The SATA IDE adaptor attaches to the back of all ATAPI ATA 133 100 66 33 EIDE & IDE storage devices (such as a Hard Drive DVD DVD Writer CD-ROM CD Writer etc) & allows the device to become compliant with Serial ATA Host devices.

Specification Serial ATA
- 1.5 Gbps (150 MB/s) Compliant with Serial ATA 1.0

Specification Supports 48-bit LBA (Large Disk) hard drives larger than 137 GB Supports spread spectrum clocking to reduce EMI Compatible with all EIDE & IDE Devices




...

Cable ties are manufactured from Nylon 66 with an operation temperature range of -40 to 85 degrees Celsius. Cables ties have multiple uses one of which would be cable management with a length of 300mm they are also ideal for network cable installations. Specification: Nylon Material Length 300mm Width 4.8mm Colour Silver Flame Rating 94V-2 ...

Graphene is a new type of two-dimensional carbon nanomaterial with a stable hexagonal honeycomb lattice composed of carbon atoms. Graphene shielding can cover almost 100% providing superior EMI protection. Coupled with a TPE jacket this makes the cable thin & flexible while keeping its strength. Our new range of Display Port 8k@60 Hz cables contain graphene shielding. Due to the graphene shielding & TPE jacket the cable can be made thinner & the bend radius is also far better. Specifications: 1m Slim Display Port Cable 8K@60 Hz TPE Jacket Graphene Shielding Supports HDR10 Supports HBR3 32.4 Gbps OD 4.2mm ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. UTP (Unshielded Twisted Pair) LSZH (Low Smoke Zero Halogen) Cat 5e Snagless Boot 24 AWGx 4P LS0H 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288 Length
- 3m Colour
- Green

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. UTP (Unshielded Twisted Pair) LSZH (Low Smoke Zero Halogen) Cat 5e Snagless Boot 24 AWGx 4P LS0H 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288 Length
- 5m Colour
- Blue

...

Category 6 cable commonly referred to as Cat-6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. UTP (Unshielded Twisted Pair) Cat 6 LS0H (Low Smoke Zero Halogen) Moulded Snagless Boot 24 AWGX4P 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3.C-TIA/EIA-568-B.2-1 & ISO/IEC 11801 &EN 50288 Length
- 30m Colour
- Grey

...

1.5m white straight to angled 3.5mm stereo jack cable plug to plug with 90 degree connector one end. 3.5mm Straight to Right Angle Male to Male Connectors 3.5mm Stereo Jack (TRS) Gold Plated White Length: 1.5 metre ...

1m white straight to angled 3.5mm stereo jack cable plug to plug with 90 degree connector one end. 3.5mm Straight to Right Angle Male to Male Connectors 3.5mm Stereo Jack (TRS) Gold Plated White Length: 1 metre ...

2m white straight to angled 3.5mm stereo jack cable plug to plug with 90 degree connector one end. 3.5mm Straight to Right Angle Male to Male Connectors 3.5mm Stereo Jack (TRS) Gold Plated White Length: 2 metre ...

UK double wall socket with 2 built in USB (Universal Serial Bus) charging ports the USB (Universal Serial Bus) charge ports can supply a shared maxium current of 2 Amps ie 2A from 1 port or 1A from both ports. Specifications Working voltage: 13A 250V Working temperature -15 to 40 C USB (Universal Serial Bus) Output: 2A 5V UK 3 pin socket output: 13A 250V Manufactured to BS1362 SS145 BSEN 60950 BS5733 Fits any standard back box (minimum depth of 25mm) Safety Information We recommend using a competent person for installation. Only suitable for indoor installations. Before carrying out any electrical work isolate the mains power supply & refer to the fitting instructions. For safe installation & connection ensure that the earth is connected. Wire/wiring colours are in accordance with the current IET Wiring Regulations Before use we recommend that a socket test is carried out. This device must be installed by a competent person in accordance with the current edition of the IET Wiring Regulations (BS7671) & Building Regulations. Please read these instructions carefully before commencing with installation. Failure to install correctly will negate the product warranty. The Dual Power Socket with Dual USB (Universal Serial Bus) Outlet means that you can charge / power 2x USB (Universal Serial Bus) devices & 2 other electrical items from one double wall plate. The USB (Universal Serial Bus) charging sockets are compatible with items such as smart phones tablets & other devices that require charging via a USB (Universal Serial Bus) port. The USB (Universal Serial Bus) charging sockets have a total output of 2 amps (combined); if the current exceeds this it will automatically shut down to protect your device. This dual switched socket will fit any standard dual 25mm deep wall box. Instructions Firstly ensure you isolate the mains power supply & remove the fuse in the fuse box or switch off the circuit breaker in the consumer unit. Following the diagram over-leaf pass the cable through the entry holes & connect to the appropriate terminal. If an Earth loop connection is required use the additional earth terminal block located in the back box. Re-connect the mains supply when the installation is correctly completed. Before use we recommend that a socket test is carried out. DO NOT MEGGER TEST
- this will damage the USB (Universal Serial Bus) charging circuit.
...