24-Port CAT 5E PUNCH DOWN PATCH PANELFeatures Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements. Support T568 A&B wiring & Easy installation Dual IDC connector can accept 22-26 AWG ...

25 Way Hood Plastic Specification: 9 Way Hood Plastic (grey) Long Thumb Screws ...

25cm CAT6A Network Cable Orange Pure Copper Shielded Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Length 0.25m Colour Orange ...

25m Ethernet Cable CAT6 UTP LSOH Ethernet Cable BLACKHigh quality CAT6 network patch cable.RJ45 connector each end.LSOH CAT6 cable. Moulded connector boot. Length 25m Colour black. ...

Our economy range of audio cables are assembled with Nickel connectors for your low cost audio needs. The 1RR-25 is a nickel single RCA cable (sometimes known as a phono cable) for use with audio equipment typical use would be for mono applications or as a left channel on stereo equipment. Specification: RCA plug to RCA Plug 25 Meter Nickel connectors ...

25m Snagless Network Cable CAT6 UTP Grey. CAT6 is a twisted pair cable used to connect network equipment. Most cables are unshielded relying on the twisted pair design for noise rejection. Ideal for connections between modems routers & network switches suitable for home & office use.

Specification Length 25 Meter Colour Grey UTP (Unshielded Twisted Pair) CAT6 250 M Hz Pure Copper Cable Low Smoke Zero Halogen (LSOH) Snagless Boot 24 AWG x 4P (4 Pairs) 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288

...

3.5mm extension lead male jack plug to female socket cable 2m can be used to extend a 3.5mm jack cable or as a headphone extension cable. ...

6 pin mini din PS/2 extension cable. Specification: 6 Pin Mini Din Male
- Female 28awg Foil shield & drain Gold Flashed Contacts
...

6 pin mini din male to male PS/2 cable. Specification: PS/2 Data Cable 6 Pin Mini Din Male
- Male Straight PVC Grey jacket Foiled
...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 2 Meter Black UTP (Unshielded Twisted Pair) CAT5e 100 M Hz Moulded Connectors 26AWG 4PR ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3P ...