The 4x 2 HDMI Matrix routes high definition video in multiple resolutions up to 4K x 2K UHD plus multichannel digital audio from any of the four HDMI sources to two displays. It works with HDMI equipped devices such as Blu-Ray PS3s XBox 360 Sky HD Virgin HD Freeview HD & Freesat etc. Every source is accessible at all times to any display by selecting it with the IR remote. Two outputs give you the choice of sending high definition audio & video signals to two independent displays. Any four to any two matrix switching allows for maximum versatility for integrated systems. It eliminates the needing of disconnects & reconnects sources to a display equipped with one input.

Specification Switches easily between any 4 HDMI sources Distributes any of the four inputs to any combination of the 2 HDMI output displays Supports 4K x 2K resolution (UHD) Ultra High Definition Supports 1080p (HD) Supports 340 M Hz/3.4 Gbps per channel (10.2 Gbps all channel) bandwidth Supports 12bit per channel (36bit all channel) deep color. Supports HDCP Supports uncompressed audio Supports all 3D formats including 1080p@23.98/24 Hz & 720p@59.94/60 Hz/50 Hz Contents 4x 2 UHD HDMI Matrix Switch Remote Control PSU: 5v 2 Amp Quick Installation Guide

...

The USB2-222 is a 4 Port USB (Universal Serial Bus) 2.0 Compliant Hub allows up to 4 USB (Universal Serial Bus) 1.1 or 2.0 Devices to be connected to you computer. It supports the High Speed transmission rate of up to 480 Mbps & is fully backward compatible with USB (Universal Serial Bus) revision 1.1 devices. The USB2-222 makes an excellent solution for those wanting to maximise the USB (Universal Serial Bus) intake of their PC. Specification 4 USB (Universal Serial Bus) 2.0 Ports up to 100m A per port or up to 500m A (with power adapter) Supports over current protection on each port. Provides 4 Type A Female & 1 Type B Female Connectors. Supports High-Speed (480 Mbps) Full-Speed (12 Mbps) & Low-Speed (1.5 Mbps) Compliant with USB (Universal Serial Bus)

Specification Revision 2.0. Chains up to 127 USB (Universal Serial Bus) devices Power LED to indicate Self-power or Bus Power. Supports Plug & Play Contents 4 Port USB (Universal Serial Bus) 2.0 Hub 80cm USB (Universal Serial Bus) cable type A to B PSU

...

The USB2-129 is a PCI faceplate to fit into the case of a desktop PC providing an additional female firewire & USB (Universal Serial Bus) 2.0 type A ports tailing off to male firewire & USB (Universal Serial Bus) 2.0. Specification:1x IEEE-1394A 6 Pin Male
- 6 Pin Female.1x USB (Universal Serial Bus) 2.0 Type A Male
- Type A Female. Mounted on PCI Faceplate. 1x IEEE-1394A 6 Pin Male
- 6 Pin Female 1x USB (Universal Serial Bus) 2.0 Type A Male
- Type A Female Mounted on PCI Faceplate



...

The USB2-122 is a USB (Universal Serial Bus) 2.0 A female
- A female extension cable USB 2.0 B Male
- B Female (Faceplate Mount)

...

The USB2-122 is a USB (Universal Serial Bus) 2.0 A female
- A female extension cable USB 2.0 B Male
- B Female (Faceplate Mount)

...

The USB2-SERIALDUAL is a USB (Universal Serial Bus) to Serial RS-232 Cable provides 2 RS-232 Serial (DB-9 male) connectors via one standard USB (Universal Serial Bus) port. You can instantly enjoy connectivity with your Modem PDA POS or other serial devices on your PC or Mac without the hassle of opening your computer case. It provides a quick simple & cost-effective solution & is ideal for various communication & automation applications. Specification: Compatible with USB (Universal Serial Bus)

Specification v 1.1 & v 2.0 (Full-Speed). Supports 2 port Serial ports at the same time. Supports all common RS-232 Serial Port. Automatic USB (Universal Serial Bus) Protocol handling. Supports remote wake-up & power management. USB (Universal Serial Bus) bus powered no external power supply required. Prolific PL2303HXD Chipset System Requirements: Available USB (Universal Serial Bus) port Windows 2000 Windows XP Windows Vista Windows 7 8 10 & 11 Mac 10.4/5

...

