Wheelbarrow Fitment Type:
Key
Features:
This Portable 230v Self-Priming Water Butt Pump is an ideal pump to use if your tank has limited access & installing a submersible pump is not a practical solution. This green & black pump can work at 4 bar pressure & will be good for watering the garden & also the light pressure washing jobs. The pump can be installed on top of the tank & if you install the suction strainer just off the bottom of the tank the pump will draw clean water without any of the silt from the bottom of the tank. It¢‚¬„¢s also a portable, single stage & self-priming jet pump with a thermoplastic body, venturi & impeller. The stainless steel shaft is fitted with a carbon ceramic & NBR mechanical seal, the IP44 motor has water resistant rocker switch & overload protection & it¢‚¬„¢s designed for pumping clean water only, at a maximum temperature of 35‚ºC. It should not be allowed to run dry, but by fitting an optional pressure controller it can be protected from this & also start & stop automatically. Maximum recommended suction lift, when primed, is 8 metres. If you are performing a suction lift we recommend that a foot-valve & strainer should be fitted to the end of the suction hose. This is included with our 4 metre suction kit. These are available as an optional extra & include a pump coupling, which is factory fitted to the hose for a vital, airtight connection. Fitted as standard with a carrying handle & a 2 metre rubber power lead. This pump is ideal for transfer & irrigation duties in domestic & light industrial applications. Product Specification: Run Type: 25mm Outlet Diameter 25mm Flow: 60 L/min Total Head: 42m Free Passage: 0mm Voltage: 230 Kw: 0.8kw Dry Weight: 7.5 Kgs Diameter: 235mm
Height: 290mm Product Specification: Run Type: 25mm Outlet Diameter 25mm Flow: 60 L/min Total Head: 42m Free Passage: 0mm Voltage: 230 Kw: 0.8kw Dry Weight: 7.5 Kgs Diameter: 235mm
Height: 290mm