USB 3.0 is the new super speed standard for hardware & cables supporting speed up to 5 Gbps. Our PCIe USB (Universal Serial Bus) 3.0 cards are built to

Specification & uses either of the PCI Express slots on your motherboard. Due to hardware restrictions actual speeds may vary.

Specification Compliant with USB (Universal Serial Bus) 3.0

Specification REV 1.0. Compliant with USB (Universal Serial Bus) 3.0 (5 Gbps) 2.0 (480 Mbps) & USB (Universal Serial Bus) 1.1 (12 Mbps)

Specification. Supports USB (Universal Serial Bus) legacy function. Compliant with PCI Express

Specification 2.0. Supports 4 Pin power socket for floppy drive power connector. Each USB (Universal Serial Bus) 3.0 connector supports up to 900 Ma. Compatible with Windows XP Vista & Windows 7/8/8.1/10









...

The 99CDL-8 range of " Super Speed USB" Type A (male) to Type B (male) cables support a data transfer rate up to 5 Gbit/s (625 MB/s) which is about ten times faster than USB (Universal Serial Bus) 2.0 technology. This is a Type A to A cable; it is designed to connect a Host to a Device. These cables are often used to connect a Host computer to a faceplate with a Type A socket. Please note: This is not used to connect two computers together. Attempting to do so may damage equipment. The official name for this cable would be USB3.2 Gen 1. (Previously known as USB3.1 Gen 1 & USB (Universal Serial Bus) 3.0) Specification: Type A (male) to Type A (male) 5 Gbs Super Speed USB (Universal Serial Bus) USB 3.0 data cable Backwards compatible with USB2.0 & 1.1 30/24AWG conductors Nickel plated connectors ...

The 99CDL-8 range of " Super Speed USB" Type A (male) to Type B (male) cables support a data transfer rate up to 5 Gbit/s (625 MB/s) which is about ten times faster than USB (Universal Serial Bus) 2.0 technology. This is a Type A to A cable; it is designed to connect a Host to a Device. These cables are often used to connect a Host computer to a faceplate with a Type A socket. Please note: This is not used to connect two computers together. Attempting to do so may damage equipment. The official name for this cable would be USB3.2 Gen 1. (Previously known as USB3.1 Gen 1 & USB (Universal Serial Bus) 3.0) Specification: Type A (male) to Type A (male) 5 Gbs Super Speed USB (Universal Serial Bus) USB 3.0 data cable Backwards compatible with USB2.0 & 1.1 30/24AWG conductors Nickel plated connectors Length 2m ...

The 99CDL-8 range of " Super Speed USB" Type A (male) to Type B (male) cables support a data transfer rate up to 5 Gbit/s (625 MB/s) which is about ten times faster than USB (Universal Serial Bus) 2.0 technology. This is a Type A to A cable; it is designed to connect a Host to a Device. These cables are often used to connect a Host computer to a faceplate with a Type A socket. Please note: This is not used to connect two computers together. Attempting to do so may damage equipment. The official name for this cable would be USB3.2 Gen 1. (Previously known as USB3.1 Gen 1 & USB (Universal Serial Bus) 3.0) Specification: Type A (male) to Type A (male) 5 Gbs Super Speed USB (Universal Serial Bus) USB 3.0 data cable Backwards compatible with USB2.0 & 1.1 30/24AWG conductors Nickel plated connectors Length 3m ...

The 99CDL-8 range of " Super Speed USB" Type A (male) to Type B (male) cables support a data transfer rate up to 5 Gbit/s (625 MB/s) which is about ten times faster than USB (Universal Serial Bus) 2.0 technology. This is a Type A to A cable; it is designed to connect a Host to a Device. These cables are often used to connect a Host computer to a faceplate with a Type A socket. Please note: This is not used to connect two computers together. Attempting to do so may damage equipment. The official name for this cable would be USB3.2 Gen 1. (Previously known as USB3.1 Gen 1 & USB (Universal Serial Bus) 3.0) Specification: Type A (male) to Type A (male) 5 Gbs Super Speed USB (Universal Serial Bus) USB 3.0 data cable Backwards compatible with USB2.0 & 1.1 28/22AWG conductors Nickel plated connectors Length 5m ...