The USB2-DVI adaptor allow users to add additional DVI-D monitors to a PC up to a maximum of six (using six products). Installation is easy install driver connect a monitor to the unit then connect to the PC then you’re ready to enjoy multiple windows on the multiple monitors. The connected monitor (s) can be configured to either clone your primary screen or extend the Windows desktop allowing visibility of more applications at the same time. Specification Add up to 6 additional units Supports DVI-D output Supports resolutions up to 1280 x 1024 @ 32-bit colour mode Attached USB (Universal Serial Bus) type A cable Nickel connectors Plastic housing Supports Windows XP SP2 (32-bit) Vista & Win 7 (32 & 64-bit
- Win 7 driver on download tab) Contents:1 x USB (Universal Serial Bus) 2.0 to DVI adaptor 1 x Driver CD 1 x User Manual System Requirements:PC with 1.2 GHz or higher Processor 512 Megabytes of RAM At least one USB (Universal Serial Bus) 2.0 port 30 MB of available disk space Super VGA (800 x 600) or higher resolution video card & monitor CD-ROM or DVD drive. The minimum hardware requirements for a PC capable of displaying a DVD on the monitor with the DVI Adaptor connected are:PC with Dual CPUs & 2.0 GHz processor 512 Megabytes of RAM or more if other applications are to running Set the resolution of monitor with the DVI Adapter connected to 800 x 600 @ 16 bit colour. The included software can be installed on any desktop or laptop system running Windows XP (Service Pack 2) Home or Professional. There is no driver support for other platform or previous Windows versions. USB (Universal Serial Bus) 2.0 Hi-Speed Add up to 6 xtra Vi U units Auto enumerated without settings IDs Fully support either VGA or DVI interface (VCUB series supports BOTH VGA & DVI interface & both of the simultaneously) Supports resolution up 1280 x 1024 8 or 16 Bit
...

The USB2-DVI adaptor allow users to add additional DVI-D monitors to a PC up to a maximum of six (using six products). Installation is easy install driver connect a monitor to the unit then connect to the PC then you’re ready to enjoy multiple windows on the multiple monitors. The connected monitor (s) can be configured to either clone your primary screen or extend the Windows desktop allowing visibility of more applications at the same time. Specification Add up to 6 additional units Supports DVI-D output Supports resolutions up to 1600 x 1200 @ 32-bit colour mode Attached USB (Universal Serial Bus) type A cable Nickel connectors Plastic housing Support Windows XP SP2 (32-bit) Vista & Win 7 (32 & 64-bit) Contents:1 x USB (Universal Serial Bus) 2.0 to DVI adaptor 1 x Driver CD 1 x User Manual System Requirements:PC with 1.2 GHz or higher Processor 512 Megabytes of RAM At least one USB (Universal Serial Bus) 2.0 port 30 MB of available disk space Super VGA (800 x 600) or higher resolution video card & monitor CD-ROM or DVD drive. The minimum hardware requirements for a PC capable of displaying a DVD on the monitor with the DVI Adaptor connected are:PC with Dual CPUs & 2.0 GHz processor 512 Megabytes of RAM or more if other applications are to running Set the resolution of monitor with the DVI Adaptor connected to 800 x 600 @ 16 bit colour. The included software can be installed on any desktop or laptop system running Windows XP (Service Pack 2) Home or Professional. There is no driver support for other platform or previous Windows versions. USB (Universal Serial Bus) 2.0 Hi-Speed Add up to 6 xtra Vi U units Auto enumerated without settings IDs Fully support either VGA or DVI interface (VCUB series supports BOTH VGA & DVI interface & both of the simultaneously) Supports resolution up 1600 x 1200 8 or 16 Bit ...

The USB (Universal Serial Bus)-954 is a gender changing coupler used to couple a type A male & a type B male together.



...

The USB2-952 gender changer is used for converting a standard type A plug into a type B plug for use with devices such as USB (Universal Serial Bus) 2.0 printers scanners etc. Specification :USB 2.0 compatible Gold contacts Nickel Connectors Gender Changer USB (Universal Serial Bus) 2.0 A Type Socket
- B Type Plug
...