More From Contributor

Ready-to-use, highly elastic one-component sealing compound. The silicone-based, heat-resistant Coltogum sealing compound is perfect for a wide range of applications like automotive & machine repair. It's elasticity & heat resistance make it ideal for sealing & water proofing ducts, chimmneys, funaces, fireplaces & more. Â Features: * Thermostable * Heat resistant up to 300 Â° C
- short term 350 Â° C * Thermo-resistance: from -60 Â° C to + 350 Â° C * Skin formation: approx.Â 10 minutes * Hardening: 4 mm after 48 h * Resistant to smoke & oil * Resistant to weather & agin * UV resistent * Acetic-crosslinking * Odourless after hardening * Highly elastic * Non-varnishable * Silicone based *

Colour: red brown Applications: * Sealing on boilers, heat exchangers, water heaters, & radiators * Sealing & waterproofing of fire resistant glass, fire doors, stove connections, ducts, heaths & chimney construction * Individual seals in engine & machines * Exterior furnace repairs Â Contains: 310 ml Â

...

Archived Product

* Child safe * Scalding protection * Water-saving * Energy-saving. Thermostat enables a precise & effective temperature pre-selection which is always uniform. The temperature is maintained even in the event of pressure variations, so undesirable changes of bath temperature are now a thing of the past. The hot water lockout provides an additional safety measure as it prevents the inadvertent selection of temperatures above 38°C. All taps have a safety lockout at 38°, contamination collection filter & backflow prevention device. Suitable for gas & continuous flow heaters. Surface has bright chrome finish. ...

Archived Product

The grinding stone is used for fine grinding & sharpening steel blades. Due to the fact that kitchen knives are often used & washed again, the knives may gradually become dull. This grinding stone is perfect for returning blades to their original condition. Its two sided design has two different grits for each stage of grinding, both coarse & fine.

Features: * Grits: 360 / 1000 * Dimensions: 200 x 50 x 25 mm

...

Archived Product

All thread cutting tools are made from alloyed tool steel (hardness 59-62 HRC).Â Sturdy mounting tools made from cast steel. Contents: * One of each thread-cutting die M3x 0.5, M4x 0.7, M5x 0.8, M6x 1, M7x 1, M8x 1.25, M10x 1.5, M12x 1.75, NPT 1/8.27 * One of each thread-cutting tap M3x 0.5, M4x 0.7, M5x 0.8, M6x 1, M7x 1, M8x 1.25, M10x 1.5, M12x 1.75, NPT1/8.27 * 1 thread-cutting die holder * 1 tap wrench Comes supplied in a metal box. ...

Archived Product

Suitable for internal & external threads Ensure that your joins, fittings acrews & bars have well maintained thread with this amazing set. By repairing your threads, you ensure that all joins are perfectly secure, providing extra safety & durability. Content: Cutting tools: M3 / M4 / M5 / M6 / M8 / M10 / M12 Adjustable winch: 1 Â½" Cutting rings: 25 mm diameter M3 / M4 / M5 / M6 / M8 / M10 / M12 Cutting tool holder: 25 x 9

Material: HSSDIN 352B / EN22568

...

Archived Product

For thread sized M5, M6, M7, M8, M9, M10, M11, M12. High-quality chromium-nickel-Nirosta steel provides good internal threads that are resistant to the effects of temperature & corrosion Areas of application: thread reinforcement of materials with low shear strength, e.g. aluminium & magnesium alloys, in machine construction, in automotive & electrical engineering. The damaged threads are drilled out using the twist drills provided. The accommodating thread is cut in the drilled hole using the special taps. The threaded inserts are twisted in, in the thread direction. The screwing tool is removed & the pulling tang is removed using the tang break tool. At the end of this procedure, a thread is produced that, thanks to tight & accurate tolerances & the forming of the threaded inserts, is often better & stronger than the original thread. A real problem solver. For thread

Sizes: M5 x 0.8
- M6 x 1.0
- M8 x 1.25
- M10 x 1.5
- M12 x 1.75. * With 25 threaded inserts of each of the following: M5
- M6 -

...

Archived Product

Suitable for water pipes, air hoses with metal fittings. Simple & safe to use. Wrap threads & join parts together.

...

