Cable ties are manufactured from Nylon 66 with an operation temperature range of -40 to 85 degrees Celsius. Cables ties have multiple uses one of which would be cable management with a length of 200mm they are also ideal for network cable installations. Release tab for easy removal & re-use. Specification: Nylon Cable Tie Length 200mm Width 4.8mm Packs of 100 Flame Rating 94V-2 ...

20m F type cable for satellite or cable tv connections screw on F connectors suitable for Sky Sky HD Virgin Media & Virgin Media HD etc.F Connectors each end Male
- Male Screw-on 75ohm Coaxial Cable Gold connectors Colour black Length 20 Meter
...

20m HDMI Cable High Speed with ethernet HDMI Cable

Specification 20m HDMI high speed with ethernet. Compatible with

...

20m white HDMI cable high speed with ethernet supports HDMI 1.4 & HDMI 2.0 equipment functions backwards compatible with older HDMI revisions.

Specification HDMI High Speed with Ethernet Supports 3D over HDMI Supports 4K x 2K Resolution Supports 1080p Resolution Audio return channel HDMI Ethernet channel Gold flashed contacts White PVC jacket & hoods Length 20 Meter

...

25 way female
- RJ45 8 pin socket Specifications: Unassembled modular adaptor D25 female
- RJ-45 female Nickel connector Plastic

...

The NLDP-AOC range of cables use a combination of fibre optic & metal cores to transmit a Display Port signal beyond the usual limits of a passive cable. Due to its construction it can send the signal up to 30 metres without using additional boosters or extenders. The use of fibre optical cores also allows the cable to be thinner & lighter.

Specification Display Port v 1.4 25m Bandwidth up to 32.4 Gbps Displayport Compliance: HBR3 compatible with HBR2 Bit Rate: Max YCb Cr 4:2:2 10 Bit Supports: HDR HPD & HDCP2.1 Supports resolutions up to: 8K @ 30 Hz & 4K @ 120 Hz Highly resistant with EMI & RFI Zinc alloy shells No external power needed This cable must be connected with the Source connector & Display connector connected the correct way round

...

25m Long CAT6A SSTP Ethernet Cable Grey LSOH 10 G Base-T Pure Copper Category 6A Network cable commonly referred to as CAT6A is a cable standard for up to 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSOH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). SFTP (or SSTP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

25m Long Network Cable CAT6A LSOH SSTP Black 10 G Base-T Pure Copper Category 6A network cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSOH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). SFTP (or SSTP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a "bubble" which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

25m Long CAT6A SSTP Network Cable Blue LSOH 10 G Base-T Pure Copper Category 6A network cable commonly referred to as CAT6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSOH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). SFTP (or SSTP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a "bubble" which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

2m white 3.5mm jack cable straight to angled 90 degree 3.5mm jack plugs ideal to be used in tight spaces. ...