The USB2-SERIALDUAL is a USB (Universal Serial Bus) to Serial RS-232 Cable provides 2 RS-232 Serial (DB-9 male) connectors via one standard USB (Universal Serial Bus) port. You can instantly enjoy connectivity with your Modem PDA POS or other serial devices on your PC or Mac without the hassle of opening your computer case. It provides a quick simple & cost-effective solution & is ideal for various communication & automation applications. Specification: Compatible with USB (Universal Serial Bus)

Specification v 1.1 & v 2.0 (Full-Speed). Supports 2 port Serial ports at the same time. Supports all common RS-232 Serial Port. Automatic USB (Universal Serial Bus) Protocol handling. Supports remote wake-up & power management. USB (Universal Serial Bus) bus powered no external power supply required. Prolific PL2303HXD Chipset System Requirements: Available USB (Universal Serial Bus) port Windows 2000 Windows XP Windows Vista Windows 7 8 10 & 11 Mac 10.4/5

...

The USB2-DVI adaptor allow users to add additional DVI-D monitors to a PC up to a maximum of six (using six products). Installation is easy install driver connect a monitor to the unit then connect to the PC then you’re ready to enjoy multiple windows on the multiple monitors. The connected monitor (s) can be configured to either clone your primary screen or extend the Windows desktop allowing visibility of more applications at the same time. Specification Add up to 6 additional units Supports DVI-D output Supports resolutions up to 1280 x 1024 @ 32-bit colour mode Attached USB (Universal Serial Bus) type A cable Nickel connectors Plastic housing Supports Windows XP SP2 (32-bit) Vista & Win 7 (32 & 64-bit
- Win 7 driver on download tab) Contents:1 x USB (Universal Serial Bus) 2.0 to DVI adaptor 1 x Driver CD 1 x User Manual System Requirements:PC with 1.2 GHz or higher Processor 512 Megabytes of RAM At least one USB (Universal Serial Bus) 2.0 port 30 MB of available disk space Super VGA (800 x 600) or higher resolution video card & monitor CD-ROM or DVD drive. The minimum hardware requirements for a PC capable of displaying a DVD on the monitor with the DVI Adaptor connected are:PC with Dual CPUs & 2.0 GHz processor 512 Megabytes of RAM or more if other applications are to running Set the resolution of monitor with the DVI Adapter connected to 800 x 600 @ 16 bit colour. The included software can be installed on any desktop or laptop system running Windows XP (Service Pack 2) Home or Professional. There is no driver support for other platform or previous Windows versions. USB (Universal Serial Bus) 2.0 Hi-Speed Add up to 6 xtra Vi U units Auto enumerated without settings IDs Fully support either VGA or DVI interface (VCUB series supports BOTH VGA & DVI interface & both of the simultaneously) Supports resolution up 1280 x 1024 8 or 16 Bit
...

The USB2-DVI adaptor allow users to add additional DVI-D monitors to a PC up to a maximum of six (using six products). Installation is easy install driver connect a monitor to the unit then connect to the PC then you’re ready to enjoy multiple windows on the multiple monitors. The connected monitor (s) can be configured to either clone your primary screen or extend the Windows desktop allowing visibility of more applications at the same time. Specification Add up to 6 additional units Supports DVI-D output Supports resolutions up to 1600 x 1200 @ 32-bit colour mode Attached USB (Universal Serial Bus) type A cable Nickel connectors Plastic housing Support Windows XP SP2 (32-bit) Vista & Win 7 (32 & 64-bit) Contents:1 x USB (Universal Serial Bus) 2.0 to DVI adaptor 1 x Driver CD 1 x User Manual System Requirements:PC with 1.2 GHz or higher Processor 512 Megabytes of RAM At least one USB (Universal Serial Bus) 2.0 port 30 MB of available disk space Super VGA (800 x 600) or higher resolution video card & monitor CD-ROM or DVD drive. The minimum hardware requirements for a PC capable of displaying a DVD on the monitor with the DVI Adaptor connected are:PC with Dual CPUs & 2.0 GHz processor 512 Megabytes of RAM or more if other applications are to running Set the resolution of monitor with the DVI Adaptor connected to 800 x 600 @ 16 bit colour. The included software can be installed on any desktop or laptop system running Windows XP (Service Pack 2) Home or Professional. There is no driver support for other platform or previous Windows versions. USB (Universal Serial Bus) 2.0 Hi-Speed Add up to 6 xtra Vi U units Auto enumerated without settings IDs Fully support either VGA or DVI interface (VCUB series supports BOTH VGA & DVI interface & both of the simultaneously) Supports resolution up 1600 x 1200 8 or 16 Bit ...

The USB (Universal Serial Bus)-954 is a gender changing coupler used to couple a type A male & a type B male together.



...

The USB2-952 gender changer is used for converting a standard type A plug into a type B plug for use with devices such as USB (Universal Serial Bus) 2.0 printers scanners etc. Specification :USB 2.0 compatible Gold contacts Nickel Connectors Gender Changer USB (Universal Serial Bus) 2.0 A Type Socket
- B Type Plug
...

