Porcupipe is a simple, but extremely effective device designed to keep virtually any water gutter system clear & free from all kinds of debris including moss & leaves. Porcupipe can also help to prevent entry of birds into roof space, & can also help to keep out twigs & seeds dropped by birds. It is made from high quality Polypropylene filaments securely fixed into a flexible central rust-free stainless steel core. Porcupipe is different from other devices that just cover your gutters
- Porcupipe actually fits inside & fills the gutter, effectively screening your gutters from debris, whilst keeping them clear for water to flow freely. The highly flexible top filaments of Porcupipe fit snugly under roofing, helping to anchor it securely in place whilst the side & base filaments fill the gutter space to keep debris out. Porcupipe will flex to fit virtually any shaped gutter system. Put an end to the annual task of clearing gutters
- simply fit Porcupipe & forget it! Fitting Porcupipe is simple & once in place should be practically maintenance free. Once fitted, Porcupipe becomes practically undetectable, helping to maintain the appearance of your property. Porcupipe can also be fitted to ACO style path & driveway drains. Porcupipe is available in Black, Brown & White.

...

This Portable 230v Self-Priming Water Butt Pump is an ideal pump to use if your tank has limited access & installing a submersible pump is not a practical solution. This green & black pump can work at 4 bar pressure & will be good for watering the garden & also the light pressure washing jobs. The pump can be installed on top of the tank & if you install the suction strainer just off the bottom of the tank the pump will draw clean water without any of the silt from the bottom of the tank. It¢‚¬„¢s also a portable, single stage & self-priming jet pump with a thermoplastic body, venturi & impeller. The stainless steel shaft is fitted with a carbon ceramic & NBR mechanical seal, the IP44 motor has water resistant rocker switch & overload protection & it¢‚¬„¢s designed for pumping clean water only, at a maximum temperature of 35‚ºC. It should not be allowed to run dry, but by fitting an optional pressure controller it can be protected from this & also start & stop automatically. Maximum recommended suction lift, when primed, is 8 metres. If you are performing a suction lift we recommend that a foot-valve & strainer should be fitted to the end of the suction hose. This is included with our 4 metre suction kit. These are available as an optional extra & include a pump coupling, which is factory fitted to the hose for a vital, airtight connection. Fitted as standard with a carrying handle & a 2 metre rubber power lead. This pump is ideal for transfer & irrigation duties in domestic & light industrial applications. Product Specification: Run Type: 25mm Outlet Diameter 25mm Flow: 60 L/min Total Head: 42m Free Passage: 0mm Voltage: 230 Kw: 0.8kw Dry Weight: 7.5 Kgs Diameter: 235mm

Height: 290mm Product Specification: Run Type: 25mm Outlet Diameter 25mm Flow: 60 L/min Total Head: 42m Free Passage: 0mm Voltage: 230 Kw: 0.8kw Dry Weight: 7.5 Kgs Diameter: 235mm 
Height: 290mm


...

This Portrait Rusted Metal Bumblebee Silhouette Mirror will make a great addition to any garden & add some real style & character.  Bound to catch the eye of friends & family when they visit & become a real talking point.  Suitable for indoor & outdoor use. Dimensions:118.125cm x 58.75cm x 1.25cm ...

This Portrait Rusted Metal Butterfly Garden Mirror will make a great addition to any garden & add some real style & character.  Bound to catch the eye of friends & family when they visit & become a real talking point.  Suitable for indoor & outdoor use. Dimensions:
Size: 118cm x 59cm x 2cm
...

This Portrait Rusted Metal Dragonfly Silhouette Mirror will make a great addition to any garden & add some real style & character. Bound to catch the eye of friends & family when they visit & become a real talking point.  Suitable for indoor & outdoor use. Dimensions:118.1cm x 58.7cm x 1.2cm ...

This pressure-controlled, self-priming 12v water butt pump has a built in pressure switch which senses the water pressure in the discharge pipework. If the pressure drops in the pipework the pressure switch senses this & starts the pump, when the pressure in the pipework is increased to the setting of the pressure switch the pump stops, this is done automatically. It is important to be sure there are no leaks in the discharge pipework, if you have any leaks the pump will continue to stop & start when there is no dem&. This pump is suitable where rainwater is being recycled for domestic appliances. This pump can be used to provide toilet cisterns & washing machines with water. It can be connected direct to the cistern (s) of a toilet & will automatically switch on when the toilet is flushed. Alternatively the pump can be used to fill a storage tank which in turn feeds the cisterns on the toilets in the house or office. The pump comes complete with suction strainer. The power for this pump is provided by a battery & a mains electric AC/DC charger, which is supplied with the pump. If the pump is pumping directly to a toilet cistern or washing machine it is advisable to install an expansion vessel into the discharge line of the pump. If unsure, please contact us. Connections: for 13mm (½”) bore hose or Hep 20 push-fit connectors CW193 Dimensions: 230mm long, 152mm wide, 110mm high Fuse

Size: 10 amp Maximum Current: 3.5 amp Output: 7 litres/minute (1.5 gallons/minute) open flow PRESSURE SWITCH
- cuts in at 1.0bar (15psi)
- cuts out at 1.7bar (25psi) Efficient, high-flow, self-priming pump serving 2 or more outlets Multi-diaphragm design self primes to 1.8m vertical lift, can run dry without damage Supplied with snap-in ports for hose or Hep 20 connectors Inline suction strainer Quiet running Motor protected by automatic thermal overload cut-out

Includes:: bypass feature to provide smooth, quiet flow. Subject to the type of cistern shut off you have, it may be necessary to install a small expansion vessel on the discharge side of the pump to prevent hunting of the pump if the valve on the ball cock closes slowly. Packaged Dimensions: L:17.00 x H:11.00 x W:34.00cm Actual Weight: 1.60kg (approx 2.10kg packed) AC/DC 12V Triple charger 12V Battery  





...

These controllers are electronic pressure switches for submersible pumps & for surface mounted pumps, which have sufficient rated

...

Robust, high quality Anvil Secateur with cushion grip. Ideal for the professional gardener. ...

Maintenance As with all cast iron products, this statue will continue to gently develop its own unique patina. Depending on positioning & environment, this can include mossing & general weathering. In order to begin this process, we store these statues outside. As rust forms its own seal, decades of service are ensured. Whilst a weathered look is generally preferred, a uniform finish can be achieved by priming & spraying or painting as required.

Dimensions & Weight (Approx.) LIO007: H.98cm x D.47cm x L.73cm

...

Puddle Duck cast in iron, made by professionals. Here to give your home a more cultural style. This piece is perfect to enhance any garden to add character to any location around your garden. If you are looking for a piece to spread a feeling of happiness & fun,  this is the perfect item for you. This is also the perfect gift for a family or friend!

Dimensions & Weight (Approx.) DUCK002: H.27cm x D.33cm x W.17cm
- 9kg


...