The 99CDL-82 range of Super Speed USB (Universal Serial Bus) Type A (male) to Type A (female) cables support a data transfer rate up to 5 Gbit/s (625 MB/s) which is about ten times faster than USB (Universal Serial Bus) 2.0 technology. This is a standard Type A male to female cable; it is designed to increase the length of another USB3.0 cable. The official name for this cable would be USB3.2 Gen 1. (Previously known as USB3.1 Gen 1 & USB (Universal Serial Bus) 3.0) Specification: USB (Universal Serial Bus) 3 Extension Cable Type A (male) to Type A (female) 5 Gbs Super Speed USB (Universal Serial Bus) Backwards compatible with USB2.0 & 1.1 30/24AWG conductors Length 3m ...

The 99CDL-82 range of Super Speed USB (Universal Serial Bus) Type A (male) to Type A (female) cables support a data transfer rate up to 5 Gbit/s (625 MB/s) which is about ten times faster than USB (Universal Serial Bus) 2.0 technology. This is a standard Type A male to female cable; it is designed to increase the length of another USB3.0 cable. The official name for this cable would be USB3.2 Gen 1. (Previously known as USB3.1 Gen 1 & USB (Universal Serial Bus) 3.0) Specification: USB (Universal Serial Bus) 3 Extension Cable Type A (male) to Type A (female) 5 Gbs Super Speed USB (Universal Serial Bus) Backwards compatible with USB2.0 & 1.1 28/22 AWG conductors Length 5m ...

The USB (Universal Serial Bus) 3.0 Ethernet Adapter allows a users computer to instantly connect to a 10/100/1000 Mbps network through an existing USB (Universal Serial Bus) port. There is no need to purchase an extra Gigabit network card that uses a PCI or Card Bus slot. With compliance to USB (Universal Serial Bus) 3.0

Specification this adapter ensures true 10 / 100 / 1000 Mbps network speed without any compromise. The USB (Universal Serial Bus) bus-powered design means external power is not required. Specification: USB (Universal Serial Bus) 3.0 to 10 / 100 / 1000 Mbps Gigabit Ethernet Supports all USB (Universal Serial Bus) 3.0 power saving models Supports Wake-on-LAN function Supports Green Ethernet Supports IEEE 802.3az (Energy Efficient Ethernet) Supports IP v 4 / IP v 6 pack Checksum Offload Engine (COE) to reduce CPU loading System Requirements: Windows XP Windows 7 Windows 8 Windows 8.1 Mac OS Package Contents: 1x Gigabit USB (Universal Serial Bus) 3.0 Ethernet adapter CD (Driver & user manual) Quick Installation Guide

...

The 88USB (Universal Serial Bus)-954 is a gender changing coupler used to couple a type A male & a type B male together.



...

Our USB (Universal Serial Bus) C Display Port MST adapter means that you can connect two Display Port monitors to a source with a USB (Universal Serial Bus) C port. MST functionality allows the two screens to act independently of each other in extend mode this adapter also supports mirror mode. MST adapters are more suitable for laptops & computers that have limited ports such as 1 USB (Universal Serial Bus) C port. This adapter means that you can connect two computer screens with 4k@60 Hz to your Laptop/computer. When using just one port on the adapter you can achieve 8k@30 Hz. For full functionality the source must have a USBC DP Alt mode v 1.4.

Specification Dual Display Port 4k@60 Hz Single Port 8k@30 Hz 32.4 Gbps Bandwidth USB (Universal Serial Bus) C to 2x Displayport female Supports MST Supports HDR Supports DSC 1.2 Supports HDCP 2.2 Supports 4:4:4 subsampling Supports 8/10/12 bit colour depth

...