Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 5 Meter Yellow UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet.

Specification 5 Meter Blue FTP (Foil Twisted Pair) Cat 5e Moulded Snagless Boot Verified For Gigabit Ethernet 26AWG X 4P TYPE CM (UL) C (UL) CMH ISO/IEC 11801 & EN 50288

...

Category 6 cable commonly referred to as Cat-6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz.

Specification 5 Meter Blue FTP (Foil Twisted Pair) Cat 6 250 M Hz F/UTP foil screened LSZH (Low Smoke Zero Halogen) Snagless Boot 26AWG X4PR ISO/IEC 11801 & TIA/EIA 568B.2-1

...

5m CAT6A Patch Cable Blue 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

5m CAT6A Patch Cable Red 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Available in 0.5 1 2 3 5 & 10 metre lengths All lengths are available in grey yellow red blue green & black. ...

HDPro 5m DVI-D Dual Link Digital Cable with gold plated connectors & EMI suppressors. Limited lifetime warranty against manufacturing defects. ...

AOC is short for Active Optical Cable which is the latest in cabling technology. AOC removes the copper conductors & replaces them with fibre optic cores & a small transmitter & receiver in the connectors. Copper cores still remain to carry power along the cable. Why Professionals Are Choosing AOC? The use of fibre optic cores allows the cable to be thinner & lighter The barriers of cable length is no longer a problem By using fibre optical cores EMC interference from power cables & lighting is no longer an issue. The cables also produce much less EMC themselves No signal loss over long distances No extenders boosters or runs of CAT5e needed. These simply connect to your host & device like a standard cable Our AOC comes in frustration free packaging

Specification Fibre Optic Display Port Cable Length 5m Supports up to 8k@60 Hz resolution Display Port 1.4 HBR 3 Metal Connectors 4 Fibre cores / 8 Copper cores Cable Outer Diameter 4.8mm CPR rated Frustration free packaging This cable must be connected with the Source connector & Display connector connected the correct way round

...

AOC is short for Active Optical Cable which is the latest in cabling technology. AOC removes the copper conductors & replaces them with fibre optical cores & a small transmitter & receiver in the connectors. Copper cores still remain to carry power along the cable. The use of fibre optical cores allows the cable to be thinner & lighter The barriers of cable length is no longer a problem By using fibre optical cores EMC interference from power cables & lighting is no longer an issue. The cables also produce much less EMC themselves No signal loss over long distances No extenders boosters or runs of CAT5e needed. These simply connect to your host & device like a standard cable Our AOC comes in frustration free packaging These cables do not support video or power delivery. Specification: USB (Universal Serial Bus) 3.1 C Male to USB (Universal Serial Bus) 3.1 C Male Supports 10 Gbps Metal Connectors 4 Fibre cores / 4 Copper cores Supports 5v 900m A Cable Outer Diameter 4.5mm Cable Bend Radius 9mm CPR rated Length 5 meters Frustration free packaging ...

Category 6 cable commonly referred to as Cat-6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. Specification 5 Mtr Green UTP (Unshielded Twisted Pair) CAT 6 Moulded 24AWG x 4P Patch Type CM (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 & TIA/EIA-563-B.2-1 ETL/3P VERIFIED ...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 5 Mtr Grey FTP (Foil Twisted Pair) Cat 5e Assembled Verified For Gigabit Ethernet 26AWG 4P TYPE CM (UL) C (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 3P ...