The CDL-DV001 is a DVI-A to VGA adaptor DVI-A uses the analog signals from the DVI connector for use with a VGA monitor. * Please note this does not convert digital signals in analog so will not work with DVI-D. Specification DVI-A to VGA Analog only pins connected Gold contacts Black casing ...

The CDL-DV006 is a DVI-D to HDMI adaptor this adaptor uses the digital signals from the the DVI-D connector for HDMI use. * Please note DVI-D does not carry audio so the HDMI ouput will have no audio. Specification DVI-D 25 Pin Male HDMI 19 Pin Female Gold flashed contacts ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 10 Metre Blue UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...

25m ethernet cable blue CAT5e UTP. Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet.

Specification 25 Metre Blue UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P

...

4m ethernet cable blue CAT5e UTP. Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet.

Specification 4 Metre Blue UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P

...

The 1394 adaptor 6 pin (6 circuit Firewire 400) female to 4 pin (4 circuit Firewire 400) male (Alternative) would be typically used to convert 6 pin to 4 pin for devices such as camcorders. Please note: While these adaptors have been given USB (Universal Serial Bus) part codes these are firewire only. Please check wiring

Specification before ordering as there are difference between the 910 & 910A.

Specification Firewire 400 adaptor 6 Pin Female
- 4 Pin Male Nickel connectors Firewire Adaptor 6 Pin Female
- 4 Pin Male





...

The UT-89904F is a faceplate it utilises wall space by allowing you to make a 1 to 4-Port network socket in the position of your choosing. Providing there are four CAT5e cables running to the designated location of the UT-89904F creating a neat & useful 4-port Ethernet source. To be used with:UT-8700 Cat 5e modules UT-89900B Blanking plates Specification • UK Type dual gang faceplate• 85mm x 145mm• Space for four modules• Screws supplied ...

HD15 high density female to female slimline gender changer. The HD15 high density differs from the D15 low density in that the pins are configured in three rows (VGA) as opposed to two rows (gameport MIDI port etc).

Specification 15 pin female to female adaptor HD15 high density D-type Slimline All pins connected Voltage Rating: 300v Amp rating: 5A

...

4 Port HDMI 1.4 High Speed Splitter supports features from the HDMI High Speed standard. With 340 M Hz bandwidth it can split a standard or 3D input to four displays & supports all resolutions including 1080p & 4K by 2K resolutions. Specification: HDMI High Speed 1.4 3D Support 1080p & 4K by 2K resolution support 4 Port splits an input to 4 displays. HDCP Compliant Compatible with older HDMI equipment. 340 M Hz bandwidth 3.2 Gbps per channel (10.2 Gbps total) Supports 12bit per channel deep colour (36bit in total) Supports uncompressed audio & compressed audio CE Certified Devices with DVI are not recommended due to the lack of signal control Contents 4 Port HDMI Splitter Power supply ...

HDMI 3 to 1 switch / IR remote

Specification Supports HDMI 1.3b Full HD 1080p Supports 12-bit Deep Colour High Performance

...