30m CAT6A Network Cable White for 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Length 30 metre ...

The NLDP-AOC range of cables use a combination of fibre optic & metal cores to transmit a Display Port signal beyond the usual limits of a passive cable. Due to its construction it can send the signal up to 30 metres without using additional boosters or extenders. The use of fibre optical cores also allows the cable to be thinner & lighter.

Specification Display Port v 1.4 30m Bandwidth up to 32.4 Gbps Displayport Compliance: HBR3 compatible with HBR2 Bit Rate: Max YCb Cr 4:2:2 10 Bit Supports: HDR HPD & HDCP2.1 Supports resolutions up to: 8K @ 30 Hz & 4K @ 120 Hz Highly resistant with EMI & RFI Zinc alloy shells No external power needed This cable must be connected with the Source connector & Display connector connected the correct way round

...

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs.

Specification

...

36 Centronic male to male printer cable. Specification: Parallel Printer Cable 36 Centronic Male
- Male 3 Meter Moulded grey PVC
...

For 3.5mm Jack Plug to 6.3mm (1/4inch) Jack Plug audio equipment. Being bi-directional it can also be used to connect from a mono 6.35mm device into a 3.5mm mono connection or vice versa. Gold flashed contacts for better connection & anti-corrosion properties.

Specification 6.35mm Mono Jack Plug 3.5mm Mono Jack Plug Length 3 meter For mono audio connections Gold connectors

...

3mtr 19 Pin HDMI male to male cable high speed with ethernet.

Specification HDMI Type A Cable Supports 1080p & 2160p

...

3m High Speed with Ethernet HDMI Cable

Specification 3m HDMI high speed with ethernet. Supports HDMI 1.4 & HDMI 2.0

...

Category 6 cable commonly referred to as Cat-6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz.

Specification 3 Meter Yellow UTP (Unshielded Twisted Pair) Cat 6 250 M Hz LSZH (Low Smoke Zero Halogen) Moulded Snagless Boot 24 AWG X4P 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3.C-TIA/EIA-568-B.2-1 & ISO/IEC 11801 & EN 50288

...

3m white HDMI extension cable high speed with ethernet compatible with all HDMI equipment including HDMI 1.4 & HDMI 2.0. Male to female HDMI extension lead ideal to extend an existing HDMI cable. Specification: HDMI Ethernet Channel Audio Return Channel ARC 3D 4k x 2k Support HDMI High Speed with Ethernet extension cable HDMI Type A Male to HDMI Type A Female Gold Flashed Connectors Length 3 Meter 30 AWG Supports all HDMI equipment specifications including HDMI 1.4 & HDMI 2.0 ...

Ideal for extending an existing ethernet cable by 3m CAT5e pure copper. ...