Category 6 cable commonly referred to as Cat-6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. UTP (Unshielded Twisted Pair) CAT 6 Moulded 24AWG x 4P Patch Type CM (UL) CMH ISO/IEC 11801 & EN 50288 & TIA/EIA-563-B.2-1 ETL/3P VERIFIED Length
- 0.25m Colour
- Black

...

3 Meter Cat 6 LSOH Network Ethernet Patch Cable GREENHigh quality CAT6 network patch cable.RJ45 connector each end.LSOH CAT6 cable. Moulded connector boot. Length 3m Colour green. ...

CAT 6 Punchdown Krone coupler in white for connecting Cat 6 cables suitable for solid Cat 6 & colour coded for easy installation. Specification: CAT 6 Punchdown / Krone Coupler White Colour Coded Suitable for solid cable Internal Use ...

0.5m CAT6A Network Cable Orange 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

10m CAT6A Network Cable Orange 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

The desk tidy cable holders have one or two ports/channels to organise cables. They have a self-adhesive bottom that will stick firmly to most surfaces but at the same time is easy to remove. Each channel will hold either a large cable or a few thin cables.

Specification Cable Tidy Self Adhesive Easy to remove Pack size 10 Colour Black Holds one thick cable or a few thin cables

...

The desk tidy cable holders have one or two ports/channels to organise cables. They have a self-adhesive bottom that will stick firmly to most surfaces but at the same time is easy to remove. Each channel will hold either a large cable or a few thin cables.

Specification Cable Tidy Self Adhesive Easy to remove Pack size 20 Colour Black Holds one thick cable or a few thin cables

...

The desk tidy cable holders have one or two ports/channels to organise cables. They have a self-adhesive bottom that will stick firmly to most surfaces but at the same time is easy to remove. Each channel will hold either a large cable or a few thin cables.

Specification Cable Tidy Self Adhesive Easy to remove Pack size 10 Colour Blue Holds one thick cable or a few thin cables

...

The desk tidy cable holders have one or two ports/channels to organise cables. They have a self-adhesive bottom that will stick firmly to most surfaces but at the same time is easy to remove. Each channel will hold either a large cable or a few thin cables.

Specification Cable Tidy Self Adhesive Easy to remove Pack size 20 Colour Blue Holds one thick cable or a few thin cables

...

The desk tidy cable holders have one or two ports/channels to organise cables. They have a self-adhesive bottom that will stick firmly to most surfaces but at the same time is easy to remove. Each channel will hold either a large cable or a few thin cables.

Specification Cable Tidy Self Adhesive Easy to remove Pack size 10 Colour Green Holds one thick cable or a few thin cables

...