo-resistance: from -60 ° C to + 350 ° C * Skin formation: approx. 10 minutes * Hardening: 4 mm after 48 h * Resistant to smoke & oil * Resistant to weather & agin * UV resistent * Acetic-crosslinking * Odourless after hardening * Highly elastic * Non-varnishable * Silicone based *

Colour: red brown Applications: * Sealing on boilers, heat exchangers, water heaters, & radiators * Sealing & waterproofing of fire resistant glass, fire doors, stove connections, ducts, heaths & chimney construction * Individual seals in engine & machines * Exterior furnace repairs   Contains: 310 ml Â


...

* Child safe * Scalding protection * Water-saving * Energy-saving. Thermostat enables a precise & effective temperature pre-selection which is always uniform. The temperature is maintained even in the event of pressure variations, so undesirable changes of bath temperature are now a thing of the past. The hot water lockout provides an additional safety measure as it prevents the inadvertent selection of temperatures above 38°C. All taps have a safety lockout at 38°, contamination collection filter & backflow prevention device. Suitable for gas & continuous flow heaters. Surface has bright chrome finish. ...

The grinding stone is used for fine grinding & sharpening steel blades. Due to the fact that kitchen knives are often used & washed again, the knives may gradually become dull. This grinding stone is perfect for returning blades to their original condition. Its two sided design has two different grits for each stage of grinding, both coarse & fine.

Features: * Grits: 360 / 1000 * Dimensions: 200 x 50 x 25 mm

...

All thread cutting tools are made from alloyed tool steel (hardness 59-62 HRC).  Sturdy mounting tools made from cast steel. Contents: * One of each thread-cutting die M3x 0.5, M4x 0.7, M5x 0.8, M6x 1, M7x 1, M8x 1.25, M10x 1.5, M12x 1.75, NPT 1/8.27 * One of each thread-cutting tap M3x 0.5, M4x 0.7, M5x 0.8, M6x 1, M7x 1, M8x 1.25, M10x 1.5, M12x 1.75, NPT1/8.27 * 1 thread-cutting die holder * 1 tap wrench Comes supplied in a metal box. ...

With your new 20-piece Westfalia tapping cutter set with ratchet you now have everything you need for professional tapping. With this high-quality set, they always have the best results.

Features: * Extensive set * For internal & external threads * High quality steel * Adapter with ratchet winches & quick connector * Sturdy metal case with clear PVC insert * Measurements: 34.2 x 21 x 3 cm * Weight: 1.83kg Technical specifications: * M3 x 0.5 mm * M4 x 0.7 mm * M5 x 0.8 mm * M6 x 1.0 mm * M8 x 1.25 mm * M10 x 1.5 mm * M12 x 1.75 mm
Includes:: * 1x Windeisen with ratchet function * 1x T-cutters with turning adapter * 1x T extension * 1x Screwdriver * 2x Adapters


...

For thread sized M5, M6, M7, M8, M9, M10, M11, M12. High-quality chromium-nickel-Nirosta steel provides good internal threads that are resistant to the effects of temperature & corrosion Areas of application: thread reinforcement of materials with low shear strength, e.g. aluminium & magnesium alloys, in machine construction, in automotive & electrical engineering. The damaged threads are drilled out using the twist drills provided. The accommodating thread is cut in the drilled hole using the special taps. The threaded inserts are twisted in, in the thread direction. The screwing tool is removed & the pulling tang is removed using the tang break tool. At the end of this procedure, a thread is produced that, thanks to tight & accurate tolerances & the forming of the threaded inserts, is often better & stronger than the original thread. A real problem solver. For thread

Sizes: M5 x 0.8
- M6 x 1.0
- M8 x 1.25
- M10 x 1.5
- M12 x 1.75. * With 25 threaded inserts of each of the following: M5
- M6 -






...

Suitable for water pipes, air hoses with metal fittings. Simple & safe to use. Wrap threads & join parts together.



...

The three lever monoblock hydraulic control unit is suitable for most tractor & tipper lorry hydraulic systems. With an intelligent design that allows for completely smooth lifting, tilting & maneuvering, this is a must have for precision machines. With a maximum working pressure of 250 bar, it can be attached nearly every type of machine. A built in spring release & pressure release valve. Dimensions: * Overall length: 21 cm *

Width: 17 cm *

Height: 7 cm / with lever 23 cm Flow Rate: 40 l/min, also suitable for tipper lorries. Connections: * A + B: 3/8" internal thread * P + T: 1/2" internal thread



...

The three-chamber light with a practical magnetic base for fast mounting & dismantling. The tail light is not approved for road traffic regulations. Can be used as brake, indicators & tail lights. Dimensions: * Length: 10, 5 cm *

Width: 10.5 cm * Height without magnet: 5 cm * Height with magnet: 8 cm An approx. 7.5 m cable, now with a plug, is included in the delivery.

...

Universally applicable & compact vehicle / trailer lights. The three-chamber light has a practical magnetic base for fast mounting & dismantling. The light is not approved for road traffic regulations. Can be used as brake, indicator & tail lights. Dimensions: Length: 10, 5 cm

Width: 10.5 cm Height without magnet: 5 cm Height with magnet: 8 cm An approx. 7.5 m cable, now with a plug, is included in the delivery.

...