The USB2-3010HUB is a USB (Universal Serial Bus) 2.0 10 port hub that is quick & easy to install with driverless installation by taking advantage of Windows & MAC built in USB (Universal Serial Bus) drivers. Specification:8 mounted & 2 foldable 480 Mbps ports. Works seamlessly with your USB1.1 & USB2.0 devices. Slim design saves desk space. Supports hot swapping of all your USB (Universal Serial Bus) devices. Backwards compatible with USB1.1. Supports data transfer rate at 1.5/12/480 Mbps. Plug n Play. Requirements: System running USB (Universal Serial Bus) 2.0.1 Free USB (Universal Serial Bus) 2.0 Port.MAC OS 8.6 & above. Windows 98SE 2000 ME XP Vista Win 7. Contents 10 Port USB (Universal Serial Bus) 2.0 Hub 2.5amp Power Adaptor USB Cable ...

The USB2-PCICOMBO has a USB (Universal Serial Bus) 2.0 & IEEE 1394a (Firewire 400) slot this allows the user to have both USB (Universal Serial Bus) 2.0 & IEEE 1394a connection types on one PCI Card. Running at 480 Mbps the USB (Universal Serial Bus) 2.0 connection is slightly faster than the Firewire connection but both have different uses. The USB2-PCICOMBO houses 2x external & 2x internal USB (Universal Serial Bus) 2.0 ports & 1x 4 pin & 1x 6pin external firewire (IEEE-1394) ports. Specification: Compliant with Universal Serial Bus Revision 2.0. Supports Data Transfer Rates of 1.5/12/480 Mbps. Compliant with Open Host Controller Interface

Specification for USB (Universal Serial Bus) Revision 1.1. Compliant with Enhanced Host Controller Interface

Specification USB (Universal Serial Bus) 2.0 Revision 0.95. Hot-Plug feature means that you can connect/disconnect devices without powering down the system.32-Bit 33 Mhz host interface compliant to PCI

Specification release 2.2. Supports PCI-Bus Power Management interface

Specification release 1.1. Max. 5v/500 m A Power Supply. Supports Windows 98/SE/2000/ME/XP (Needs Service Pack 1)IEEE 1394a (Firewire 400) with data transfer rates of up to 400 Mb/s. Complies with Standard for IEEE 1394 High Performance Serial Bus. Works with many DV Camcorders for digital video creating/editing. Hot-Plug feature means that you can connect/disconnect devices without powering down the system. Supports Plug & Play

Specification. Connect up to 63 devices. 2x External & 2x Internal USB (Universal Serial Bus) 2.0 Ports 1x 4 Pin & 1x 6 Pin External Firewire (IEEE-1394) VIA Chipset for PC use only Compliant with Universal Serial Bus Revision 2.0 Supports Data Transfer Rates of 1.5/12/480 Mbps Compliant with Open Host Controller Interface

Specification for USB (Universal Serial Bus) Revision 1.1 Compliant with Enhanced Host Controller Interface

Specification USB (Universal Serial Bus) 2.0 Revision 0.95 Hot-Plug feature means that you can connect/disconnect devices without powering down the system. 32-Bit 33 Mhz host interface compliant to PCI

Specification release 2.2 Supports PCI-Bus Power Management interface

Specification release 1.1 Max. 5v/500 m A Power Supply Supports Windows 98/SE/2000/ME/XP (Needs Service Pack 1) IEEE 1394a (Firewire 400) with data transfer rates of up to 400 Mb/s. Complies with Standard for IEEE 1394 High Performance Serial Bus. Works with many DV Camcorders for digital video creating/editing. Hot-Plug feature means that you can connect/disconnect devices without powering down the system. Supports Plug & Play

Specification Connect up to 63 devices



















...

High performance USB2.0 over CAT5 extender compliant with USB2.0

Specification (up to 480 Mb/s). With this device

...

The USB2-SERIALQUAD is a USB (Universal Serial Bus) to Serial RS-232 Cable provides 4 RS-232 Serial (DB-9 male) connectors via one standard USB (Universal Serial Bus) port. You can instantly enjoy connectivity with your Modem PDA POS or other serial devices on your PC or Mac without the hassle of opening your computer case. It provides a quick simple & cost-effective solution & is ideal for various communication & automation applications. Specification Compatible with USB (Universal Serial Bus)

Specification v 1.1 & v 2.0 (Full-Speed) Supports 2/4 port Serial ports at the same time. Supports all common RS-232 Serial Port. Automatic USB (Universal Serial Bus) Protocol handling. Supports remote wake-up & power management.USB bus powered no external power supply required. System Requirements: Available USB (Universal Serial Bus) port Windows 2000 Windows XP Windows Vista Windows 7 (32 & 64-bit) Mac 10.4/5

...

The USB (Universal Serial Bus) 2.0 to VGA Adapter allows the user to mirror or extend their current PC or laptop desktop across another monitor up to resolutions of 1680 x 1050 @ 32 bits on a VGA/SVGA monitor. You can use up to 6 displays on one computer with a minimum

Specification of Intel/AMD Dual Core 1.8 Ghz with 1GB or more memory. A single display can be run on as little as a single core 1.2 Ghz computer with 512MB of memory.

Specification: Display up to 6 displays with additional adapters on one PC Mirror Extend Primary or off modes USB (Universal Serial Bus) 2.0 Hi-Speed Supports 1600 x 1200 max resolution Supports 16/32 bit colour 50cm molded USB (Universal Serial Bus) 2.0 cable Compatible with Windows 10 8.1 8 7 & XP System requirements: Minimum: Windows based computer Intel/AMD single core 1.5 Ghz or higher CPU RAM: 512mb or higher Recommended: Windows based computer Intel/AMD dual core 2.0 Ghz or higher CPU RAM: 2gb or higher



...