4 Pin molex to SATA 15 pin power adaptor for converting a spare molex connector to SATA power. Specification: 4 Pin female molex 15 pin male SATA power Gold flashed contacts ...

The SB-474 is a VGA/SVGA monitor 4 Way manual switch. Specification: VGA/SVGA Monitor 4 Way Manual Switch. Metal case for full shielded. Gold plated connectors. Heavy duty rotary switch. Anti-skid rubber feet. ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 1.5 Metre Yellow UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

1m White CAT6A Ethernet Cable Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

2m White CAT6A Ethernet Cable Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

The Newlink 4 way HDMI splitter allows one input to be split into 4 identical outputs. The splitter supports HDMI v 2 has the bandwidth to run two displays at resolutions up to 4k@60 Hz & also supports HDCP 2.2. The splitters have 3.5mm stereo output for local speakers etc to avoid multiple audio outputs from TVs or Displays. Both versions have metal housing making them very sturdy. Rubber feet provide an anti-slip functionality. Specification: HDMI V2 Splitter 4k@60 Hz Additional 3.5mm Stereo output 1 HDMI Input 4 HDMI outputs plus 1x 3.5mm output. Supports HDCP 2.2 Max Recommended Cable Lengths: 3mtr in 5mtr out (could be longer with active or fibre cables) Contents 2 Port HDMI Splitter 5v 1A Power Supply ...

The NLUSB3C-422 is a USB (Universal Serial Bus) Type C to USB (Universal Serial Bus) 3.0 four port hub designed for connecting four USB (Universal Serial Bus) devices to a host computer with a USB (Universal Serial Bus) Type C socket. The hub features a USbtwo Type A sockets & two Type C sockets.

Specification USB (Universal Serial Bus) 3.1 Gen 2 (10 Gbps transfer speed)* 2 x USB (Universal Serial Bus) Type C ports 2 x USB (Universal Serial Bus) Type A ports Slim design Backwards compatible with previous USB (Universal Serial Bus) versions Plug n Play LED power indicator * Transfer speeds will vary depending on devices connected

...

50m Fibre Optic HDMI Cable with active technology uses a fibre optic cable to carry the HDMI signal over long distances with no quaility reduction or interference. The HDMI signal can be carried much further using an optical cable than a traditional copper cable & reduces the risk of interference. HDMI AOC cables also have copper wires inside to carry the power so no external power adapter is required.

Specification Send an HDMI signal 50 metres Ultra low loss interference resistant fibre optic cable Supports resolutions up to 4k (2160p) at 60 Hz Compliant with HDMI v 2.0 / 1.4 equipment features Supports 4k HDR Supports HDCP EDID CEC DDC Plug & Play no driver required Highly resistant to EMI & RFI Data Rate: 18 Gbps Low power consumption no external power supply needed

...

75m Fibre Optic HDMI Cable with active technology uses a fibre optic cable to carry the HDMI signal over long distances with no quaility reduction or interference. The HDMI signal can be carried much further using an optical cable than a traditional copper cable & reduces the risk of interference. HDMI AOC cables also have copper wires inside to carry the power so no external power adapter is required.

Specification Send an HDMI signal 75 metres Ultra low loss interference resistant fibre optic cable Supports resolutions up to 4k (2160p) at 60 Hz Compliant with HDMI v 2.0 / 1.4 equipment features Supports 4k HDR Supports HDCP EDID CEC DDC Plug & Play no driver required Highly resistant to EMI & RFI Data Rate: 18 Gbps Low power consumption no external power supply needed

...

The NLUSB2-202A is a multi-port USB2 hub that maximises the capacity of 1 USB (Universal Serial Bus) port by creating an extra 2 USB (Universal Serial Bus) ports. The NLUSB2-202A is a fantastic plug & play solution for those who find USB (Universal Serial Bus) ports scarce within a laptop or desktop.

Specification Full compliance with USB (Universal Serial Bus) 1.1 & USB (Universal Serial Bus) 2.0 specifications. Supports Low Speed (1.5 Mbps) Full Speed (12 Mbps) & High Speed (480 Mbps) Data transfer rates. Connects up to 127 USB (Universal Serial Bus) Devices. Over current detection & protection. Bus powered from USB (Universal Serial Bus) port no power adaptor needed. Suitable for mobile PC Environment. No Driver needed for Windows ME 2000 & XP. Or Mac OS 10.1 or later. Driver Supplied for Windows 98SE. Easy Plug & Play installation.

...