Archived Product

The three lever monoblock hydraulic control unit is suitable for most tractor & tipper lorry hydraulic systems. With an intelligent design that allows for completely smooth lifting, tilting & maneuvering, this is a must have for precision machines. With a maximum working pressure of 250 bar, it can be attached nearly every type of machine. A built in spring release & pressure release valve. Dimensions: * Overall length: 21 cm *

Width: 17 cm *

Height: 7 cm / with lever 23 cm Flow Rate: 40 l/min, also suitable for tipper lorries. Connections: * A + B: 3/8" internal thread * P + T: 1/2" internal thread

...

Archived Product

The three-chamber light with a practical magnetic base for fast mounting & dismantling. The tail light is not approved for road traffic regulations. Can be used as brake, indicators & tail lights. Dimensions: * Length: 10, 5 cm *

Width: 10.5 cm * Height without magnet: 5 cm * Height with magnet: 8 cm An approx. 7.5 m cable, now with a plug, is included in the delivery.

...

Archived Product

Thread Cutting Set, With Ratchet, 20 Pieces Westfalia

With your new 20-piece Westfalia tapping cutter set with ratchet you now have everything you need for professional tapping. With this high-quality set, they always have the best results. Features: * Extensive set * For internal and external threads * High quality steel * Adapter with ratchet winches and quick connector * Sturdy metal case with clear PVC insert * Measurements: 34.2 x 21 x 3 cm * Weight: 1.83kg Technical specifications: * M3 x 0.5 mm * M4 x 0.7 mm * M5 x 0.8 mm * M6 x 1.0 mm * M8 x 1.25 mm * M10 x 1.5 mm * M12 x 1.75 mm Includes: * 1x Windeisen with ratchet function * 1x T-cutters with turning adapter * 1x T extension * 1x Screwdriver * 2x Adapters

Availability: Out Of Stock
Supplier: Westfalia Mail Order
SKU: 880371

Description Reviews / Comments Add New

Product Description

With your new 20-piece Westfalia tapping cutter set with ratchet you now have everything you need for professional tapping. With this high-quality set, they always have the best results.

Features: * Extensive set * For internal & external threads * High quality steel * Adapter with ratchet winches & quick connector * Sturdy metal case with clear PVC insert * Measurements: 34.2 x 21 x 3 cm * Weight: 1.83kg Technical specifications: * M3 x 0.5 mm * M4 x 0.7 mm * M5 x 0.8 mm * M6 x 1.0 mm * M8 x 1.25 mm * M10 x 1.5 mm * M12 x 1.75 mm
Includes:: * 1x Windeisen with ratchet function * 1x T-cutters with turning adapter * 1x T extension * 1x Screwdriver * 2x Adapters

Reviews/Comments

Add New

Jargon Buster

PVC - Polyvinyl Chloride - A type of insulating plastic

Steel - An alloy made predominately of Iron combined with <2% carbon

Cm - Centimetres, one centimetre is equal to 10 milimetres

screwdriver - A tool for driving screws. May be rotated manually or by electric motor.

weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz

professional - A term used to describe products or people which may be focused on specialist educational training

cutting - The seperation of an object usually using a cutting tool such as a knife

Quality - An object that has quality is superior in function and finish than a less quality object.

Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.

Quick - Something that is fast

Professional - A person that is trained within a profession.

Extension - Something that is made bigger through adding to it, for example a conservatory extension on a house.

technical - Something that relates to a good level of skill and methods.

Sturdy - something hat is very stable and is solidly built.

Supplier Information

Westfalia Mail Order

This mail order company started out back in 1928 selling agricultural products in Shwerte, Germany. The company was founded by the Aschermann family and soon became the best and the cheapest place to purchase tool supplies. The company launched their mail order service in 1932 and produced its first catalogue in 1933. The company continued to grow in the post war era and established itself as a one stop shop for high quality tools. Today Westfalia has distribution centres in four different countries and still produces a catalogue supplying high quality products to the general public and professionals alike. They created their online mail order service 10 years ago and continue to grow. They now offer electronics, car accessories, gardening supplies, household products, industrial clothing and bicycle accessories.

More From Contributor

Thread Cutting Set, With Ratchet, 20 Pieces Westfalia

Product Description

Reviews/Comments

Add New

Intelligent Comparison

Price History

Vouchers

Facebook

Jargon Buster

Supplier Information

Community Generated Product Tags

Contact Us

Information

My Account