2 Port Manual HDMI Switch with 4k support. The HDMI Bi-Directional Switch will allow you to switch between to two different source devices to a display or allow you to switch which display a source device transmits to. Features Supports 3D Supports HDMI specifications up to HDMI v 2.0 Does not require an additional power supply LEDs to indicate the active port Specifications 4k 30HZ
- The HDMI input/output cable length can be up to 5m 4k 60 Hz 4:2:0
- The HDMI input/output cable length can be up to 5m 4k 60 Hz 4:4:4
- The HDMI input/output cable length must be less than 1m


...

HDMI female to female swivel adaptor Specification Transfer Bandwidth: 10.2 Gbps/340 M Hz (v 1.3) Signal Type: Transmission Minimised Differential Signalling (TMDS) Connector Type: Gold Plated ...

HDMI to component video converter converts HDMI to component video YPb Pr plus audio left & right.

Specification HDMI

...

The HDMI to composite video converter accepts an HDMI signal & converts it to composite video (CVBS) with stereo audio this means that you can use modern equipment with older TVs that dont not have an HDMI input. In some cases extra power will be needed via the micro USB (Universal Serial Bus) port which is provided by connecting the included USB (Universal Serial Bus) Micro B cable.

Specification Converts HDMI to composite video CVBS (yellow phono) Digital to Analogue Converter Chipset (DAC) Supports NTSC & PAL output Input: 1 x HDMI Output: 1 x Composite (yellow) & L/R audio (red/white) Output Resolution: PAL NTSC 480i 576i Impedance: 75ohms HDCP Compatible Power: DC5V Extra power can be applied via the micro USB (Universal Serial Bus) socket Use with a 3x phono cable & scart adapter 3SR3-11 to make an HDMI to Scart Converter.

...

The HDPORT-0054K-CABREV is a HDMI to Display Port adapter which means that you can transmit a video signal from a HDMI source (PC etc..) to a Display Port monitor. The product supports Display Port v 1.2 & resolutions up to 4096 x 2160 @ 60 Hz. It is also equipped with USB (Universal Serial Bus)-A port to supply power in the event the HDMI source doesn’t provide enough power.

Specification Support HDMI input Display Port output with USB (Universal Serial Bus)-A port for power supply Connect a PC or Laptop with HDMI to a Displayport monitor. HDMI Supports 8-bit Deep colour Supports HDCP 1.4 / 2.2 Supports HDR Supports Status & Control Data Channel (SCDC) Supports resolutions up to 4K x 2K @ 60 Hz for 4:4:4 format Display Port DP 1.2a compliant Supports resolutions up to 4K x 2K @ 60 Hz for 4:4:4 format Supports four lanes with 1.62 Gbps (RBR) 2.7 Gbps (HBR) or 5.4 Gbps (HBR2) data rate Supports 8-bit deep colour Supports Hot-Plug detect USB (Universal Serial Bus)-A Connect this port to the source with a USB (Universal Serial Bus)-A female port or to a USB (Universal Serial Bus) Power Adapter for supplying extra power to the product in the event that the HDMI source can’t supply enough power (under 300m A).

...

HDMI type A to HDMI type A female/DVI female Specification 1x Male HDMI to 1x Female HDMI & 1x Female DVI Splitter Leaded adaptor High speed HDMI cable Gold plated connectors DVI-D Connector 12cm lead ...

HDMI female to micro HDMI male adapter. The HDMI Micro connector was defined in the HDMI 1.4

Specification & is called

...

D25 male to 36 Centronic male printer cable. Specification: IEEE 1284 Printer Cable D25 Male
- 36 Centronic Male Moulded IEEE 1284-1994
...

The DVI-D to HDMI adapter passes DVI-D signals through to the compatible pins in the HDMI spec for use with HDMI equipment. Please note while this uses the DVI-D 24+1 (25 pin) dual link connector this is single link as HDMI is 19pin with a resolution of 1920x 1080. DVI-D does not carry audio so the HDMI ouput will not have audio either. The DVI connector is compatible with DVI-D DVI-I & DVI-A connectors but will only pass single link DVI digital signals. Can be used in either direction. DVI-D 24+1 pin male to HDMI 19 pin female Gold flashed contacts Black moulded connectors Length: 15cm ...

The MHL 2.0 (Mobile High-Definition Link) Adapter supports video resolution up to 1080p & 7.1-channel digital multi-channel audio. It is designed to connect your MHL Host (Phone or Tablet) to your HDTV VIA HDMI for viewing content on a larger screen. This state-of-the-art technology connects your MHL Host to your monitor or TV from the 11 pin Micro USB (Universal Serial Bus) port to the HDMI port. The 11 pin Micro USB (Universal Serial Bus) connection is found on most Samsung devices starting from the Galaxy S3 although the S3 is an MHL v 1.0 device it needs the MHL v 2.0 adapter because it uses the new proprietary 11 pin Micro USB (Universal Serial Bus) socket. Devices enabled with MHL 2.0 can use the Remote Control Protocol (RCP) function for controlling audio & video with the HDTV remote & it charges your device during playback.

Features: Supports 1080p video resolution Supports all bandwidth between 25-75 M Hz Supports RCP (Remote Control Protocol) Supports 3D Compatible with.. Samsung Galaxy S3 Galaxy S3
- (MHL v 1.0) Galaxy S4 Galaxy S5 Galaxy Note 2
- (MHL v 1.0) Galaxy Note 3 Galaxy Note 8.0 Galaxy Note 10.1 (2014) Galaxy Tab 3 (8" & 10") Galaxy Mega Micro USB (Universal Serial Bus) 11 Pin Only For MHL devices with 5 pin Micro USB (Universal Serial Bus) connectors please use product code HDMI-MHL



...