20m Snagless Network Cable CAT6 UTP Black. CAT5e is a twisted pair cable used to connect network equipment. Most cables are unshielded relying on the twisted pair design for noise rejection. Ideal for connections between modems routers & network switches suitable for home & office use.

Specification Length 20 Meter Colour Black UTP (Unshielded Twisted Pair) CAT6 250 M Hz Pure Copper Cable Low Smoke Zero Halogen (LSOH) Snagless Boot 24 AWG x 4P (4 Pairs) 3P VERIFIED FOR GIGABIT ETHERNET IEC 332.3C-TIAEIA-563-B.2 & ISO/IEC 11801 & EN 50288

...

20m Black RJ11 ADSL modem cable connects a broadband router to an ADSL microfilter. 4 core straight wired lead. ...

20m CAT6 Network Cable Blue Category 6 cable commonly referred to as CAT6 is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the CAT5/5e & Category 3 cable standards. Compared with CAT5 & CAT5e CAT6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 MHz. Ideal for home or office use.

Specification Length 20m Blue UTP (Unshielded Twisted Pair) CAT 6 Moulded 24AWG x 4P (4 Pairs) Patch Type CM (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 & TIA/EIA-563-B.2-1 ETL/3P VERIFIED

...

Category 5e cable is a twisted pair high signal integrity cable type often referred to as Cat 5e. Most cables are unshielded relying on the twisted pair design for noise rejection some are shielded. Often used in computer networks such as Ethernet. Specification 20 Meter Green UTP (Unshielded Twisted Pair)CAT5e Moulded Verified for Gigabit Ethernet 24AWG x 4P Type CM (UL) CMH E164469-F3ISO/IEC 11801 & EN 50288 & TIA/EIA-568-B.2 3 P Full copper cable ...

20m CAT6A SSTP Ethernet Cable Grey LSOH 10 G Base-T Pure Copper Category 6A Network cable commonly referred to as CAT6A is a cable standard for up to 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSOH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). SFTP (or SSTP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified ...

The NLDP-AOC range of cables use a combination of fibre optic & metal cores to transmit a Display Port signal beyond the usual limits of a passive cable. Due to its construction it can send the signal up to 30 metres without using additional boosters or extenders. The use of fibre optical cores also allows the cable to be thinner & lighter.

Specification Display Port v 1.4 20m Bandwidth up to 32.4 Gbps Displayport Compliance: HBR3 compatible with HBR2 Bit Rate: Max YCb Cr 4:2:2 10 Bit Supports: HDR HPD & HDCP2.1 Supports resolutions up to: 8K @ 30 Hz & 4K @ 120 Hz Highly resistant with EMI & RFI Zinc alloy shells No external power needed This cable must be connected with the Source connector & Display connector connected the correct way round

...

20m Pro Grade DVI to HDMI Cable Gold Plated for the ultimate in high definition picture transfer. ...

Ideal for home or office ethernet connections.

Specification High quality CAT5e network patch cable. RJ45 connector

...

20m Ethernet Cable CAT6A violet. Category 6A Ethernet cable commonly referred to as Cat 6A is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T 100BASE-TX (Fast Ethernet) 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6 Cat 5e & Cat 5. LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). Snagless Connectors: The connectors feature a “bubble” which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device. This product has been tested & found to comply with the applicable electrical transmission characteristics specified in: ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 IEC 60332-1-2 Ro HS Compliant & 3P Verified Length 20m ...

LC-LC Fibre optic cable 62.5/125 20m OM1 ...