AOC (Active Optical Cable) is the latest in cabling technology. AOC removes the copper conductors & replaces them with fibre optic cores & a small transmitter & receiver in the connectors. Copper cores still remain to carry power along the cable. Why Use AOC? The use of fibre optic cores allows the cable to be thinner & lighter The barriers of cable length is no longer a problem By using fibre optical cores EMC interference from power cables & lighting is no longer an issue. The cables also produce much less EMC themselves No signal loss over long distances No extenders boosters or runs of CAT5e needed. These simply connect to your host & device like a standard cable Our AOC comes in frustration free packaging

Specification HDMI Active Optical Cable Compatible with Xbox Series X PS5 & Nvidia RTX3090 Length 20m Supports 8K@60 Hz (48 Gbps) HDMI A Male to HDMI A Male Supports Chroma Subsampling 4:4:4 Supports 48 Gbps Metal Connectors 4 Fibre optic cores / 7 Copper cores Cable Outer Diameter 4.5mm CPR rated Frustration free packaging This cable must be connected with the Source connector & Display connector connected the correct way round

...

20m Network Cable CAT6A SSTP LSOH 10 G Base-T Pure Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSOH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). SFTP (or SSTP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

20m OM3 LC to LC fibre optic network cable LC to LC connectors aqua colour low smoke zero halogen jacket with 50µm fibre core & 125µm cladding. The OM3 range of optic fibre network cables offer a higher bandwidth & greater distance over OM2 cables.

Specification • LC
- LC Connectors • 50µm core 125µm cladding • Duplex • Multi-mode • OM3 • Supports 10 Gb • Length 20 Meter • Aqua LSZH jacket • Insertion Loss 0.3d B • Diameter 3.0mm • Bend radius: 60mm • Operating temperature: -20
- 60°C



...

20m Snagless Network Cable CAT6 UTP Green. CAT5e is a twisted pair cable used to connect network equipment. Most cables are unshielded relying on the twisted pair design for noise rejection. Ideal for connections between modems routers & network switches suitable for home & office use.

Specification Length 20 Meter Colour Green UTP (Unshielded Twisted Pair) CAT6 250 M Hz Pure Copper Cable Low Smoke Zero Halogen (LSOH) Snagless Boot 24 AWG x 4P (4 Pairs) 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288

...

20m White Audio Extension Cable 3.5mm Male to Female 3.5mm Male Jack Plug to Female Socket Cable 20m. ideal to be used as headphone extension cable. 3.5mm male jack plug to 3.5mm female socket. Gold plated contacts. Length 20m Colour White ...

24 Port CAT6A Shielded Network Patch Panel
- In line coupler type Specification: 24 CAT6A RJ45 Ports Shielded in-line couplers
...

The UT-899544 is a 24-Port 1U rack mountable CAT6 patch panel which is a great solution for network & cable management. The UT-899544 offers a clearly labelled neat & effective CAT6 pass through panel which is ideal for the heart of any small network. Please note: The instructions included are for general installation of patch panels for specific instructions please see download section. Specification: Meets the TIA/EIA-568-B.2 Category 6 Channel Testing Performance requirements. Support T568 A & B wiring & Easy installation. Dual IDC connector can accept 22-26 AWG solid & stranded UTP cables. Compatible with 110 or Krone Tools. All versions can be mounted in 19” Racks. 19" Cable management bar included ...

25cm CAT6A Network Cable Full Copper Shielded Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Length 0.25m Colour Grey ...

25cm CAT6A Network Cable Yellow Full Copper Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Length 25cm Colour Yellow ...

Our slim range of Gigabit ethernet cables have an outer diameter of only 2.8mm making these cables ideal for high-density networking set-ups such as inside racks & cabinets. The ERSLIM range are tested to CAT6 specifications but because the cables are 32AWG they are not recommended for use with Power over Ethernet (Po E).

Specification CAT6 UTP (Unshielded Twisted Pair) Gigabit Ethernet Cable / Patch Cable Super slim 2.8mm diamter Moulded connectors 32 AWG (Stranded) full copper pairs Low smoke zero halogen LSZH / LSOH Length 25cm 0.25m Colour white

...